Moisture dependence of thermal expansion in cement-based materials at early ages
Source abstract
Abstract
Abstract The coefficient of thermal expansion (CTE) of cement-based materials is strongly dependent upon their moisture content. In particular, with a drop of internal relative humidity (RH), an increase of the CTE is observed. This effect can be attributed to the internal RH change associated with a temperature change (ΔRH/ΔT coefficient). Published data show high scatter and moreover they mostly refer to drying and do not address the effect of self-desiccation in low water-to-cement ratio (w/c) materials. In this paper, the RH dependence upon temperature is quantified using the ΔRH/ΔT coefficient for cement pastes of different w/c. Next, the ΔRH/ΔT coefficient is coupled with the observed evolution of the CTE in cement pastes and mortars. The experimental investigation focuses explicitly on the early-age period up to about 7 days from water addition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Coefficient of thermal expansion of cement paste and concrete: mechanisms of moisture interaction10.1617/s11527-006-9086-z ↗
2. Thermal dilation and internal relative humidity of hardened cement paste10.1617/s11527-006-9108-x ↗
3. Overview and future trends of shrinkage research10.1617/s11527-006-9114-z ↗
4. Delayed thermal dilatations of cement paste and concrete due to mass transport10.1016/0029-5493(70)90108-1 ↗
5. Measuring permeability of rigid materials by a beam-bending method: I, theory10.1111/j.1151-2916.2000.tb01540.x ↗
6. Radjy · 2003
7. Controlling the coefficient of thermal expansion of cementitious materials — a new application for superabsorbent polymers10.1016/j.cemconcomp.2012.08.010 ↗
8. A volumetric technique for measuring the coefficient of thermal expansion of hardening cement paste and mortar10.1016/j.cemconres.2010.03.021 ↗
9. Autogenous shrinkage in high-performance cement paste: an evaluation of basic mechanisms10.1016/S0008-8846(02)00890-6 ↗
10. Prediction of self-desiccation in low water-to-cement ratio pastes based on pore structure evolution10.1016/j.cemconres.2013.03.013 ↗
11. A constitutive model for drying of a partially saturated porous material10.1016/j.mechmat.2008.10.011 ↗
12. Modelling drying shrinkage in reconstructed porous materials: application to porous Vycor glass10.1088/0965-0393/6/3/002 ↗
13. Thermal expansion of high-performance cement paste and mortar at early age
14. Early-age thermal deformations of cement paste and mortars
15. Brunauer · 1943
16. Isosteric heat of adsorption: theory and experiment10.1021/jp9903817 ↗
17. Physical structure of hardened cement paste. A classical approach10.1007/BF02472146 ↗
18. Adsorption of gases. Vapors and liquids by microporous adsorbents10.1007/s10450-005-5636-x ↗
19. Comparison of experimental techniques for measuring isosteric heat of adsorption10.1023/A:1026551213604 ↗
20. Influence of temperature on autogenous deformation and relative humidity change in hardening cement paste10.1016/S0008-8846(99)00021-6 ↗
21. Physical bonds of water in hardened cement paste
22. Temperature dependence of the sorption isotherms of cement-based materials: heat of sorption and Clausius–Clapeyron formula10.1016/j.cemconres.2009.07.018 ↗
23. On application of an isothermal sorption microcalorimeter10.1016/S0040-6031(01)00476-2 ↗
24. Sorption hysteresis and the vapor pressure of concave surfaces10.1021/ja01269a058 ↗
25. Capillary condensation in MMS and pore structure characterization10.1016/S1387-1811(01)00251-7 ↗
26. Mercury porosimetry: an inappropriate method for the measurement of pore size distributions in cement-based materials10.1016/S0008-8846(00)00370-7 ↗
27. Modification of the Bogue calculation10.1680/adcr.1989.2.6.73 ↗
28. The Scipy community
29. Measuring techniques for autogenous strain of cement paste10.1617/s11527-006-9180-2 ↗
30. Influence of the calcium sulphate source on the hydration mechanism of Portland cement–calcium sulphoaluminate clinker–calcium sulphate binders10.1016/j.cemconcomp.2011.03.005 ↗
31. Taylor · 1990
32. The work of Powers and Brownyard revisited: Part 110.1016/j.cemconres.2004.05.031 ↗
33. Modeling hygro-thermal performance and strains of cementitious building materials maturing in variable conditions10.1177/1744259108089992 ↗
34. Poisson's ratio of concrete: a comparison of dynamic and static measurements10.1680/macr.1955.7.20.61 ↗
35. Persson · 2006
36. Nilsson · 1987
37. Sjöberg · 2007
38. Hygro-thermo-chemo-mechanical modelling of concrete at early ages and beyond. Part II: shrinkage and creep of concrete10.1002/nme.1636 ↗
39. A method based on isothermal calorimetry to quantify the influence of moisture on the hydration rate of young cement pastes10.1016/j.cemconres.2010.02.005 ↗
40. Effect of water-retaining lightweight aggregate on the reduction of thermal expansion coefficient in mortar subject to temperature histories10.1016/j.cemconcomp.2012.08.003 ↗