Strength, leachability and microstructure characteristics of cement-based solidified plating sludge
Source abstract
Abstract
The solidification of the stabilized zinc-cyanide plating sludge was carried out using ordinary Portland cement (OPC) and pulverized fuel ash (PFA) as solidification binders. The plating sludge were used at the level of 0%, 10%, 20% and 30% dry weight, and PFA was used to replace OPC at 0%, 10%, 20% and 30% dry weight, respectively. Experimental results showed that a significant reduction in strength was observed when the plating sludge was added to both the OPC and OPC/PFA binders, but the negative effect was minimized when PFA was used as part substitute for OPC. SEM observation reveals that the deposition of the plating sludge on the surface of the clinkers and PFA could be the cause for hydration retardation. In addition, calcium zinc hydroxide hydrate complex and the unreacted di- and tricalcium silicates were the major phases in X-ray diffraction (XRD) patterns of the solidified plating waste hydrated for 28 days, although the retardation effect on hydration reactions but Cr concentration in toxicity characteristic leaching procedure (TCLP) leachates was lower than the U.S. EPA regulatory limit.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Solid state 29Si and 27Al NMR and FTIR study of cement pastes containing industrial wastes and organics10.1016/0008-8846(95)00138-3 ↗
2. Early heat of hydration during the solidification of a metal plating sludge10.1016/0008-8846(92)90106-6 ↗
3. Ordinary portland cement based solidification: the role of OPC reviewed10.1016/0008-8846(93)90151-X ↗
4. A review of solidification/stabilization technology10.1016/0304-3894(87)87002-4 ↗
5. The effects of several heavy metal oxides on the formation of ettringite and the microstructure of hardened ettringite10.1016/0008-8846(79)90122-4 ↗
6. Hardening property of cement mortar adding heavy metal compound and solubility of heavy metal from hardened mortar
7. The effects of Cr2O3, Cu(OH)2, ZnO and PbO on the compressive strength and the hydrates of the hardened C3A paste10.1016/0008-8846(79)90032-2 ↗
8. Chemistry of cement—solidified waste forms
9. Supplementary cementing materials for use in blended cements
10. Influence of lead, zinc, iron (III) and chromium (III) oxides on the setting time and strength development of Portland cement10.1016/S0008-8846(01)00545-2 ↗
11. Heavy metal speciation and leaching behaviours in cement based solidified/stabilized waste materials10.1016/S0304-3894(00)00360-5 ↗
12. Influence of condensed silica fume on the properties of cement-based solidified wastes10.1016/S0008-8846(01)00541-5 ↗
13. Encapsulation of steel foundry bag house dusts in cement mortar10.1016/S0008-8846(98)00169-0 ↗
14. FTIR and XPS investigations of the effects of carbonation on the solidification/stabilization of cement based system—Portland Type V with zinc10.1016/0008-8846(93)90031-4 ↗
15. Solution chemistry during cement hydration in the presence of metal hydroxide waste10.1016/S0008-8846(97)00109-9 ↗