journal article·2021-09

Effect of clinkering conditions on phase evolution and microstructure of Belite Calcium-Sulpho-Aluminate cement clinker

D. Koumpouri, I. Karatasios, V. Psycharis, I.G. Giannakopoulos, M.S. Katsiotis, V. Kilikoglou

Publisher page

Abstract

Abstract This paper studies the effect of clinkering temperature and duration on the production, phase evolution and microstructure of low energy Belite Calcium-Sulpho-Aluminate (BCSA) clinkers. The mineralogy and microstructure of BCSA clinker, produced in the temperature range of 1270–1340 °C and clinkering duration periods of 20, 30 and 60 min, were studied by XRD/QXRD and SEM/EDS. In all clinkering conditions belite was detected in both αH′- and β-polymorphs while ye'elimite was mainly formed in the orthorhombic phase, accompanied by small amounts of cubic polymorph. Extensive formation of perovskite was also detected. It was shown that elevated concentrations of Ti and S affect belite's polymorphism; at low clinkering conditions their incorporation in the belite crystal led to the stabilization of αH′-polymorph, while at elevated temperatures their partial release from belite crystals favours the stabilization of β-polymorph. The results highlight the importance of experimental simulation in combination with theoretical clinker design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Nuclear materials and radiation effects · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. CEMBUREAU
2. Sustainable development and climate change initiatives10.1016/j.cemconres.2007.09.008 ↗
3. PBL Netherlands Environmental Assessment Agency, Trends in global CO2 emissions: 2016 report (n.d.). https://www.pbl.nl/en/publications/trends-in-global-co2-emissions-2016-report (accessed December 1, 2020).
4. Industrially interesting approaches to “low-CO2” cements10.1016/j.cemconres.2004.01.021 ↗
5. Cement and carbon emissions10.1617/s11527-013-0114-5 ↗
6. Alternative cement clinkers10.1016/j.cemconres.2017.02.002 ↗
7. Aluminum-rich belite sulfoaluminate cements: clinkering and early age hydration10.1016/j.cemconres.2009.11.003 ↗
8. Favier · 2018
9. Performance of belite-sulfoaluminate cements10.1016/S0008-8846(01)00543-9 ↗
10. Use of Fly ash, blast furnace slag, and chemical gypsum for the synthesis of calcium sulfoaluminate-based cements
11. Studies on the formation kinetics of calcium sulphoaluminate10.1016/0008-8846(94)90196-1 ↗
12. Effect of Al2O3/SiO2 ratio on ye’elimite production on CSA cement10.1016/j.conbuildmat.2018.02.153 ↗
13. Marroccoli · 2010
14. Rietveld quantitative phase analysis of yeelimite-containing cements10.1016/j.cemconres.2012.03.018 ↗
15. Advances in understanding ye’elimite-rich cements10.1016/j.cemconres.2019.105778 ↗
16. Effect of raw mix design and of clinkering process on the formation and mineralogical composition of (ternesite) belite calcium sulphoaluminate ferrite clinker10.1016/j.cemconres.2014.02.004 ↗
17. Synthesis and hydration of calcium sulfoaluminate-belite cements with varied phase compositions10.1007/s10853-010-5109-9 ↗
18. Eco-efficient cements: potential economically viable solutions for a low-CO2 cement-based materials industry10.1016/j.cemconres.2018.03.015 ↗
19. G.S. Li, E.M. Gartner, High-belite sulfoaluminate clinker: fabrication process and binder preparation, World Patent Application WO 2006/018569 A2.
20. G. Walenta, C. Comparet, V. Morin, E. Gartner, Hydraulic binder based on sulfoaluminate clinker and minerals additions, World Patent Application WO 2010/070215 A1 (2010).
21. G. Walenta, E. Gartner, V. Morin, Additives for hydraulic binder based on iron-rich belite calcium sulfoaluminate clinker, World Patent Application WO 2011/020958 A1 (2011).
22. An investigation into cement CaO–SiO2–Al2O3–Fe2O3–SO3 system
23. Calcium sulfoaluminate sodalite (Ca4Al6O 12SO4) crystal structure evaluation and bulk modulus determination10.1111/jace.12700 ↗
