Water sorption isotherms and hysteresis of cement paste at moderately high temperature, up to 80 °C
Source abstract
Abstract
The constitutive models of concrete often consider water desorption isotherms to be near-equilibrium and significantly affected by moderately high temperature, 40–80°C, typically through microstructural changes. However literature data suggest that adsorption, not desorption, is near-equilibrium and moderate temperatures do not cause microstructural changes. This work supports the latter theory, through dynamic vapor sorption experiments on cement paste at 20–80°C. Samples were pre-conditioned at 60% relative humidity and 20°C, and isotherms were measured for several humidity ranges and testing rates. The results, corroborated by classical DFT simulations, indicate that adsorption is near-equilibrium and mostly unaffected by temperature, whereas desorption is out-of-equilibrium due to the ink-bottle effect at high humidity, and interlayer water at low humidity. Starting from the second cycle, desorption at higher temperatures features a shift of the cavitation pressure and overall a smaller hysteresis. A conceptual model of pore-specific temperature-dependent hysteresis is proposed to qualitatively explain the results.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. The ONIX model: a parameter-free multiscale framework for the prediction of self-desiccation in concrete10.1016/j.cemconcomp.2019.04.011 ↗
2. Modelling of transport processes in concrete exposed to elevated temperatures–An alternative formulation for sorption isotherms10.1016/j.cemconres.2018.01.012 ↗
3. Hygro-thermo-chemo-mechanical modelling of concrete at early ages and beyond. Part II: shrinkage and creep of concrete10.1002/nme.1636 ↗
4. Century-long expansion of hydrating cement counteracting concrete shrinkage due to humidity drop from selfdesiccation or external drying10.1617/s11527-018-1307-8 ↗
5. Hysteresis from multiscale porosity: modeling water sorption and shrinkage in cement paste
6. Toward a better comprehension and modeling of hysteresis cycles in the water sorption–desorption process for cement based materials10.1016/j.cemconres.2011.03.012 ↗
7. C–S–H gel densification: The impact of the nanoscale on self-desiccation and sorption isotherms10.1016/j.cemconres.2018.04.014 ↗
8. Temperature dependence of the sorption isotherms of cement-based materials: Heat of sorption and Clausius–Clapeyron formula10.1016/j.cemconres.2009.07.018 ↗
9. A model for hydrated portland cement paste as deduced from sorption-length change and mechanical properties10.1007/BF02473639 ↗
10. Microstructural and bulk property changes in hardened cement paste during the first drying process10.1016/j.cemconres.2014.01.007 ↗
11. A 1H NMR relaxometry investigation of gel-pore drying shrinkage in cement pastes10.1016/j.cemconres.2016.04.013 ↗
12. Enhanced modeling of moisture equilibrium and transport in cementitious materials under arbitrary temperature and relative humidity history10.1016/j.cemconres.2006.11.015 ↗
13. Effect of temperature on the water retention properties of two high performance concretes10.1016/j.cemconres.2011.11.005 ↗
14. Temperature influence on water transport in hardened cement pastes10.1016/j.cemconres.2015.05.002 ↗
15. Water sorption isotherms and thermodynamic characteristics of hardened cement paste and mortar10.1007/s11242-016-0694-y ↗
16. Sorptionsuntersuchungen an zemestein, zementmörtel und beton (in German)
17. Experimental investigation of the effect of temperature on the first desorption isotherm of concrete10.1016/j.cemconres.2009.06.019 ↗
18. Pore pressure and drying of concrete at high temperature10.1061/JMCEA3.0002404 ↗
19. Pore pressure in heated concrete walls: theoretical prediction10.1680/macr.1979.31.107.67 ↗
20. Pesavento · 2000
21. Describing the influence of temperature on water retention using van genuchten equation10.1016/j.cemconres.2016.03.001 ↗
22. Fire analysis of steel–concrete composite beam with interlayer slip10.1016/j.compstruc.2010.09.004 ↗
23. Heat and mass transfer in concrete at elevated temperature10.1080/10407780600829712 ↗
24. Modeling concrete exposed to high temperature: Impact of dehydration and retention curves on moisture migration10.1002/nag.2802 ↗
25. A fully generalised, coupled, multi-phase, hygro-thermo-mechanical model for concrete10.1617/s11527-010-9591-y ↗
26. Transport properties of concrete after drying-wetting regimes to elucidate the effects of moisture content, hysteresis and microcracking10.1016/j.cemconres.2017.04.006 ↗
27. Effect of autogenous shrinkage on microcracking and mass transport properties of concrete containing supplementary cementitious materials10.1016/j.cemconres.2021.106611 ↗
28. Condensation and isothermal water transfer in cement mortar part I—Pore size distribution, equilibrium water condensation and imbibition10.1007/BF00959103 ↗
29. Capillary stress and structural relaxation in moist granular materials10.1021/acs.langmuir.8b03400 ↗
30. A polydispersed particle system representation of the porosity for non-saturated cementitious materials10.1016/j.cemconres.2006.07.001 ↗
31. Water redistribution within the microstructure of cementitious materials due to temperature changes studied with 1H NMR10.1021/acs.jpcc.7b08141 ↗
32. A study of the water vapor sorption isotherms of hardened cement pastes: Possible pore structure changes at low relative humidity and the impact of temperature on isotherms10.1016/j.cemconres.2013.11.008 ↗
33. Solutions for maintaining constant relative humidity10.1021/ie50477a042 ↗
34. Humidity fixed points of binary saturated aqueous solutions10.6028/jres.081A.011 ↗
35. Humidity control in the laboratory using salt solutions—a review10.1002/jctb.5010170901 ↗
36. Why alite stops hydrating below 80% relative humidity10.1016/j.cemconres.2011.06.001 ↗
37. Water vapour sorption experiments on hardened cementitious materials: part I: essential tool for analysis of hygral behaviour and its relation to pore structure10.1016/j.cemconres.2006.11.019 ↗
38. Determination of the percolation properties and pore connectivity for mesoporous solids using NMR cryodiffusometry10.1016/j.ces.2007.12.022 ↗
39. Comparative analysis of the dynamic vapor sorption (DVS) technique and the traditional method for sorption isotherms determination—Exemplified at autoclaved aerated concrete samples of four density classes10.1016/j.cemconres.2016.11.001 ↗
40. Influence of sample preparation and the addition of BFS on water vapour sorption isotherms
41. Thermodynamics of water confined in porous calcium-silicate-hydrates10.1021/la301738p ↗
42. Effects of elevated temperature on the structure and properties of calcium–silicate–hydrate gels: the role of confined water10.1039/c3sm50975c ↗
43. Use of bench-top NMR to measure the density, composition and desorption isotherm of c—S—H in cement paste10.1016/j.micromeso.2013.01.032 ↗
44. Nanostructure and nanomechanics of cement: Polydisperse colloidal packing10.1103/PhysRevLett.109.155503 ↗
45. Modelling cement at fundamental scales: From atoms to engineering strength and durability
46. Capillary condensation in disordered porous materials: Hysteresis versus equilibrium behavior10.1103/PhysRevLett.87.055701 ↗
47. Adsorption hysteresis and capillary condensation in disordered porous solids: a density functional study
48. Multiscale poromechanics of wet cement paste10.1073/pnas.1901160116 ↗
49. Inferring pore connectivity from sorption hysteresis in multiscale porous media10.1016/j.jcis.2018.07.095 ↗
50. Cavitation of water in hardened cement paste under short-term desorption measurements10.1617/s11527-018-1285-x ↗