journal article·2005-04

Mineral admixtures in mortars

Martin Cyr, Philippe Lawrence, Erick Ringot

Cement and Concrete Research· Volume 35· Issue 4
Publisher page

Abstract

This work is the second part of an overall project, the aim of which is the development of general mix design rules for concrete containing different kinds of mineral admixtures. The first part presented the separation of the different physical effects responsible for changes in cement hydration when chemically inert quartz powders are used in mortars. This second part describes the development of an empirical model, based on semiadiabatic calorimetry measurements, which leads to the quantification of the enhancement of cement hydration due to the heterogeneous nucleation effect at short hydration times. Experimental results show that not all the admixture particles participate in the heterogeneous nucleation process. Consequently, the concept of efficient surface S eff is introduced in the model. S eff is the total admixture surface S (m 2 of mineral admixture/kg of cement) weighted by a function ξ( p). The efficiency function ξ( p) depends only on the replacement rate p and is independent of time, fineness and type of mineral admixture used. It decreases from 1 to 0: Low replacement rates give an efficiency value near 1, which means that all admixture particles enhance the hydration process. An efficiency value near 0 is obtained for high replacement rates, which indicates that, from the hydration point of view, an excess of inert powder does not lead to an increase in the amount of hydrates compared with the reference mortar without mineral admixture. The empirical model, which is mainly related to the specific surface area of the admixtures, quantifies the variation of the degree of hydration induced by the use of inert mineral admixtures. One application of the model, coupled with Powers` law, is the prediction of the short-term compressive strength of mortars.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Mineral admixtures in mortars—effect of inert materials on short-term hydration10.1016/S0008-8846(03)00183-2 ↗
2. Contribution minéralogique à l'étude de l'adhérence entre les constituants hydratés des ciments et les matériaux enrobés (in French)
3. Influence of CaCO3 on the hydration of 3CaOAl2O310.1111/j.1151-2916.1965.tb11787.x ↗
4. Calcareous fillers and the compressive strength of portland cement10.1016/0008-8846(76)90099-5 ↗
5. P. Lawrence, Sur l'activité des cendres volantes et des additions minérales chimiquement inertes dans les matériaux cimentaires (in French), PhD thesis UPS Toulouse, (2000).
6. Heat of hydration in concrete10.1680/macr.1954.6.17.79 ↗
7. B. Bollotte, Corrections diverses apportées aux données expérimentales pour l'établissement des relations Résistance-Chaleur dégagée, Memo ATILH, 1993.
8. G. Escadeillas, Les ciments aux fillers calcaires: Contribution à leur optimisation par l'étude des propriétés mécaniques et physiques des bétons fillérisés (in French), PhD thesis UPS Toulouse, 1988.
9. Berry · 1986
10. Hardened mortar and concrete with fly ash
11. Hydration of pozzolanic cement
12. Studies of the hydration reactions and microstructure of cement–fly-ash pastes
13. K. Van Breugel, Simulation of hydration and formation of structure in hardening cement-based materials, PhD thesis, Delft University, 1991.
14. Sur la compacité des mortiers hydrauliques
15. Abrams · 1918
16. Determination of the compressive strength of mortars and concretes
17. Relation of mechanical properties of powder metals and their porosity and the ultimate properties of porous metal-ceramic materials
18. Compression strength of porous sintered alumina and zirconia10.1111/j.1151-2916.1953.tb12837.x ↗
19. Relation between effects of porosity on strength and Young's modulus of elasticity of polycrystalline materials10.1111/j.1151-2916.1963.tb14615.x ↗
20. Strength of porous materials10.1016/0008-8846(71)90035-4 ↗
21. Effect of fine mineral admixtures on the properties of hardened cement pastes
22. Modelling the strength of cement paste and concrete
23. Pore structure and strength development of cement composites10.1016/0008-8846(90)90058-6 ↗
24. Pore structure and strengths of hardened cement pastes
25. A simple relationship between the compressive strength and porosity of hydrated Portland cement10.1016/0008-8846(81)90119-8 ↗
26. New formulas for the prediction of the effect of porosity on concrete strength
27. Intrinsic strength and microstructure of hydrated C3S10.1016/0008-8846(76)90086-7 ↗
28. Pore structure of cement stone and its influence on the mechanical properties of concrete
29. Hardened portland cement pastes of low porosity: I. Materials and experimental methods10.1016/0008-8846(72)90073-7 ↗
30. Hardened portland cement pastes of low porosity: II. Exploratory studies dimensional changes10.1016/0008-8846(72)90074-9 ↗
31. Studies on the hydration of tricalcium silicate pastes: III. Influence of admixtures on hydration and strength development10.1016/0008-8846(73)90004-5 ↗
32. Relation between the hydration state and the compressive strength of hardened Portland cement pastes10.1016/0008-8846(89)90009-4 ↗
33. Investigations on the relationship between porosity, structure and strength of hydrated portland cement pastes. I: effect of porosity10.1016/0008-8846(85)90044-4 ↗
34. Investigations on the relationship between porosity, structure and strength of hydrated Portland cement pastes. II: effect of pore structure and of degree of hydration10.1016/0008-8846(85)90113-9 ↗
35. Pore size distribution of portland cement slurries at very early stages of hydration (influence of curing temperature and pressure)10.1016/0008-8846(84)90061-9 ↗
36. Relationship between particle size distribution and compressive strength in Portland cement10.1016/0008-8846(76)90056-9 ↗
37. Choice of curing temperature for accelerated cured concrete10.1016/0008-8846(76)90024-7 ↗
38. Calculation of strength parameter for hydrated Portland cements from hydration heats measured by differential calorimetric analysis (DCA)
39. Hydrothermal studies of type V cement–quartz mixes10.1016/0008-8846(76)90010-7 ↗
40. 29Si MAS-NMR hydration and compressive strength study in cement paste10.1016/0008-8846(89)90087-2 ↗
41. Byfors · 1980
42. A method for following the hydration reaction in Portland cement paste
43. F.W. Locher, Beton Herstellung Verwendung, 26 (7,8), (1976) 247–249, 283–285.
44. Mechanical properties of cement pastes and mortars at early ages—evolution with time and degree of hydration
45. Loi de resistance en compression simple des pates pures de ciment portland conservees dans l'eau10.1016/0008-8846(80)90024-1 ↗
46. Influence of grinding and storage conditions of clinker
47. Studies of the physical properties of hardened Portland cement paste
48. The effect of admixtures on the strength–porosity relationship of Portland cement paste10.1016/0008-8846(71)90079-2 ↗
49. Prediction of compressive strength of concrete
50. Baron · 1996 · 59
51. Studies on the hydration of tricalcium silicate pastes: II. Strength development and fracture characteristics10.1016/0008-8846(73)90089-6 ↗
52. Nucleation and pozzolanic factors in strength development of class F fly ash concrete
53. Degree of hydration and gel/space ratio of high-volume fly ash/cement systems10.1016/S0008-8846(00)00213-1 ↗
54. The physical structure and engineering properties of concrete
55. Neville · 1996