Investigation of a shotcrete accelerator for targeted control of material properties for 3D concrete printing injection method
Source abstract
Abstract
The efficiency of 3D concrete printing significantly depends on the mortar performance, which can be improved and controlled by adding a shotcrete accelerator. This targeted control is implemented by adding a small accelerator dose to an injection nozzle before extrusion. In this article, a study is conducted on the suitability of the material for this application. For this purpose, a shotcrete accelerated printable mortar is investigated. Comparing physical and physicochemical results leads to an in-depth understanding of the chemical processes and their effects on physical behaviour, which enables a positive assessment of the accelerator for 3D concrete printing injection method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Additive Manufacturing and 3D Printing Technologies · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (94)
Show source-provided references
1. A chemical process engineering look at digital concrete processes: critical step design, inline mixing, and scaleup10.1016/j.cemconres.2022.106782 ↗
2. Sika Group, 3d concrete printing, 2k. https://www.sika.com/en/knowledge-hub/3d-concrete-printing.html#2k (accessed August 24, 2022).
3. Baumit, BauMinator, https://baumit.at/bauminator (accessed August 24, 2022).
4. Industrialising concrete 3D printing: Three case studies
5. Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders10.1016/j.matdes.2016.03.097 ↗
6. Using limestone powder as a carrier for the accelerator in extrusion-based 3D concrete printing
7. J.T. Kolawole, D. De-Becker, J. Xu, J. Dobrzanski, S. Cavalaro, S. Austin, N. Roussel, R. Buswell, Selected test methods for assessing fresh and plastic-state 3D concrete printing materials, In: Buswell, R., Blanco, A., Cavalaro, S., Kinnell, P. (eds) Third RILEM International Conference on Concrete and Digital Fabrication. DC 2022. RILEM Bookseries, vol 37. Springer, Cham. 460–466.10.1007/978-3-031-06116-5_68 ↗
8. Adaptive foam concrete in digital fabrication
9. T. Ooms, G. Vantyghem, Y. Tao, M. Bekaert, G.d. Schutter, K. van Tittelboom, W. de Corte, The production of a topology-optimized 3D-printed concrete bridge, In: Buswell, R., Blanco, A., Cavalaro, S., Kinnell, P. (eds) Third RILEM International Conference on Concrete and Digital Fabrication. DC 2022. RILEM Bookseries, vol vol. 37. Springer, Cham. (2022) 37–42.10.1007/978-3-031-06116-5_6 ↗
10. Sustainable 3D concrete printing with large aggregates
11. L. Reiter, A. Anton, T. Wangler, Dillenburger, J. Flatt, A 3D Printing Platform for Reinforced Printed-Sprayed Concrete Composites, In: Buswell, R., Blanco, A., Cavalaro, S., Kinnell, P. (eds) Third RILEM International Conference on Concrete and Digital Fabrication. DC 2022. RILEM Bookseries, vol 37. Springer, Cham. 37 249–254.10.1007/978-3-031-06116-5_37 ↗
12. Influence of material and process parameters on hardened state properties of shotcrete 3D-printed elements
13. Experience in online modification of rheology and strength acquisition of 3D printable mortars10.1007/978-3-319-99519-9_3 ↗
14. Study on the influence of accelerators on the hydration of Portland cement and their applicability in 3D printing, DC 202010.1007/978-3-030-22566-7_44 ↗
15. A. Szabo, L. Reiter, E. Lloret-Fritschi, F. Gramazio, M. Kohler, R.J. Flatt, Mastering Yield Stress Evolution and Formwork Friction for Smart Dynamic Casting, Materials (Basel, Switzerland) vol. 13 (2020).10.3390/ma13092084 ↗
16. Investigation on the effect of alkali-free aluminium sulfate based accelerator on the fresh properties of 3D printable concrete10.1016/j.cemconcomp.2022.104521 ↗
