journal article·2022-11

Effect of fineness of cement on drying shrinkage

Ippei Maruyama, Hiroki Sugimoto, Syota Umeki, Ryo Kurihara

Publisher page

Abstract

The effect of fineness of cement on drying shrinkage was investigated. Three cement paste samples with different fineness values were prepared from the same clinker. The changes in length and mass, and water vapor sorption of the dried cement pastes after 3, 7, 28, and 91 d of curing were obtained. The relationships between drying shrinkage and the degree of hydration were not identical under the different cement fineness values. Therefore, there exists another mechanism behind the increase in drying shrinkage, apart from the faster degree of hydration. It was found that drying shrinkage is well predicted by the index S H2O,v × B, where B denotes the Blaine value of cement, and S H2O,v represents the water vapor sorption surface area. Hence, it was deduced that C–S–H undergoes an anisotropic volume change under drying and a greater shrinkage in the circumferential direction of the original cement grains.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (95)

Show source-provided references
1. Drying shrinkage of concrete as affected by many factors
2. Effect of aggregate on shrinkage of concrete and a hypothesis concerning shrinkage
3. Influence of aggregate properties on concrete shrinkage
4. Model study of shrinkage cracking in concrete building walls
5. Effect of aggregates on drying shrinkage microcracking in cement-based composites10.1007/BF02483132 ↗
6. A numerical and experimental study of aggregate-induced shrinkage cracking in cementitious composites10.1016/j.cemconres.2011.09.013 ↗
7. Strain and crack distribution in concrete during drying10.1617/s11527-013-0076-7 ↗
8. Numerical study on drying shrinkage of concrete affected by aggregate size10.3151/jact.12.279 ↗
9. Strength and Young’s modulus change in concrete due to long-term drying and heating up to 90 °C10.1016/j.cemconres.2014.07.016 ↗
10. Mechanism of drying-induced change in the physical properties of concrete: a mesoscale simulation study10.1016/j.cemconres.2021.106401 ↗
11. Triaxial mechanical behaviour of mortar: effects of drying10.1016/j.cemconres.2003.12.004 ↗
12. Kishitani · 1982 · 317
13. Effects of desiccation on mechanical behaviour of concrete10.1016/j.cemconcomp.2004.05.004 ↗
14. A review of some of the main results of a research on the ageing phenomena of concrete: effect of moisture conditions on strength, shrinkage and creep of mature concrete10.1016/0008-8846(74)90048-9 ↗
15. Mechanism of change in splitting tensile strength of concrete during heating or drying up to 90°C10.3151/jact.13.94 ↗
16. Effects of curing and drying enviroments on splitting tensile strength of concrete
17. Effect of curing method and final moisture condition on compressive strength of concrete
18. Naus · 2010 · 328
19. Interaction of hardened cement paste and water10.1111/j.1151-2916.1973.tb12711.x ↗
20. Effect of sorbed water on some mechanical properties of hydrated Portland cement paste and compacts
21. Experimental characterisation of the drying effect on uniaxial mechanical behaviour of mortar10.1007/BF02481616 ↗
22. Cement reaction and resultant physical properties of cement paste10.3151/jact.12.200 ↗
23. Yao · 2013
24. Multi-scale review for possible mechanisms of natural frequency change of reinforced concrete structures under an ordinary drying condition10.3151/jact.14.691 ↗
25. Impact of drying on structural performance of reinforced concrete shear walls10.3151/jact.16.210 ↗
26. Thermo-hygral analysis on long-term natural frequency of RC buildings with different dimensions10.3151/jact.15.381 ↗
27. Impact of drying on structural performance of reinforced concrete beam with slab10.3390/ma14081887 ↗
28. Shear strength of reinforced concrete beams: concrete volumetric change effects10.3151/jact.14.229 ↗
