journal article·2002-10

Mechanical behaviour of various mortars made by combined fly ash and limestone in Moroccan Portland cement

I Elkhadiri, A Diouri, A Boukhari, J Aride, F Puertas

Cement and Concrete Research· Volume 32· Issue 10
Publisher page

Abstract

[EN]Physico-chemical properties and mechanical behaviour of ternary cements made by Portland cement, fly ash and limestone are studied. The mixtures at various compositions of clinker, gypsum fly ash and limestone are intimately ground and compared to other compositions without fly ash. Blended fly ash cements are also studied. The results show that fly ash acts as grinding agent by reducing the required time to obtain the same percentage of particles retained on a 80-μm sieve as the standard cement. Fly ash cements lead to an important extension of setting time than limestone cements. The replacement of clinker by limestone gives better mechanical strengths than the mixtures containing fly ash at early days; after 28 days, the cements prepared by incorporation of fly ash gain an important strength. From mechanical point of view, an optima dosage was obtained at 77% clinker, 2% gypsum, 7.5% fly ash and 13% limestone composition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Rock Mechanics and Modeling · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. European Standard, Cement, Composition, Superfication and conformity criteria-common cements, EN 197-1, 1995.
2. A study on the parameters affecting the properties of Portland limestone cements10.1016/S0958-9465(98)00031-6 ↗
3. Hydration kinetics and microstructural development in the 3CaO·Al2O3–CaSO4·2H2O–CaCO3–H2O system10.1007/BF02472147 ↗
4. Mechanisms of limestone reactions in the system (C3A–CaSO4·H2O–CH–CaCO3–H): Competition between calcium monocarbo- and monosulfo-aluminate hydrates formation
5. An investigation of the formation of carboaluminates
6. Influence of finely ground limestone on cement hydration10.1016/S0958-9465(98)00020-1 ↗
7. Influence of different fillers on the hydration of C3S
8. American Society for Testing and Materials, Specification of fly ash and raw or calcined natural pozzolan for use as a mineral admixture in Portland cement concrete, ASTM, Philadelphia, ASTMC618-78, 1978.
9. European standard, Methods of testing cement; pozzolanicity test for pozzolanic cements, EN196-5, May 1987.
10. Experience with fly ash cement
11. Laboratory-Produced high volume fly ash blended cements: Physical properties and compressive strength of mortars10.1016/S0008-8846(98)00132-X ↗
12. Rheology of fresh concrete: Influence of filler addition in the cements
13. A study of the hydration and strength of interground and blended Chinese cements at early ages
14. Predictions of the effect of fly ash in Portland cement mortar and concrete
15. Thermogravimetric methods for determining carbon content in fly ash10.1016/S0008-8846(98)00030-1 ↗
16. Mechanism of Portland cement hydration
17. Mechanism and kinetics of hydration of C3A and C4AF extracted from cement10.1016/0008-8846(84)90110-8 ↗
18. Fly ash in concrete—A microstructure study10.1016/0008-8846(81)90089-2 ↗
19. Properties and use of fly ash in Portland cement concrete
20. Studies on the carboaluminate formation in limestone filler-blended cements10.1016/S0008-8846(01)00491-4 ↗
21. Carboaluminate reactions as influenced by limestone addition
22. Textures et Performance des ciments fillérisés
23. Cement with calcium carbonate addition
24. Mechanical treatment of fly ashes: Part I. Physical–chemical characterization of ground fly ashes10.1016/0008-8846(95)00141-X ↗
25. Mechanical treatment of fly ashes: Part III. Studies on strength development of ground fly ashes (GFA)-cement mortars10.1016/S0008-8846(97)00129-4 ↗
26. Portland-PFA cement: a comparison between intergrinding and blending10.1680/macr.1983.35.124.131 ↗
27. Cement with interground additives: Part I. Capabilities and environmental relief