Simultaneous x-ray and neutron 4D tomographic study of drying-driven hydro-mechanical behavior of cement-based materials at moderate temperatures
Source abstract
Abstract
Abstract The drying of cement-based materials is intimately related to their durability, which has significant economic, social and environmental repercussions. The evolution of the saturation of the pore network and the associated drying shrinkage are in fact leading causes of cracking and of the ensuing penetration of aggressive chemicals. This process is highly heterogeneous, due to the thermo-hydric spatial gradients developing in the material from the exposed surfaces to its core and because of local effects, driven by the intrinsically heterogeneous micro-structure (e.g., by the distribution of pores and aggregates). It follows that macroscopic, sample-scale measurements cannot fully disclose the complexity of the underlying processes. In the last few decades, significant advances in full-field techniques have allowed an unprecedented insight into these local processes. For cement-based materials, x-ray and neutron tomography lend themselves as ideal, and highly complementary, tools for the study of their thermo-hydro-mechanical behavior. Notably, the high sensitivity to density variations of x-ray imaging gives access to the developments of fractures, in 4D (3D + time). On the other hand, neutron tomography allows the study of the evolution of the moisture field in 4D, thanks to its high hydrogen sensitivity. The combination of these two techniques provides a unique insight in thermo-hydro-mechanical couplings, e.g., the effect of cracks on the water content field. This contribution presents novel 5D datasets (3D tomographies along time, plus truly simultaneous x-ray and Neutron rapid acquisitions) in-operando of a cement paste and of a concrete sample heated at moderate temperatures (up to 140∘C). The analysis of this 5D data-set (once aligned in time and across modalities) allows for example a quantification of the 4D moisture profiles which were found to predict an overall water loss at hydric equilibrium coherent with the corresponding analytical analysis. In the cement paste sample, the x-ray dataset captures the evolution of an extensive cracking network, opening and propagation toward the core of the sample. A novel analysis procedure is here proposed which allows the extraction of these fractures and the analysis of their interplay with local drying as captured through neutron imaging. This for example reveals the depth of penetration of drying in the vicinity of the fractures along time, which is essential for the assessment and calibration of hydro-mechanical coupled models.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Physics and Applications · Drilling and Well Engineering · Geophysical Methods and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Smil · 2014
2. Modelling the drying shrinkage of porous materials by considering both capillary and adsorption effects10.1016/j.jmps.2020.104016 ↗
3. Tuutti · 1982
4. Experimental investigation of the effect of temperature on the first desorption isotherm of concrete10.1016/j.cemconres.2009.06.019 ↗
5. Temperature influence on water transport in hardened cement pastes10.1016/j.cemconres.2015.05.002 ↗
6. Viggiani · 2012
7. Viggiani · 2019
8. Three-dimensional electrical capacitance tomography – a tool for characterizing moisture transport properties of cement-based materials10.1016/j.matdes.2019.107967 ↗
9. Sorption, anomalous water transport and dynamic porosity in cement paste: a spatially localised 1H NMR relaxation study and a proposed mechanism10.1016/j.cemconres.2020.106045 ↗
10. An MRI-SPI and NMR relaxation study of drying-hydration coupling effect on microstructure of cement-based materials at early age10.1016/j.mri.2004.11.034 ↗
11. Pel · 2008
12. Gammadensimetry: a method to determine drying and carbonation profiles in concrete10.1016/j.ndteint.2005.10.002 ↗
13. Uncertainty of gammadensimetry measurements on concrete specimens
14. Microtensile testing and 3d imaging of hydrated portland cement
15. Tensile failure of micro-concrete: from mechanical tests to fe meso-model with the help of x-ray tomography10.1007/s11012-018-0917-0 ↗
16. Fracture of foamed cementitious materials: a combined experimental and numerical study
17. Yang · 2013 · 236
