journal article·2022-11

Immobilization mechanism of radioactive borate waste in phosphate-based geopolymer waste forms

Byoungkwan Kim, Jaehyuk Kang, Younglim Shin, Tae-min Yeo, Wooyong Um

Publisher page

Abstract

The solidification of radioactive borate waste (BW), which contains a high concentration of boron ions using cement waste forms is challenging because soluble borate hinders the cement hydration reaction. Here, BW was immobilized using a phosphate-based geopolymer , and the phase change of BW in the geopolymer was investigated. The geopolymers could solidify BW up to 50 wt% depending on the water content and heat curing conditions. In geopolymers cured at high temperatures (60 and 90 °C), the 7-day compressive strength increased as the BW waste loading increased up to 40 wt%. Heat curing promoted geopolymerization and the precipitation of amorphous boron phosphate, leading to an increase in the compressive strength. The formation of a new amorphous boron phosphate phase was confirmed by performing XRD, MAS NMR, and SEM analyses of the geopolymers and reaction products. These results can improve our understanding of the immobilization mechanism of BW in phosphate-based geopolymers.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Nuclear materials and radiation effects

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. A study on the solidification of borate waste using cement
2. Study on pre-treatment method for vitrification of concentrated wastes
3. Physical barrier effect of geopolymeric waste form on diffusivity of cesium and strontium10.1016/j.jhazmat.2016.07.003 ↗
4. Development of metakaolin-based geopolymer for solidification of sulfate-rich HyBRID sludge waste10.1016/j.jnucmat.2019.03.008 ↗
5. Molecular modelling of the mechanism of action of phosphonate retarders on hydrating cements10.1039/ft9969200831 ↗
6. Alkali-activated cementitous materials: alternative matrices for the immobilisation of hazardous wastes - part I.Stabilisation of boron10.1016/S0008-8846(02)00963-8 ↗
7. Roux · 1989
8. Correlation of the form of borates separating from solutions with the pH
9. Development of geopolymer waste form for immobilization of radioactive borate waste10.1016/j.jhazmat.2021.126402 ↗
10. Vitrification of liquid waste from nuclear power plants10.1016/S0022-3115(01)00598-0 ↗
11. Solidify properties of radiactive waste using paraffin wax
12. A feasibility study on polymer solidification of evaporator concentrated wastes
13. Davidovits · 2005
14. Provis · 2009
15. Impact of activator type on the immobilisation of lead in fly ash-based geopolymer10.1016/j.jhazmat.2015.11.023 ↗
16. Sewage sludge ash contaminated with radiocesium: solidification with alkaline-reacted metakaolinite (geopolymer) and Portland cement10.1016/j.jhazmat.2021.125965 ↗
17. Rahman · 2014
18. Development of geopolymers for nuclear waste immobilisation
19. Comparative study between geopolymer and cement waste forms for solidification of corrosive sludge10.7733/jnfcwt.2020.18.4.465 ↗
20. Setting controlling of lithium slag-based geopolymer by activator and sodium tetraborate as a retarder and its effects on mortar properties10.1016/j.cemconcomp.2020.103598 ↗
21. 29Si, 27Al, 31P and 11B magic angle spinning nuclear magnetic resonance study of the structural evolutions induced by the use of phosphor- and boron–based additives in geopolymer mixtures10.1016/j.jnoncrysol.2019.119541 ↗
22. The application of sodium hydroxide and anhydrous borax as composite activator of class F fly ash for extending setting time10.1016/j.fuel.2017.06.049 ↗
23. Alkali activated materials vs geopolymers: role of boron as an eco-friendly replacement10.1016/j.conbuildmat.2017.04.137 ↗
24. Fly ash-based boroaluminosilicate geopolymer: experimental and molecular simulations10.1016/j.ceramint.2016.12.020 ↗
25. Silico-aluminophosphate and alkali-aluminosilicate geopolymers: a comparative review10.3389/fmats.2019.00106 ↗
26. Phosphate-based geopolymers: a critical review
27. Setting behavior and phase evolution on heat treatment of metakaolin-based geopolymers containing calcium hydroxide10.3390/ma15010194 ↗
28. Beneficial use of MIBC in metakaolin-based geopolymers to improve flowability and compressive strength10.3390/ma13173663 ↗
29. Complexation of nickel ions by boric acid or (poly)borates10.1007/s10953-016-0555-x ↗
30. Control of the setting reaction and strength development of slag-blended volcanic ash-based phosphate geopolymer with the addition of boric acid10.1007/s41779-021-00610-4 ↗
31. Investigation of magnesium phosphate cement hydration in diluted suspension and its retardation by boric acid10.1016/j.cemconres.2016.04.010 ↗
32. Effect of boric acid content on the properties of magnesium phosphate cement10.1016/j.conbuildmat.2019.04.113 ↗
33. Boron phosphate: its synthesis, gradual crystallisation and characterisation of bulk properties
34. Effect of curing temperature on the synthesis, structure and mechanical properties of phosphate-based geopolymers10.1016/j.jnoncrysol.2019.01.032 ↗
35. Properties and reaction mechanism of phosphoric acid activated metakaolin geopolymer at varied curing temperatures10.1016/j.cemconres.2021.106425 ↗
36. Investigation of phosphate based geopolymers formation mechanism10.1016/j.jnoncrysol.2021.120777 ↗
37. Structure and its effect on viscosity of fluorine-free mold flux: substituting CaF2 with B2O3 and Na2O10.1016/j.jnoncrysol.2019.119756 ↗
38. Geopolymers - inorganic polymeric new materials10.1007/BF01912193 ↗
39. Review on characteristics of metakaolin-based geopolymer and fast setting10.1007/s43207-020-00043-y ↗
40. Structural evidence of mixed alkali effect for aluminoborosilicate glasses
41. Stability of the Al-O-Si-O-Al linkage in a zeolitic framework10.1021/j100073a028 ↗
42. Relative strengths of phosphoric acid-reacted and alkali-reacted metakaolin materials10.1007/s10853-008-2913-6 ↗
43. Short- and medium-range order in sodium aluminophosphate glasses: new insights from high-resolution dipolar solid-state NMR spectroscopy10.1021/jp060501s ↗
44. Acid-based geopolymers: understanding of the structural evolutions during consolidation and after thermal treatments10.1016/j.jnoncrysol.2019.02.025 ↗
45. Relation between working properties and structural properties from 27Al, 29Si and 31P NMR and XRD of acid-based geopolymers from 25 to 1000° C10.1016/j.matchemphys.2019.02.049 ↗
46. Thermal stability and dehydroxylation of Brønsted acid sites in silicoaluminophosphates H-SAPO-11, H-SAPO-18, H-SAPO-31, and H-SAPO-34 investigated by multi-nuclear solid-state NMR spectroscopy10.1016/S1387-1811(02)00491-2 ↗
47. Kinetic fragility and structure of lithium borophosphate glasses analysed by 1D/2D NMR10.1039/C7CP04171C ↗