journal article·2010-01

Effect of moisture content of concrete on water uptake

P. Rucker-Gramm, R.E. Beddoe

Cement and Concrete Research· Volume 40· Issue 1
Publisher page

Abstract

Abstract The penetration of water and non-polar hexane in Portland cement mortar prisms with different initial moisture contents was investigated using nuclear magnetic resonance (1H NMR). The amount of water in gel pores strongly affects the penetration of water in much larger capillary pores. Water penetration is reduced by the self-sealing effect as characterized by non-√t dependence of capillary uptake and penetration depth. This is explained by the ongoing redistribution of water from capillaries into gel pores which results in internal swelling and loss of continuity of the capillary pore system; a correlation was observed between the amount of redistributed water and departure from √t behaviour. A descriptive model is used to explain the dependence of water uptake and penetration on moisture content. For increasing initial moisture contents up to a critical value equivalent to equilibrium with a relative humidity between 65 and 80%, less penetrating water is able to redistribute. Thus more penetrating water is in larger capillaries with less viscous resistance; uptake and penetration depth increase. Above the critical initial moisture content, uptake and penetration depth decrease towards zero. This is explained by (a) an overall reduction in capillary pressure because transport takes places in fewer and larger pores and (b) an increase in viscous resistance due to the connection of penetrating capillary water with pores already containing water. Less capillary pore space is available for transport. The surface region of concrete placed in contact with water is not instantaneously saturated. Water content increases with time depending on the degree of surface saturation. A new transition coefficient for capillary suction γ is defined for the calculation of surface flux.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Water anomoly in capillary liquid absorption by cement-based materials10.1007/BF00291799 ↗
2. Transport of organic fluids through concrete10.1007/BF02480390 ↗
3. Water and salt in the pore structure of cementitious building materials — modelling the mechanisms10.1002/best.200600483 ↗
4. Self-sealing property of concrete — experimental evidence10.1007/BF02498563 ↗
5. Porosity and liquid absorption of cement paste10.1007/BF02498561 ↗
6. P. Lunk, Capillary penetration of water and salt solutions into concrete, Building Materials Report No. 8, ETH, Laboratory for Building Materials, Zürich, Aedificatio publishers, 1997, in German.
7. Fluid absorption properties of concrete in relation to the moisture content of the specimens and temperature
8. The statistical thickness and the chemical potential of adsorbed water films10.1016/0021-9797(81)90395-7 ↗
9. M. Krus, Moisture transport and storage coefficients of porous mineral building materials, theoretical principles and new test methods, PhD thesis. 1995, University of Stuttgart, Fraunhofer IRB Verlag, 1996, ISBN 3-8167-4535-0.
10. Hygral stress in hardened cement paste10.1007/BF02481700 ↗
11. P. Rucker-Gramm, Modelling the transport of moisture and salt in cementitious building materials considering the self-sealing effect, PhD thesis, 2008, Technische Universität München, in German.