In situ pH monitoring in accelerated cement pastes
Source abstract
Abstract
The fast pH changes in ordinary Portland cement pastes (with and without C3A), caused by the addition of an Al2(SO4)3 based setting accelerator were in situ monitored by optical pH sensors. The results obtained clearly demonstrated the ability of this novel method to determine the pH with a high temporal resolution. Additionally, the distribution of the accelerator within the cement paste was assessed by fluorescence imaging with the use of a fluorescein tracer. Instantly after the addition of the accelerator and the subsequent formation of ettringite, the pH dropped from ~13 to ~10. The pH drop and recovery rate was controlled by the accelerator dosage and availability of Ca2+ and OH−. The methods presented would help to predict and assess the effects caused by chemical admixtures (e.g. setting accelerators) on the cement hydration progress.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Analytical Chemistry and Sensors · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Early hydration of SCM-blended Portland cements: a pore solution and isothermal calorimetry study10.1016/j.cemconres.2016.11.013 ↗
2. Early hydration of cementitious systems accelerated by aluminium sulphate: effect of fine limestone10.1016/j.cemconres.2020.106069 ↗
3. Analysis of aluminum concentrations in the pore solution during hydration of tricalcium silicate10.1016/j.cemconres.2017.02.020 ↗
4. Inhibition mechanisms of steel slag on the early-age hydration of cement10.1016/j.cemconres.2020.106283 ↗
5. Dissolution theory applied to the induction period in alite hydration10.1016/j.cemconres.2010.01.012 ↗
6. Modelling the effect of electrolytes on the rate of early hydration of tricalcium silicate
7. The stability of ettringite10.1680/adcr.1993.5.18.47 ↗
8. Thermodynamic modelling of the hydration of Portland cement10.1016/j.cemconres.2005.03.001 ↗
9. 2013
10. Accelerating admixtures for shotcrete10.1016/S0958-9465(98)80007-3 ↗
11. The influence of alkali-free and alkaline shotcrete accelerators within cement systems: I. Characterization of the setting behavior10.1016/S0008-8846(01)00509-9 ↗
12. Early age hydration of cement pastes with alkaline and alkali-free accelerators for sprayed concrete10.1016/j.conbuildmat.2016.02.101 ↗
13. Effects of calcium-carbonate-based aggregates on alkali-free accelerators10.1680/adcr.13.00041 ↗
14. Berodier · 2015
15. Teichmann · 2007
16. Influence of cement fineness and water-to-cement ratio on mortar early-age heat of hydration and set times10.1016/j.conbuildmat.2013.10.011 ↗
17. The needle model: a new model for the main hydration peak of alite10.1016/j.cemconres.2018.08.005 ↗
18. Xu · 2005
19. Continuous optical in-situ pH monitoring during early hydration of cementitious materials10.1016/j.cemconres.2021.106584 ↗
20. 2011
21. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
22. Evaporation — a key mechanism for the thaumasite form of sulfate attack10.1016/j.cemconres.2013.03.003 ↗
23. Chloride binding in cement II. The influence of the hydroxide concentration in the pore solution of hardened cement paste on chloride binding10.1016/0008-8846(89)90039-2 ↗
24. Near-infrared fluorescent aza-BODIPY dyes for sensing and imaging of pH from the neutral to highly alkaline range10.1039/C9AN00118B ↗
25. Fast and stable optical pH sensor materials for oceanographic applications10.1016/j.snb.2018.11.048 ↗
26. Durability of clinker reduced shotcrete: Ca2+ leaching, sintering, carbonation & chloride penetration10.1617/s11527-021-01644-7 ↗
27. Methodology for pH measurement in high alkali cementitious systems10.1016/j.cemconres.2020.106122 ↗
28. The pore solution of blended cements : a review10.1617/s11527-015-0724-1 ↗
29. The hydration of fast setting spray binder versus (aluminum sulfate) accelerated OPC10.1617/s11527-022-01907-x ↗
30. Mitigation of ASR by the use of LiNO3 - characterization of the reaction products10.1016/j.cemconres.2014.02.003 ↗