Alkali–silica reaction (ASR)—performance testing: Influence of specimen pre-treatment, exposure conditions and prism size on concrete porosity, moisture state and transport properties
Source abstract
Abstract
Abstract Whether or not concrete prism tests (CPTs) developed for assessment of alkali–silica reactivity of aggregates might be suitable for general ASR performance testing of concrete has been evaluated. This paper presents the background for the choice of test procedures and results on how variations in specimen pre-treatment, ASR exposure conditions and prism size influence concrete porosity, moisture state and transport properties. Results from measurements of alkali leaching and prism expansions during the ASR exposure are presented in a separate paper, together with discussion of consequences for ASR test procedures. For ordinary Portland cements and with water-to-cementitious-materials ratio (w/cm) 0.45 and higher it was found that the internal moisture state is sufficiently high in all the assessed procedures to produce ASR expansion. However, for less permeable concretes lack of internal moisture and lower rate of diffusion can significantly reduce the rate and extent of ASR expansion during laboratory performance testing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. The expansion of concrete through reaction between cement and aggregate
2. RILEM TC 191-ARP: ‘Alkali-reactivity and prevention—assessment, specification and diagnosis of alkali-reactivity’, RILEM Recommended Test Method AAR-1: Detection of potential alkali-reactivity of aggregates—petrographic method
3. Mater. Struct. · 2000 · 33 · 28310.1007/BF02479697 ↗
4. RILEM TC 191-ARP: ‘Alkali-reactivity and prevention—assessment, specification and diagnosis of alkali-reactivity’, AAR-5: Rapid preliminary screening test for carbonate aggregates
5. 2006
6. Mater. Struct. · 2003 · 36 · 472
7. The EU “PARTNER” Project—European standard tests to prevent alkali reactions in aggregates: final results and recommendations10.1016/j.cemconres.2009.09.004 ↗
8. 2007 · 5
9. 2008 · 7
10. ASTM C295—08 Standard Guide for Petrographic Examination of Aggregates for Concrete
11. CSA, CSA A23.2-14A-00, Potential Expansivity of Aggregates (Procedure for Length Change due to Alkali–Aggregate Reaction in Concrete Prisms at 38°C)
12. 2009
13. 2009
14. 2008
15. The effect of supplementary cementing materials on alkali–silica reaction: a review10.1016/j.cemconres.2010.11.003 ↗
16. Controlling alkali silica reaction by understanding the contribution of aluminium provided by supplementary cementitious materials
17. 2004
18. Norwegian Concrete Association: Alkali–aggregate Reactions in Concrete
19. Test methods for evaluating preventive measures for controlling expansion due to alkali–silica reaction in concrete10.1016/j.cemconres.2006.01.014 ↗
20. Experience using the Norwegian 38°C concrete prism test to evaluate the alkali reactivity of aggregates, concrete mixes and binder combinations
21. 2004 · 33
22. Lindgård · 2011 · 27 · 164
23. Alkali–silica reactions (ASR): literature review on parameters influencing laboratory performance testing10.1016/j.cemconres.2011.10.004 ↗
24. 2011
25. Alkali-silica reaction (ASR)-performance testing: influence of specimen pre-treatment, exposure conditions and prism size on alkali leaching and prism expansion10.1016/j.cemconres.2013.05.017 ↗
26. Coastal concrete bridges: moisture state, chloride permeability and aging effects
27. Alkali–silica reactions in concrete—relationship between water content and observed damage on structures
28. Coefficient of thermal expansion of cement paste and concrete: mechanisms of moisture interaction10.1617/s11527-006-9086-z ↗
29. Drying of building moisture in concrete
30. The PF-method—a simple way to estimate the w/c-ratio and air content of hardened concrete
31. Alkali-reactive and inert fillers in concrete
32. The role of water in alkali–silica reaction
33. Concrete tests for ASR assessment: effects of testing environment on preconditions for an ASR and transferability of test results
34. In situ moisture state of coastal bridges
35. Resistivity and humidity measurements of repaired and non-repaired areas in Gimsøystraumen bridge
36. Effects of water–cement ratio on expansion due to ASR
37. The moisture condition of field concrete exhibiting alkali–silica reactivity
38. Distribution of water content in self-compacted high strength concrete due to water evaporation and self-desiccation, RILEM Proceedings PR042
39. Internal curing−role of absorbed water in aggregates
40. Experimental observation of internal water curing of concrete10.1617/s11527-006-9132-x ↗
41. Modelling the leaching kinetics of cement-based materials-influence of materials and environment10.1016/S0958-9465(02)00085-9 ↗
42. Material and environmental parameter effects on the leaching of cement pastes: experiments and modelling10.1016/j.cemconres.2007.10.009 ↗
43. The alkali–silica reaction: mineralogical and geochemical aspects of some Dutch concretes and Norwegian mylonites
44. J. Lindgård, Alkali–silica reactions (ASR)—Performance testing (draft title for the PhD thesis), NTNU, Norwegian Universiy of Science and Technology Trondheim, (to be published during 2013).
45. Powers · 1948 · 22
46. Electrical Resistivity of Concrete—A Literature Review, PCA R&D Serial No. 2457
47. Prediction of Chloride Penetration in Concrete
48. 2007
49. Electrical Resistivity of Concrete, Publication no. 80
50. High strength concrete binders
51. Advantages of using plane polished section analysis as part of microstructural analyses to describe internal cracking due to alkali–silica reactions
52. Synergy between fly ash and limestone powder in ternary cements10.1016/j.cemconcomp.2010.09.006 ↗
53. The effect of temperature on the hydration of composite cements containing limestone powder and fly ash10.1617/s11527-011-9819-5 ↗
54. Water sorption properties of hardened cement paste cured or stored at elevated temperatures10.1016/0008-8846(73)90007-0 ↗
55. Modelling moisture conditions in cementitious materials—some present challenges