29. Effect of early age drying shrinkage on the seismic response of RC structures10.1617/s11527-020-01552-2 ↗
30. The mechanics of shrinkage and reversible creep of hardened cement paste
31. A model for hydrated Portland cement paste as deduced from sorption-length change and mechanical properties10.1007/BF02473639 ↗
32. Surface tension skrinkage and strength of hardened cement paste10.1007/BF02473643 ↗
33. Thermodynamics of hindered adsorption and its implications for hardened cement paste and concrete10.1016/0008-8846(72)90019-1 ↗
34. Creep and drying shrinkage of calcium silicate pastes III. A hypothesis of irreversible strains10.1016/0008-8846(79)90098-X ↗
35. Drying shrinkage mechanisms in Portland cement paste10.1111/j.1151-2916.1987.tb05002.x ↗
36. Role of disjoining pressure in cement based materials10.1016/j.cemconres.2005.04.004 ↗
37. Origin of drying shrinkage of hardened cement paste: hydration pressure10.3151/jact.8.187 ↗
38. Modelling the drying shrinkage of porous materials by considering both capillary and adsorption effects10.1016/j.jmps.2020.104016 ↗
39. The reversible and irreversible drying shrinkage of hardened Portland cement and tricalcium silicate paste
40. Kolloide chemische reaktionen des tonerdezementmörtels
41. A model for the microstructure of calcium silicate hydrate in cement paste10.1016/S0008-8846(99)00209-4 ↗
42. Refinements to colloid model of C-S-H in cement: CM-II10.1016/j.cemconres.2007.10.006 ↗
43. Le Châtelier’s conjecture: measurement of colloidal eigenstresses in chemically reactive materials10.1016/j.jmps.2017.12.012 ↗
44. Dynamic microstructural evolution of hardened cement paste during first drying monitored by 1H NMR relaxometry10.1016/j.cemconres.2019.04.017 ↗
45. Bimodal behavior of C-S-H interpreted from short-term length change and water vapor sorption isotherms of hardened cement paste10.1016/j.cemconres.2015.03.010 ↗
46. Surface area of cement paste conditioned at various relative humidities10.1016/0008-8846(83)90127-8 ↗
47. Effect of first drying upon the pore structure of hydrated alite paste10.1016/0008-8846(80)90028-9 ↗
48. Influence of drying on the microstructure of hardened cement paste: a mercury intrusion porosimetry, nitrogen sorption and SAXS study10.3151/jact.18.83 ↗
49. Microstructural and bulk property changes in hardened cement paste during the first drying process10.1016/j.cemconres.2014.01.007 ↗
50. Characterization of the microstructure of hydrated cement paste by small angle X-ray scattering
51. The specific surface of hardened cement paste by small-angle X-ray scattering effect of moisture content and chlorides10.1016/0008-8846(87)90062-7 ↗
52. Microstructure determination of calcium-silicate-hydrate globules by small-angle neutron scattering10.1021/jp300745g ↗
53. Structural changes to the calcium-silicate-hydrate gel phase of hydrated cement with age, drying, and resaturation10.1111/j.1551-2916.2008.02636.x ↗
54. Microstructural changes in white Portland cement paste under the first drying process evaluated by WAXS, SAXS, and USAXS10.1016/j.cemconres.2016.10.002 ↗
55. Hinderance of C-S-H sheet piling during first drying using a shrinkage reducing agent: a SAXS study10.1016/j.cemconres.2021.106429 ↗
56. The effect of drying on early-age morphology of C-S-H as observed in environmental SEM10.1016/j.cemconres.2010.08.007 ↗
57. Evolution of microstructural changes in cement paste during environmental drying10.1016/j.cemconres.2020.106093 ↗
58. Ice formation in hardened cement paste, part II - drying and resaturation on room temperature cured pastes10.1016/0008-8846(86)90006-2 ↗
59. A low-temperature DSC investigation of hardened cement paste subjected to chloride action10.1016/0008-8846(88)90009-9 ↗
60. Effects of the temperature and relative humidity on the structure of C-S-H gel10.1016/0008-8846(95)00116-T ↗
61. Gajewicz · 2014