17. Hydration and rheology control of concrete for digital fabrication: potential admixtures and cement chemistry10.1016/j.cemconres.2018.05.014 ↗
18. N.d. Belie, C.U. Grosse, J. Kurz, H.-W. Reinhardt, Ultrasound monitoring of the influence of different accelerating admixtures and cement types for shotcrete on setting and hardening behaviour, Cem. Concr. Res. 35 (2005) 2087–2094.10.1016/j.cemconres.2005.03.011 ↗
19. Analyzing the early structural build-up of accelerated cement pastes10.1617/s11527-021-01662-5 ↗
20. I. Dressler, N. Freund, D. Lowke, The Effect of Accelerator Dosage on Fresh Concrete Properties and on Interlayer Strength in Shotcrete 3D Printing, Materials (Basel, Switzerland) vol. 13 (2020).10.3390/ma13020374 ↗
21. Acceleration of cement hydration – a review of the working mechanisms, effects on setting time, and compressive strength development of accelerating admixtures10.1016/j.conbuildmat.2022.126554 ↗
22. Accelerators for shotcrete – chemical composition and their effects on hydration, microstructure and properties of cement-based materials10.1016/j.conbuildmat.2021.122557 ↗
23. Verian · 2018
24. Extrusion-based additive manufacturing with cement-based materials – production steps, processes, and their underlying physics: a review
25. Set-on demand concrete by activating encapsulated accelerator for 3D printing
26. D. Lootens, B. Lindlar, R.J. Flatt, Some peculiar aspects of shotcrete accelerators, In: W. Sun, K. van Breugel, C. Miao, G. Ye and H. Chen, International Conference on Microstructure Related Durability of Cementitious Composites 2008 1255–1261.
27. Influence of shotcrete accelerators on the hydration of cement pastes and their impact on sulfate resistance10.1016/j.conbuildmat.2020.120782 ↗
28. Taylor · 1997
29. Relating Ettringite formation and rheological changes during the initial cement hydration: a comparative study applying XRD analysis
30. Comparing phase development and rheological properties of OPC paste within the first hour of hydration
31. Investigation of the incompatibilities of cement and superplasticizers and their influence on the rheological behavior10.3390/ma13040977 ↗
32. Controlling ettringite precipitation and rheological behavior in ordinary Portland cement paste by hydration control agent, temperature and mixing
33. U. Pott, C. Crasselt, N. Fobbe, M. Haist, M. Heinemann, S. Hellmann, D. Ivanov, C. Jakob, D. Jansen, L. Lei, R. Li, J. Link, D. Lowke, V. Mechtcherine, J. Neubauer, D. Nicia, J. Plank, S. Reißig, T. Schäfer, C. Schilde, W. Schmidt, C. Schröfl, T. Sowoidnich, B. Strybny, N. Ukrainczyk, J. Wolf, P. Xiao, D. Stephan, Characterization data of reference materials used for phase II of the priority program DFG SPP 3 2005 “Opus Fluidum Futurum – Rheology of reactive, multiscale, multiphase construction materials”, (submitted).
34. Master Builders Solution, MasterRoc SA 160. https://www.master-builders-solutions.com/de-ch/produkte/masterroc/sprayed-concrete/masterroc-sa-160 (accessed August 24, 2022).
35. Penetration test as a fast method to determine yield stress and structural build-up for 3D printing of cementitious materials10.1016/j.cemconcomp.2021.104066 ↗
36. U. Pott, C. Ehm, C. Jakob, D. Stephan, Investigation of the early cement hydration with a new penetration test, rheometry and in-situ XRD, In: Mechtcherine, V., Khayat, K., Secrieru, E. (eds) Rheology and Processing of Construction Materials. RheoCon SCC 2019 2019. RILEM Bookseries, vol vol. 23. Springer, Cham. (2020).10.1007/978-3-030-22566-7_29 ↗
37. U. Pott, Wolf. C., Y. Petryna, D. Stephan, Evaluation of the unconfined uniaxial compression test to study the evolution of apparent printable mortar properties during the early age transition regime, Cem Concr Res (2022).10.1016/j.cemconres.2022.106956 ↗