18. An in-situ x-ray microtomography study of split cylinder fracture in cement-based materials10.1007/s11340-014-9875-1 ↗
19. Stamati · 2020
20. Neutron imaging of hydrogen-rich fluids in geomaterials and engineered porous media: a review10.1016/j.earscirev.2013.11.012 ↗
21. Application of neutron imaging to investigate fundamental aspects of durability of cement-based materials: a review10.1016/j.cemconres.2018.03.003 ↗
22. Neutron imaging for geomechanics: a review
23. The drying process of concrete: a neutron radiography study10.1016/j.apradiso.2004.03.087 ↗
24. Evaluation of water transfer from saturated lightweight aggregate to cement paste matrix by neutron radiography10.1016/j.nima.2009.01.138 ↗
25. Release of internal curing water from lightweight aggregates in cement paste investigated by neutron and x-ray tomography10.1016/j.nima.2011.02.012 ↗
26. Fast tracking of fluid invasion using time-resolved neutron tomography10.1007/s11242-018-1055-9 ↗
27. Fluid-flow measurements in low permeability media with high pressure gradients using neutron imaging: application to concrete10.1016/j.nima.2018.02.039 ↗
28. Quantification of water penetration into concrete through cracks by neutron radiography10.1016/j.nima.2009.01.206 ↗
29. Neutron radiography, a powerful method for investigating water penetration into concrete
30. Neutron imaging of water penetration into cracked steel reinforced concrete10.1016/j.physb.2010.01.065 ↗
31. Observation and quantification of water penetration into strain hardening cement-based composites (shcc) with multiple cracks by means of neutron radiography10.1016/j.nima.2010.04.119 ↗
32. Neutron radiography, a powerful method to determine time-dependent moisture distributions in concrete10.1016/j.nucengdes.2011.02.031 ↗
33. Application of neutron radiography in observing and quantifying the time-dependent moisture distributions in multi-cracked cement-based composites10.1016/j.cemconcomp.2016.12.006 ↗
34. Transport of water through strain-hardening cement-based composite (shcc) applied on top of cracked reinforced concrete slabs with and without hydrophobization of cracks - investigation by neutron radiography10.1016/j.conbuildmat.2014.11.062 ↗
35. Moisture transport in a concrete of the snr 300 investigated by neutron transmission
36. Analysis of moisture migration in concrete at high temperature through in-situ neutron tomography10.1016/j.cemconres.2018.06.010 ↗
37. Quantification of evolving moisture profiles in concrete samples subjected to temperature gradient by means of rapid neutron tomography: influence of boundary conditions, hygro-thermal loading history and spalling mitigation additives10.1111/str.12371 ↗
38. Next-grenoble, the neutron and x-ray tomograph in grenoble10.1016/j.nima.2020.163939 ↗
39. Liquid water uptake in unconfined callovo oxfordian clay-rock studied with neutron and x-ray imaging10.1007/s11440-018-0639-4 ↗
40. Dynamics of water absorption in callovo-oxfordian claystone revealed with multimodal x-ray and neutron tomography10.3389/feart.2020.00006 ↗
41. A multiphase thermo-hydro-mechanical model for concrete at high temperatures—finite element implementation and validation under loca load10.1016/j.nucengdes.2007.03.047 ↗
42. Influence of common simplifications on the drying of cement-based materials up to moderate temperatures10.1016/j.ijheatmasstransfer.2019.119254 ↗
43. New continuous strain-based description of concrete’s damage-permeability coupling10.1002/nag.2808 ↗
44. Chaplin
45. The effect of additives on the reaction of portland and alumina cement components with water. time resolved powder neutron diffraction investigations10.3891/acta.chem.scand.40a-0126 ↗
46. Hydration of tricalcium silicate with d2o10.1007/BF00723787 ↗
47. Yehya · 2018
48. An iterative image registration technique with an application to stereo vision
49. spam: Software for practical analysis of materials10.21105/joss.02286 ↗
50. An extension of digital volume correlation for multimodality image registration10.1088/1361-6501/aa7b48 ↗
51. The colours of concrete as seen by x-rays and neutrons10.1016/j.cemconcomp.2019.103336 ↗
52. Kraemer · 1931
53. A threshold selection method from gray-level histograms10.1109/TSMC.1979.4310076 ↗
54. Beare · 2006
55. Vu · 2007
56. Multicomponent modelling of cement paste dehydration under different heating rates
57. Scattering corrections in neutron radiography using point scattered functions10.1016/j.nima.2005.01.159 ↗
58. Rougelot · 2008