Strain-rate-dependent performance of cementitious nanocomposites: Nanosilica and the role of dispersion
Source abstract
Abstract
This study focused on the strain-rate-dependent effects of powder nanosilica (PNS) and its dispersion on the mechanical properties, fracture pattern and energy absorption of cement composites by investigating its quasi-static strain rate (QS), intermediate strain rate (ISR) and high strain rate (HSR) behaviour. To this end, a Split Hopkinson Pressure Bar equipped with a high-speed camera was utilised. Additionally, SEM and dispersion investigations were conducted to study the microstructural effects of PNS and its dispersion state, respectively, and link them to its mechanical contributions. We found that, although NS significantly improved QS properties, it negatively affected the dynamic (ISR and HSR) performance of the cement paste. These negative dynamic effects were found to be primarily controlled by the dispersion state of the nanomaterial. Although dispersing the PNS partially ameliorated the negative dynamic effects, it did not fully resolve them. The dispersion effect was more pronounced under HSR loading.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Nano reinforced cement and concrete composites and new perspective from graphene oxide10.1016/j.conbuildmat.2014.09.040 ↗
2. Effects of nano silica on the properties of cement-based materials: a comprehensive review10.1016/j.conbuildmat.2021.122715 ↗
3. Effects of different nanomaterials on hardening and performance of ultra-high strength concrete (UHSC)10.1016/j.cemconcomp.2016.03.003 ↗
4. Effect of carbon nanotube and graphite nanoplatelet on composition, structure, and nano-mechanical properties of C-S-H in UHPC10.1016/j.cemconres.2022.106713 ↗
5. Using graphene oxide to strengthen the bond between PE fiber and matrix to improve the strain hardening behavior of SHCC10.1016/j.cemconres.2019.105899 ↗
6. Influence of nano-SiO2 on properties of fresh and hardened high performance concrete: a state-of-the-art review10.1016/j.conbuildmat.2017.05.059 ↗
7. Effect of nano-SiO2 particles and curing time on development of fiber-matrix bond properties and microstructure of ultra-high strength concrete10.1016/j.cemconres.2017.02.031 ↗
8. Reduction of the calcium leaching rate of cement paste by addition of silica nanoparticles10.1016/j.cemconres.2008.03.021 ↗
9. Effects of highly dispersed nano-SiO2 on the microstructure development of cement pastes10.1617/s11527-019-1431-0 ↗
10. Accelerating effects of colloidal nano-silica for beneficial calcium-silicate-hydrate formation in cement10.1016/j.cplett.2004.05.071 ↗
11. Recent advances in understanding the role of supplementary cementitious materials in concrete10.1016/j.cemconres.2015.03.018 ↗
12. Influence of colloidal silica sol on fresh properties of cement paste as compared to nano-silica powder with agglomerates in micron-scale10.1016/j.cemconcomp.2015.08.002 ↗
13. Effect and mechanism of colloidal silica sol on properties and microstructure of the hardened cement-based materials as compared to nano-silica powder with agglomerates in micron-scale10.1016/j.cemconcomp.2019.02.015 ↗
14. Studies on optimization of silica nanoparticles dosage in cementitious system10.1016/j.cemconcomp.2016.03.006 ↗
15. Effect of nano-SiO2 and nano-TiO2 addition on the rheological behavior and the hardened properties of cement mortars10.1016/j.msea.2011.10.102 ↗
16. Effects of nano-silica and nano-limestone on flowability and mechanical properties of ultra-high-performance concrete matrix10.1016/j.conbuildmat.2015.05.137 ↗
17. Effect of nanosilica on durability and mechanical properties of high-strength concrete10.1680/jmacr.14.00338 ↗
18. The effect of colloidal nano-silica on workability, mechanical and durability properties of high performance concrete with copper slag as partial fine aggregate10.1016/j.conbuildmat.2016.03.119 ↗
19. Loading-rate-dependent effects of colloidal nanosilica on the mechanical properties of cement composites10.1016/j.cemconcomp.2022.104583 ↗
20. A review of dispersion of nanoparticles in cementitious matrices: nanoparticle geometry perspective10.1016/j.conbuildmat.2017.06.164 ↗
21. Characterizing cement paste containing SRA modified nanoSiO2 and evaluating its strength development and shrinkage behavior10.1016/j.cemconcomp.2016.11.001 ↗
22. Synthesis of nanoSiO2@ graphene-oxide core-shell nanoparticles and its influence on mechanical properties of cementitious materials10.1016/j.conbuildmat.2019.117619 ↗
23. Effects of anionic and nonionic surfactants on the dispersion and stability of nanoSiO2 in aqueous and cement pore solutions10.1016/j.cemconres.2021.106417 ↗
24. Influence of MWCNT/surfactant dispersions on the rheology of Portland cement pastes10.1016/j.cemconres.2018.02.020 ↗
25. Dynamic mechanical properties and fracturing behaviour of concrete under biaxial compression10.1016/j.conbuildmat.2021.124085 ↗
26. Rate dependent behavior and modeling of concrete based on SHPB experiments10.1016/j.cemconcomp.2014.07.011 ↗
27. Experimental confirmation of some factors influencing dynamic concrete compressive strengths in high-speed impact tests10.1016/j.cemconres.2013.05.008 ↗
28. A review on split hopkinson bar experiments on the dynamic characterisation of concrete10.1016/j.conbuildmat.2018.09.187 ↗
29. Progressive fracturing of concrete under biaxial confinement and repetitive dynamic loadings: from damage to catastrophic failure10.1016/j.ijimpeng.2022.104232 ↗
30. Dynamic compressive properties of reactive powder concrete at high temperature: a review10.1016/j.cemconcomp.2020.103568 ↗
31. A review of dynamic experimental techniques and mechanical behaviour of rock materials10.1007/s00603-013-0463-y ↗
32. Influence of pore structure on mechanical behavior of concrete under high strain rates10.1061/(ASCE)MT.1943-5533.0001380 ↗
33. Quasi-static and dynamic compressive behavior of ultra-high toughness cementitious composites in dry and wet conditions10.1016/j.conbuildmat.2019.117008 ↗
34. Free water effect on the dynamic compressive properties of mortar10.1016/j.cemconcomp.2021.103933 ↗
35. Compressive behaviour of recycled aggregate concrete under impact loading10.1016/j.cemconres.2015.01.014 ↗
36. Strain rate effect on compressive stress–strain curves of recycled aggregate concrete with seawater and sea sand10.1016/j.conbuildmat.2021.124014 ↗
37. A review of nanofluid stability properties and characterization in stationary conditions10.1016/j.ijheatmasstransfer.2011.04.014 ↗
38. Investigation on dispersion of graphene oxide in cement composite using different surfactant treatments10.1016/j.conbuildmat.2017.11.154 ↗
39. Ncorr: open-source 2D digital image correlation matlab software10.1007/s11340-015-0009-1 ↗
40. A review of mechanisms and models for dynamic failure, strength, and fragmentation10.1016/j.pss.2014.11.010 ↗
41. Assessing strain rate sensitivity of cement paste at the micro-scale through micro-cantilever testing10.1016/j.cemconcomp.2021.104084 ↗
42. Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete10.1016/j.conbuildmat.2013.05.063 ↗