38. EN 196–1: 2016, Methods of testing cement - Part 1: Determination of strength.
39. Study of hydration potential and kinetics of the ferrite phase in iron-rich CAC10.1016/j.cemconres.2016.01.004 ↗
40. Operational issues in isothermal calorimetry10.1016/j.cemconres.2010.03.017 ↗
41. A remastered external standard method applied to the quantification of early OPC hydration10.1016/j.cemconres.2011.03.004 ↗
42. Quantitative analysis of C–S–H in hydrating alite pastes by in-situ XRD10.1016/j.cemconres.2013.06.001 ↗
43. The early hydration of OPC investigated by in-situ XRD, heat flow calorimetry, pore water analysis and 1H NMR: learning about adsorbed ions from a complete mass balance approach10.1016/j.cemconres.2018.04.017 ↗
44. Description of input and examples for PHREEQC version 3—a computer program for speciation, batch-reaction, one-dimensional transport, and inverse geochemical calculations, U.S
45. Cemdata18: a chemical thermodynamic database for hydrated Portland cements and alkali-activated materials10.1016/j.cemconres.2018.04.018 ↗
46. Aitcin · 2015
47. Gartner · 2001
48. Effects of setting regulators on the efficiency of an inorganic acid based alkali-free accelerator reacting with a Portland cement10.1016/j.cemconres.2007.01.002 ↗
49. Study of aluminum sulfate and anhydrite on cement hydration process10.1617/s11527-015-0561-2 ↗
50. Mechanisms and parameters controlling the tricalcium aluminate reactivity in the presence of gypsum10.1016/j.cemconres.2007.06.001 ↗
51. Hydration of C3A–gypsum systems10.1016/j.cemconres.2012.04.005 ↗
52. The influence of CaSO4.2H2O upon the hydration character of 3CaO.Al2O310.1680/macr.1966.18.57.185 ↗
53. E. John, The effect of artificial calcium silicate hydrate on cement hydration: Technische Universität Berlin. Doctoral Thesis, Berlin.
54. The early hydration of Ordinary Portland Cement (OPC): an approach comparing measured heat flow with calculated heat flow from QXRD10.1016/j.cemconres.2011.09.001 ↗
55. Experimental investigation of calcium silicate hydrate (C-S-H) nucleation10.1016/S0022-0248(99)00051-2 ↗
56. Study of C-S-H growth on C3S surface during its early hydration10.1007/BF02482139 ↗
57. Hydration products of C3A, C3S and Portland cement in the presence of CaCO310.1016/S0008-8846(00)00292-1 ↗
58. Hydration of C3A in the presence of Ca(OH)2, CaSO4·2H2O and CaCO310.1016/0008-8846(91)90183-I ↗
59. Understanding the filler effect on the nucleation and growth of C-S-H10.1111/jace.13177 ↗
60. Early hydration of cementitious systems accelerated by aluminium sulphate: effect of fine limestone10.1016/j.cemconres.2020.106069 ↗
61. Parameters controlling early age hydration of cement pastes containing accelerators for sprayed concrete10.1016/j.cemconres.2016.09.002 ↗
62. Interactions between alite and C3A-gypsum hydrations in model cements10.1016/j.cemconres.2012.10.018 ↗
63. The hydration of fast setting spray binder versus (aluminum sulfate) accelerated OPC10.1617/s11527-022-01907-x ↗
64. Myers R., G. Geng, E.D. Rodriguez, P.d. Rosa, A.P. Kirchheim, P.J.M. Monteiro, Solution chemistry of cubic and orthorhombic, tricalcium aluminate hydration, Cem. Concr. Res. 100 (2017) 176–185.10.1016/j.cemconres.2017.06.008 ↗
65. A.P. Kirchheim, E.D. Rodríguez, R.J. Myers, L. A. Gobbo, P.J. M. Monteiro, C. C. Dal Molin, Denise, R.B. de Souza, M.A. Cincotto, Effect of Gypsum on the Early Hydration of Cubic and Na-Doped Orthorhombic Tricalcium Aluminate, Materials (Basel, Switzerland) vol. 11 (2018).10.3390/ma11040568 ↗
