journal article·2015-07

Analysis of Portland cement mortar under impact: A combined material characterization, micromechanics modeling, and dynamic testing approach

Nathan P. Mayercsik, Matt Shaeffer, Lori Graham-Brady, Kimberly E. Kurtis

Publisher page

Abstract

Toward the development of a constitutive model for describing high strain-rate behavior of cementitious materials, this study couples multiscale quantitative characterization of mortars with micromechanics modeling, validated against dynamic experiments. Blast or impact loads create a far-field compressive loading condition that drives local tensile crack growth from flaws. Two flaw types – round (e.g., entrained air voids) and slit (e.g., tandem effect of the interfacial transition zone and the aggregates) flaws – are considered in this flaw-driven, elastic model for predicting strength at high strain-rates. The model sheds light on the linkage between meso-scale fluctuations of the flaw populations (including size, shape, and spatial arrangement) and the material's overall dynamic response. Dynamic strength is interpreted in a statistical framework rather than a deterministic one. Micromechanics results agree with Kolsky bar tests on mortars with and without air entrainment. The model may be useful for engineering concrete for potentially at-risk elements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rock Mechanics and Modeling · High-Velocity Impact and Material Behavior · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Numerical study of dynamic behavior of concrete by meso-scale particle element modeling10.1016/j.ijimpeng.2011.07.004 ↗
2. Effect of rate of application of load on the compressive strength of concrete
3. Compressive behavior of concrete at high strain rates10.1007/BF02472016 ↗
4. Modeling of structures subjected to impact: concrete behaviour under high strain rate10.1016/S0958-9465(01)00060-9 ↗
5. Dynamic behavior and constitutive model of concrete at different strain rates10.1680/macr.2008.60.4.271 ↗
6. Strain rate model for dynamic analysis of reinforced concrete structures10.1016/S0167-6636(00)00035-1 ↗
7. Numerical investigation of concrete subjected to compressive impact loading. Part 1: A fundamental explanation for the apparent strength gain at high loading rates
8. Numerical investigation of concrete subjected to compressive impact loading. Part 2: parametric investigation of factors affecting behaviour at high loading rates
9. Numerical investigation of concrete subjected to high rates of uniaxial tensile loading10.1016/j.ijimpeng.2007.03.006 ↗
10. Modelling of compressive behaviour of concrete-like materials at high strain rate10.1016/j.ijsolstr.2008.04.002 ↗
11. An interacting micro-crack damage model for failure of brittle materials under compression10.1016/j.jmps.2007.06.012 ↗
12. Effect of crack growth dynamics on the rate-sensitive behavior of hot-pressed boron carbide10.1016/j.scriptamat.2007.05.028 ↗
13. Direct observation of the dynamic compressive failure of a transparent polycrystalline ceramic (AlON)10.1111/j.1551-2916.2006.00965.x ↗
14. A microscopic approach to rate effect on compressive strength of concrete10.1016/j.engfracmech.2005.01.012 ↗
15. Fracture characteristics of concrete subjected to impact loads10.1007/s11433-009-0268-x ↗
16. Statistical characterization of meso-scale uniaxial compressive strength in brittle materials with randomly occurring flaws10.1016/j.ijsolstr.2010.04.034 ↗
17. Modeling Dynamic Brittle Behavior of Materials with Circular Flaws or Pores10.1016/j.ijsolstr.2013.11.004 ↗
18. Mindess · 2003
19. Coussy · 2010
20. ACI Committee 201 · 2001
21. International Code Council, Inc · 2009
22. ACI Committee 446 · 2004
23. A probabilistic technique for entrained air void analysis in hardened concrete10.1016/j.cemconres.2014.01.023 ↗
24. X-ray microtomography10.1016/j.matchar.2010.09.012 ↗
25. On a new class of ‘contagious’ distributions10.1214/aoms/1177732245 ↗
26. Compressive behavior of concrete at high strain rates10.1007/BF02472016 ↗
27. American Society for Testing and Materials · 2013
28. American Society for Testing of Materials · 2013
29. American Society for Testing and Materials · 2012
30. Three-dimensional computer simulation of portland cement hydration and microstructure development10.1111/j.1151-2916.1997.tb02785.x ↗
31. Structure and physical properties of hardened portland cement paste10.1111/j.1151-2916.1958.tb13494.x ↗
32. Three-phase model of the elastic and shrinkage properties of mortar10.1016/S1065-7355(96)90058-9 ↗
33. A hard core/soft shell microstructural model for studying percolation and transport in three-dimensional composite media
34. Multi-scale picture of concrete and its transport properties: introduction for non-cement researchers
35. Percolation and pore structure in mortars and concrete10.1016/0008-8846(94)90079-5 ↗
36. The failure of brittle solids containing small cracks under compressive stress states10.1016/0001-6160(86)90086-6 ↗
37. Russ · 2000
38. Torquato · 2000
39. Micromechanical model and associated validation for dynamic failure of brittle materials containing pores and slit-like flaws
40. Micromechanics: overall properties of heterogeneous solids
41. Concrete-to-concrete friction10.1061/(ASCE)0733-9445(1987)113:4(832) ↗
42. Fracture toughness of cement paste and mortars10.1016/0008-8846(73)90085-9 ↗
43. An investigation of the mechanical properties of materials at very high rates of loading10.1088/0370-1301/62/11/302 ↗
44. Visualization of the failure of quartz under quasi-static and dynamic compression10.1029/2009JB007006 ↗
45. A split Hopkinson bar technique for low-impedance materials10.1007/BF02323102 ↗
46. Split-Hopkinson pressure bar tests on concrete and mortar in tension and compression
47. Effects of strain rate on concrete strength
48. Dynamic behavior of concrete at high strain rates and pressures: I. experimental characterization10.1016/S0734-743X(01)00020-3 ↗
49. Chen · 2011
50. High strain rate and impact testing10.1007/978-0-387-30877-7_33 ↗
51. Multifunctional periodic cellular metals10.1098/rsta.2005.1697 ↗
52. Strain rate effects in porous materials10.1557/PROC-521-103 ↗
53. Is Weibull distribution the correct model for predicting probability of failure initiated by non-interacting flaws?10.1016/j.ijsolstr.2008.09.033 ↗
54. Fracture statics of ceramics — Weibull statistics and deviations from Weibull statistics10.1016/j.engfracmech.2006.05.028 ↗
55. Is Weibull's modulus really a material constant? Example case with interacting collinear cracks10.1016/j.ijsolstr.2005.08.002 ↗
56. Aggregate/mortar interface: influence of silica fume at the micro- and macro-level10.1016/S0958-9465(02)00095-1 ↗
57. Experimental investigation and analytical modeling of the σ–ε characteristics in compression of heat-treated ultra-high strength mortars produced from conventional materials10.1016/j.conbuildmat.2013.08.068 ↗
58. Yang · 2007
59. Federal Emergency Management Administration · 2008
60. Discrete modeling of ultra-high-performance concrete with application to projectile penetration10.1016/j.ijimpeng.2013.10.008 ↗