journal article·2021-09

A first-order physical model for the prediction of shear-induced particle migration and lubricating layer formation during concrete pumping

Shirin Fataei, Egor Secrieru, Viktor Mechtcherine, Nicolas Roussel

Publisher page

Abstract

Abstract For the first time, a first-order physical correlation between pumping parameters (pressure and flow rate), granular skeleton properties (particle diameter and packing properties) and LL properties (thickness and viscosity) is proposed. This correlation is derived from the analysis of the equations driving shear-induced particle migration in dense suspensions. The model predictions in terms of lubricating layer apparent viscosity are compared to experimental measurements in the case of model concretes prepared with glass beads of various diameters, conventional-vibrated concretes and self-compacting concretes. This comparison is carried out for two flow typologies, namely the Sliper, known for its ability to mimic concrete pumping, and a co-axial tribometer. In all cases, the proposed model is shown to be able to capture qualitatively the observed main features and their evolutions despite the absence of any fitting parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Grouting, Rheology, and Soil Mechanics · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. The extrusion of a model yield stress fluid imaged by MRI velocimetry10.1016/j.jnnfm.2010.01.015 ↗
2. Tests to establish concrete pumpability
3. Kaplan · 2001
4. Weber · 1963
5. Effect of lubrication layer on velocity profile of concrete in a pumping pipe10.1617/s11527-014-0458-5 ↗
6. Relationships between concrete composition and boundary layer composition to optimise concrete pumpability10.1080/19648189.2012.666910 ↗
7. Lubrication layer properties during concrete pumping10.1016/j.cemconres.2012.11.001 ↗
8. Flow induced particle migration in fresh concrete: theoretical frame, numerical simulations and experimental results on model fluids10.1016/j.cemconres.2012.01.007 ↗
9. Particle migration during concrete rheometry: how bad is it?10.1617/s11527-016-0992-4 ↗
10. Prediction of concrete pumping : part II — analytical prediction and experimental verification
11. Estimation of lubrication layer thickness and composition through reverse engineering of interface rheometry tests10.3390/ma13081799 ↗
12. Chapdelaine · 2007 · 92
13. Use of tribometer to estimate interface friction and concrete boundary layer composition during the fluid concrete pumping10.1016/j.conbuildmat.2009.12.010 ↗
14. Feys · 2009
15. Estimation of the pumping pressure from concrete composition based on the identified tribological parameters10.1155/2014/503850 ↗
16. Local determination of the constitutive law of a dense suspension of noncolloidal particles through magnetic resonance imaging10.1122/1.2188528 ↗
17. The shear-induced migration of particles in concentrated suspensions10.1017/S0022112087002155 ↗
18. A constitutive equation for concentrated suspensions that accounts for shear- induced particle migration10.1063/1.858498 ↗
19. Prediction of flow induced heterogeneities and their consequences in self compacting concrete (SCC)
20. A computational approach to estimating a lubricating layer in concrete pumping
21. Choi · 2013
22. Khatib · 2013
23. Secrieru · 2018
24. Influence of aggregate volume fraction on concrete pumping behaviour
25. Experimental insights into concrete flow-regimes subject to shear-induced particle migration (SIPM) during pumping10.3390/ma13051233 ↗
26. 2008
27. Characterization data of reference cement CEM III / A 42 . 5N used for priority program DFG SPP 2005 “ Opus Fluidum Futurum – Rheology of reactive , multiscale , multiphase construction materials ,”10.1016/j.dib.2020.105524 ↗
28. A thixotropy model for fresh fluid concretes: theory, validation and applications10.1016/j.cemconres.2006.05.025 ↗
29. Deformation and flow
30. Extension of the Reiner–Riwlin equation to determine modified Bingham parameters measured in coaxial cylinders rheometers10.1617/s11527-012-9902-6 ↗
31. Avoiding inaccurate interpretations of rheological measurements for cement-based materials10.1016/j.cemconres.2015.05.003 ↗
32. Kepler · 1611
33. Packing density and homogeneity of granular mixes
34. Kasten · 2010
35. Testing pumpability of concrete using sliding pipe rheometer10.1016/j.conbuildmat.2013.11.037 ↗
36. Design of concrete pumping circuit
37. Characterization of air dissolution and reappearance under pressure in cement pastes by means of rheology10.3389/fmats.2019.00073 ↗
38. Elkey · 1994
39. Study on concrete pumpability combining different laboratory tools and linkage to rheology10.1016/j.conbuildmat.2017.03.199 ↗
40. Rheological characterisation and prediction of pumpability of strain-hardening cement-based-composites (SHCC) at various temperatures10.1016/j.conbuildmat.2016.02.161 ↗
41. Parameters influencing pressure during pumping of self-compacting concrete10.1617/s11527-012-9912-4 ↗
42. A theoretical frame to study stability of fresh concrete10.1617/s11527-005-9036-1 ↗
43. Squeeze film between two spheres in a power-law fluid10.1016/0377-0257(95)01414-4 ↗
44. de Larrard · 1999
45. From ordinary rhelogy concrete to self compacting concrete: a transition between frictional and hydrodynamic interactions10.1016/j.cemconres.2008.03.011 ↗
46. Estimation of the co-ordination number in a multi-component mixture of spheres10.1016/0032-5910(83)87004-1 ↗
47. Application of ree-eyring generalized flow theory to suspensions of spherical particles10.1016/0095-8522(56)90023-X ↗
48. É. Guazzelli, O. Pouliquen, Rheology of dense granular suspensions, J. Fluid Mech. 852 (2018) P1-1–P1-73.10.1017/jfm.2018.548 ↗
49. Shear-induced radial segregation in bidisperse suspensions10.1017/S0022112096007768 ↗