66. In situ pH monitoring in accelerated cement pastes10.1016/j.cemconres.2022.106808 ↗
67. The origins of thixotropy of fresh cement pastes10.1016/j.cemconres.2011.09.004 ↗
68. Early age hydration of cement pastes with alkaline and alkali-free accelerators for sprayed concrete10.1016/j.conbuildmat.2016.02.101 ↗
69. The influence of alkali-free and alkaline shotcrete accelerators within cement systems: influence of the temperature on the sulfate attack mechanisms and damage10.1016/S0008-8846(02)00967-5 ↗
70. Evolution of elastic behavior of alite paste at early hydration stages10.1111/jace.17354 ↗
71. Understanding the mechanisms behind the time-dependent viscoelasticity of fresh C3A–gypsum paste10.1016/j.cemconres.2020.106084 ↗
72. Understanding silicate hydration from quantitative analyses of hydrating tricalcium silicates10.1038/ncomms10952 ↗
73. Detailed in situ ATR-FTIR spectroscopy study of the early stages of C-S-H formation during hydration of monoclinic C3S10.1016/j.cemconres.2021.106367 ↗
74. In situ 1H-TD-NMR: quantification and microstructure development during the early hydration of alite and OPC10.1016/j.cemconres.2015.10.011 ↗
75. Early hydration and microstructure formation of Portland cement paste studied by oscillation rheology, isothermal calorimetry, 1H NMR relaxometry, conductance and SAXS10.1016/j.cemconres.2020.105977 ↗
76. Muller · 2014
77. Hydration of Tricalcium silicate followed by 29Si NMR with cross-polarization
78. In situ full view of the Portland cement hydration by confocal Raman microscopy
79. Time-resolved combined SAXS and WAXS studies on hydrating tricalcium silicate and cement10.1680/adcr.8.00050 ↗
80. Ectors · 2015
81. Influence of aluminates on the hydration kinetics of tricalcium silicate10.1016/j.cemconres.2017.06.006 ↗
82. Influence of aluminium on the hydration of triclinic C3S with addition of KOH solution10.1016/j.cemconres.2020.106198 ↗
83. Study on the hydration and microstructure of Portland cement containing diethanol-isopropanolamine10.1016/j.cemconres.2014.09.002 ↗
84. Particle characteristics of calcined clays and limestone and their impact on early hydration and sulfate demand of blended cement10.1016/j.cemconres.2022.106736 ↗
85. Myers · Role of Adsorption Phenomena in Cubic tricalcium Aluminate Dissolution, 33 Langmuir ACS Publications · 2017 · 33 · 45
86. Tricalcium aluminate hydration in the presence of lime, gypsum or sodium sulfate10.1016/0008-8846(78)90040-6 ↗
87. The hydration of tricalcium aluminate (Ca3Al2O6) in Portland cement-related systems: a review10.1016/j.cemconres.2023.107150 ↗
88. Interaction of silicate and aluminate reaction in a synthetic cement system: implications for the process of alite hydration10.1016/j.cemconres.2016.12.006 ↗
89. The mechanism of alkali-free liquid accelerator on the hydration of cement pastes10.1016/j.conbuildmat.2019.117296 ↗
90. Ion-specific effects influencing the dissolution of tricalcium silicate10.1016/j.cemconres.2014.02.006 ↗
91. S. Garrault, A. Nonat, Y. Sallier, L. Nicoleau, On the origin of the dormant period of cement hydration, in: 13th International Congress on the Chemistry of Cement ICCC: Conference Proceedings (2011) Contribution ID 380.
92. Hydration of alite containing aluminium10.1179/1743676110Y.0000000007 ↗
93. Influence of spraying on the early hydration of accelerated cement pastes10.1016/j.cemconres.2016.06.005 ↗
94. Comparison between methods for indirect assessment of buildability in fresh 3D printed mortar and concrete10.1016/j.cemconres.2022.106764 ↗