Chemo-poro-elastoplastic modelling of an oilwell cement paste: Macroscopic shrinkage and stress-strain behaviour
Source abstract
Abstract
Abstract Analysing the response of cement sheath in oil, gas or geothermal wells submitted to mechanical loadings needs an appropriate constitutive law for the cement paste in wells conditions. The knowledge of the actual initial state of stress is a key point which requires a simulation of cement paste behaviour from placement to hardened state. A chemo-poro-elastoplastic model for macroscopic shrinkage and stress-strain behaviour of cement paste at the early age is developed in this paper. A modified Cam-Clay type yield surface and an associate plastic flow rule are used. The hydration is considered as a hardening mechanism of the yield surface, which also evolves with the development of plastic strains. The model shows a good capacity in capturing the basic mechanisms of both macroscopic shrinkage and stress-strain behaviour of an oilwell class G cement paste hydrated under various conditions of temperature and pressure. A strong coupling is found between the macroscopic shrinkage and the stress-strain response.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Drilling and Well Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Cement shrinkage and elasticity: a new approach for a good
2. Chemical shrinkage of oil well cement slurries10.1680/adcr.1995.7.26.85 ↗
3. Shrinkage of oil well cement slurries
4. Autogenous deformation and RH-change in perspective10.1016/S0008-8846(01)00501-4 ↗
5. Mitigation strategies for autogenous shrinkage cracking10.1016/S0958-9465(03)00045-3 ↗
6. Autogenous shrinkage of concrete: a balance between autogenous swelling and self-desiccation10.1016/j.cemconres.2004.05.050 ↗
7. Jaouadi · 2008 · 209
8. Taylor · 1990
9. API · 1997 · 58
10. Cement mechanical-property measurements under wellbore conditions
11. Cement-shrinkage measurement in Oilwell cementing--a comparative study of laboratory methods and procedures
12. An apparatus for dissecting volumetric changes in hydrating cement paste10.1061/9780784413111.037 ↗
13. Experimental investigation of the early-age mechanical behaviour of oil-well cement paste10.1016/j.cemconres.2019.01.001 ↗
14. The effect of undrained heating on a fluid-saturated hardened cement paste10.1016/j.cemconres.2008.09.004 ↗
15. Association of macroscopic laboratory testing and micromechanics modelling for the evaluation of the poroelastic parameters of a hardened cement paste10.1016/j.cemconres.2010.03.016 ↗
16. Effect of the curing temperature on the creep of hardened cement paste10.1016/j.cemconres.2012.05.015 ↗
17. Micromechanic analysis of thermal expansion and thermal pressurization of a hardened cement paste10.1016/j.cemconres.2011.01.023 ↗
18. Poromechanical behaviour of hardened cement paste under isotropic loading10.1016/j.cemconres.2008.06.007 ↗
19. Effect of the variations of clinker composition on the poroelastic properties of harderned class G cement paste10.1016/j.cemconres.2011.03.022 ↗
20. Time-dependent behaviour of hardened cement paste under isotropic loading10.1016/j.cemconres.2012.03.002 ↗
21. Effect of loading history on mechanical properties of hardened oilwell cement
22. Onset of creation of residual strain during the hydration of oil-well cement paste10.1016/j.cemconres.2018.10.022 ↗
23. Effect of the hydration temperature on the pore structure of cement paste: experimental investigation and micromechanical modelling10.1016/j.cemconres.2018.06.014 ↗
24. Bahafid · 2017
25. Thiercelin · 1998
26. The elastic coefficients of the theory of consolidation10.1115/1.4011606 ↗
27. Zimmerman · 1991
28. Vardoulakis · 1995
29. Coussy · 2004
30. Some basic stress diffusion solutions for fluid-saturated elastic porous medias with compressible constituents10.1029/RG014i002p00227 ↗
31. Material coefficients of multiphase thermoporoelasticity for anisotropic micro-heterogenous porous media10.1016/j.ijsolstr.2012.07.011 ↗
32. Quantitative study on experimentally observed poroelastic behavior of Berea sandstone in two-phase fluid system10.1002/2013JB010937 ↗
33. The principle of effective stress
34. Thermodynamically consistent anisotropic constitutive relations for a poroelastic material saturated by two immiscible fluids10.1016/j.ijrmms.2011.02.010 ↗
35. Poroelasticity of a micro-heterogenous material saturated by two immiscible fluids10.1016/j.ijrmms.2011.10.003 ↗
36. Effet de la température d’hydratation sur la microstructure et le comportement hydromécanique d’une pâte de ciment durcie
37. Agofack · 2015
38. Druta · 2003 · 125
39. Influence of porosity on compressive and tensile strength of cement mortar10.1016/j.conbuildmat.2012.11.072 ↗
40. A multiscale micromechanics-hydration model for the early-age elastic properties of cement-based materials10.1016/S0008-8846(03)00039-5 ↗
41. Is concrete a poromechanics material? - a multiscale investigation of poroelastic properties
42. Modelling elasticity of a hydrating cement paste10.1016/j.cemconres.2007.07.003 ↗
43. A multiscale micromechanics model for the autogenous-shrinkage deformation of early-age cement-based materials10.1016/j.engfracmech.2006.01.034 ↗
44. Zaoui · 2000
45. Continuum micromechanics: suvey
46. Micromechanics of saturated and unsaturated porous media10.1002/nag.227 ↗
47. Micromechanical approach to the behavior of poroelastic materials10.1016/S0022-5096(02)00008-X ↗
48. Dormieux · 2006
49. A composite sphere assemblage model for porous oolitic rocks10.1016/j.ijrmms.2011.05.003 ↗
50. Vu · 2012 · 240
51. Micromechanical and homogenization modelling for a hydrating oilwell cement paste