Obtaining rheological parameters from flow test — Analytical, computational and lab test approach
Source abstract
Abstract
In the mix design process of cementitious suspensions, an adequate rheology of the cement paste is crucial. A novel rheological field test device for cementitious fluids is presented here and investigated theoretically, by computer simulation and by lab tests. A simple flow stoppage test with a timed spread passage point provides accurate rheological parameters according to the Bingham material model. Values for yield stress and plastic viscosity are obtained for a test specimen of no more than 19.75 · 10− 6 m3 of fluid. This volume is equivalent to 19.75 g of water at room temperature. Such a small volume allows reliable tests even for small amounts of fillers. Promising results show that both yield stress and plastic viscosity can be determined by this simple test. This novel rheological test method also enables the correlation of different rheological equipment used by different laboratories.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Rheology and Fluid Dynamics Studies · Drilling and Well Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Correlation between yield stress and slump: comparison between numerical simulation and concrete rheometers results10.1617/s11527-005-9035-2 ↗
2. Identifying viscosity of cement paste from mini-slump-flow test
3. On the identification of rheological properties of cement suspensions: rheometry, computational fluid dynamics modeling and field test measurements10.1016/j.cemconres.2012.05.007 ↗
4. A fifty cent rheometer for yield stress measurement10.1122/1.550780 ↗
5. A generalized approach for the determination of yield stress by slump and slump flow10.1016/j.cemconres.2003.08.005 ↗
6. Slump and slump flow for characterizing yield stress of fresh concrete
7. “Fifty-cent rheometer” for yield stress measurements: from slump to spreading flow10.1122/1.1879041 ↗
8. Relationship between the Bingham parameters and slump10.1016/j.cemconres.2006.03.001 ↗
9. Study on slump test of fresh concrete
10. Methods for evaluating rheological coefficients of self-compacting concrete by numerical analysis
11. Viscosity of lava10.1086/624778 ↗
12. Simulation of fresh concrete flow evaluating rheological parameters
13. Water–powder mixtures at the onset of flowing
14. Wallevik · 2009
15. Macosko · 1994
16. Malvern · 1969
17. Mase · 1970
18. 1996
19. Wallevik · 2003
20. The LCPC box, a cheap and simple technique for yield stress measurements of SCC10.1617/s11527-007-9230-4 ↗
21. Kreyszig · 1999
22. Analysis of L-box test for tremie pipe concrete
23. Whorlow · 1992
24. Giles · 1962
25. “Fifty-cent rheometer” for yield stress measurements: from slump to spreading flow10.1122/1.1879041 ↗
26. Flows of materials with yield10.1122/1.549926 ↗
27. 1992
28. Volume of fluid (VOF) method for the dynamics of free boundaries10.1016/0021-9991(81)90145-5 ↗
29. 2008
30. 2000
31. A tensorial approach to computational continuum mechanics using object oriented techniques10.1063/1.168744 ↗
32. Gram · 2009
33. Obtaining rheological parameters from slump flow test for self-compacting concrete