24. Pseudocubic crystal structure and phase transition in doped ye’elimite10.1021/cg501290q ↗
25. Muzhen · 1992 · vol. 2 · 94
26. Characterisation of iron inclusion during the formation of calcium sulfoaluminate phase10.1016/j.cemconres.2010.02.009 ↗
27. The influence of ferric oxide on the properties of 3CaO·3Al2O3·SrSO410.1016/0040-6031(93)80088-R ↗
28. Sulfoaluminate-belite cement from low-calcium fly ash and sulfur-rich and other industrial by-products10.1016/S0008-8846(99)00072-1 ↗
29. Synergistic use of industrial solid wastes to prepare belite-rich sulphoaluminate cement and its feasibility use in repairing materials10.1016/j.conbuildmat.2020.120201 ↗
30. Effect of residual CaSO4 in clinker on properties of high belite sulfoaluminate cement based on solid wastes10.3390/ma13020429 ↗
31. Solidification/stabilization of gold mine tailings using calcium sulfoaluminate-belite cement10.1016/j.jclepro.2019.118008 ↗
32. Study of eco-friendly belite-calcium sulfoaluminate cements obtained from special wastes10.3390/app10238650 ↗
33. Synthesis of low-temperature calcium sulfoaluminate-belite cements from industrial wastes and their hydration: comparative studies between lignite fly ash and bottom ash10.1016/j.cemconcomp.2017.06.013 ↗
34. Preparation of calcium sulfoaluminate-belite cement from marble sludge waste10.1016/j.conbuildmat.2016.03.103 ↗
35. CSA raw mix design: effect on clinker formation and reactivity10.1617/s11527-014-0451-z ↗
36. Sharp · 1999 · 11 · 3
37. Taylor · 1997
38. Build-up formation and corrosion of monolithic refractories in cement kiln preheaters10.1016/j.jeurceramsoc.2010.02.023 ↗
39. Scholten · 2017
40. Synthesis, crystal structure, and thermal properties of CaSO4·2H2O single crystals10.5539/ijc.v7n2p12 ↗
41. Ukrainczyk · Chem. Biochem. Eng. Q. · 2013 · 27 · 83
42. Thermodynamic data of ye’elemite (C4A3S̅) for cement clinker equilibrium calculations
43. Formation, composition and stability of ye’elimite and iron-bearing solid solutions10.1016/j.cemconres.2020.106009 ↗
44. Kinetics of calcium sulfoaluminate with 1% iron oxide by isothermal and isoconversional methods10.1680/jadcr.16.00150 ↗
45. Phase compositions and equilibria in the CaO-Al2O3-Fe2O3-SO3 system, for assemblages containing ye’elimite and ferrite Ca2(Al,Fe)O510.1016/j.cemconres.2013.08.005 ↗
46. SEM examination of clinkers containing foreign elements10.1016/j.cemconcomp.2004.02.003 ↗
47. Bhavan · 2015
48. Chemical-minerаlogical characterization of bauxites from different deposits
49. The distribution of transition elements and their influences on some properties of clinker and cement
50. Polymorphism and phase changes in the ferrite phase of cements induced by titanium substitution10.1016/0008-8846(84)90054-1 ↗
51. Modifying some properties of Portland cement clinker and Portland cement by means of TiO2
52. The impact of intrinsic anhydrite in an experimental calcium sulfoaluminate cement from a novel, carbon-minimized production process10.1617/s11527-017-1012-z ↗
53. Crystal structure of ‘calcium sulphosilicate’, Ca5(SiO4)2SO410.1071/CH9740657 ↗
54. Bhatty · 2004
55. Incorporation mechanism of titanium in Portland cement clinker and its effects on hydration properties10.1016/j.conbuildmat.2017.03.129 ↗
56. Effect of TiO2 on mineral formation and properties of alite-sulphoaluminate cement10.1179/143307509X435178 ↗
57. Effect of sulfur on the polymorphism and reactivity of dicalcium silicate of Portland clinker10.1590/S0366-69132011000100017 ↗
58. Mineralogical phase analysis of alkali and sulfate bearing belite rich laboratory clinkers
59. Dicalcium silicate doped with sulfur10.1680/adcr.11.00021 ↗
60. The production of low-energy cements
61. Effect of prolonged heating at elevated temperatures on the phase composition and textures of Portland cement clinker10.1016/S0008-8846(02)00726-3 ↗