62. Use of bench-top NMR to measure the density, composition and desorption isotherm of C-S-H in cement paste10.1016/j.micromeso.2013.01.032 ↗
63. Reply to zhou et al’.S “A discussion of the paper ‘Dynamic microstructural evaluation of hardened cement paste during first drying monitored by 1H NMR relaxometry’”10.1016/j.cemconres.2020.106219 ↗
64. Nature of C-S-H in hardened cements10.1016/S0008-8846(99)00168-4 ↗
65. The surface area of cement paste as measured by neutron scattering: evidence for two C-S-H morphologies10.1016/S0008-8846(98)00049-0 ↗
66. A model for two types of calcium silicate hydrate in the microstructure of Portland cement pastes10.1016/S0008-8846(00)00257-X ↗
67. A method for following the hydration reaction in Portland cement paste
68. Composition and morphology of hydrated tricalcium silicate10.1111/j.1151-2916.1976.tb10965.x ↗
69. Analysis of phases in cement paste using backscattered electron images, methanol adsorption and thermogravimetric analysis10.1557/PROC-85-67 ↗
70. Densification of C−S−H measured by 1H NMR relaxometry
71. Shrinkage and creep of concrete as affected by the fineness of Portland cement10.1680/macr.1970.22.71.69 ↗
72. Early-age properties of cement-based materials. I: influence of cement fineness10.1061/(ASCE)0899-1561(2008)20:7(502) ↗
73. Impact of an SRA (hexylene glycol) on irreversible drying shrinkage and pore solution properties of cement pastes10.1016/j.cemconres.2020.106227 ↗
74. Effects of heating and drying on the strength and stiffness of high-early-strength Portland cement pastes10.1016/j.cemconcomp.2019.103455 ↗
75. Adsorption of gases in multimolecular layers10.1021/ja01269a023 ↗
76. Pore structures and surface areas of hardened Portland cement pastes by nitrogen adsorption10.1139/v64-060 ↗
77. The BET-specific surface area of hydrated Portland cement and related materials10.1016/S0008-8846(03)00225-4 ↗
78. The stoichiometry of the hydration of β-dicalcium silicate and tricalcium silicate at room temperature10.1021/ja01537a001 ↗
79. Densification of C-S–H measured by 1H NMR relaxometry10.1021/jp3102964 ↗
80. Nitrogen sorption measurements and surface areas of hardened cement paste
81. Some factors affecting the surface area of hydrated Portland cement as determined by water-vapor and nitrogen adsorption
82. Some effects of aging on the surface area of Portland cement paste10.6028/jres.064A.016 ↗
83. Impact of demolding age and mineral composition of cement on drying shrinkage of cement paste
84. Relationship between degree of drying and drying shrinkage strain of hardened cement paste (in Japanese)
85. 209 committee., ACI 209R–92 prediction of creep, shrinkage, and temperature effects in concrete structures
86. Two-dimensional correlation relaxometry studies of cement pastes performed using a new one-sided NMR magnet10.1016/j.cemconres.2006.01.013 ↗
87. Observation of exchange of micropore water in cement pastes by two-dimensional T2–T2 nuclear magnetic resonance relaxometry nuclear magnetic resonance relaxometry10.1103/PhysRevE.74.061404 ↗
88. Cavitation of water in hardened cement paste under short-term desorption measurements10.1617/s11527-018-1285-x ↗
89. The surface energy of tobermorite10.1139/v59-097 ↗
90. The new model of hardened Portland cement paste
91. Tobermorite/jennite- and tobermorite/calcium hydroxide-based models for the structure of C-S-H: applicability to hardened pastes of tricalcium silicate, β-dicalcium silicate, Portland cement, and blends of Portland cement with blast-furnace slag, metakaol10.1016/j.cemconres.2004.05.034 ↗
92. Larrard · 1992
93. Influence of key parameters on drying shrinkage of cementitious materials10.1016/S0008-8846(99)00156-8 ↗
94. Influence of paste volume on shrinkage cracking and fracture properties of self-compacting concrete10.1016/j.cemconcomp.2007.03.010 ↗
95. Influences of water by cement ratio on mechanical properties of mortars submitted to drying10.1016/j.cemconres.2005.12.015 ↗