The intrinsic mechanical properties of hydromagnesite, Mg5(CO3)4(OH)2·4H2O, a key phase of reactive MgO carbonate cement
Source abstract
Abstract
To potentially enable CO 2 sequestration, reactive MgO carbonate cement is emerging as an alternative binder to Portland cement. Understanding the mechanical properties of its binding phase is critical for understanding the strength development and performing materials design for reactive MgO cement systems; however, the intrinsic mechanical properties of hydromagnesite (Mg 5(CO 3) 4(OH) 2·4H 2 O), a key binding phase, remain unexplored. The present study utilized synchrotron-based high-pressure X-ray diffraction to determine the unit cell-scale, intrinsic mechanical properties of hydromagnesite for the first time. Up to hydrostatic loading of 7.7 GPa, the bulk modulus of hydromagnesite was determined as 59 GPa or 71 GPa fitted using the second-order or third-order Birch-Murnaghan equation of state, which we contextualize with binding phases in various cement systems. The experiment results are applicable in materials design of low-carbon concrete and valuable for the validation and calibration of atomistic models.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Concrete and Cement Materials Research · High-pressure geophysics and materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. 2018
2. Decarbonizing cement production10.1016/j.joule.2021.04.011 ↗
3. Environmental impacts and decarbonization strategies in the cement and concrete industries10.1038/s43017-020-0093-3 ↗
4. Environmental impacts of alternative cement binders10.1021/acs.est.9b05550 ↗
5. Achieving net zero greenhouse gas emissions in the cement industry via value chain mitigation strategies10.1016/j.oneear.2021.09.011 ↗
6. Calcium carbonate cement: a carbon capture, utilization, and storage (CCUS) technique10.3390/ma14112709 ↗
7. Influence of mix design on the carbonation, mechanical properties and microstructure of reactive MgO cement-based concrete10.1016/j.cemconcomp.2017.03.004 ↗
8. Comparative life cycle assessment of reactive MgO and Portland cement production10.1016/j.jclepro.2016.07.071 ↗
9. Accelerated carbonation of reactive MgO and Portland cement blends under flowing CO2 gas10.1016/j.cemconcomp.2019.103489 ↗
10. Hydration, carbonation, strength development and corrosion resistance of reactive MgO cement-based composites10.1016/j.cemconres.2019.105941 ↗
11. Mechanical and microstructural changes in reactive magnesium oxide cement-based concrete mixes subjected to high temperatures10.1016/j.cemconcomp.2021.103955 ↗
12. Production of reactive magnesia from desalination reject brine and its use as a binder10.1016/j.jcou.2020.101383 ↗
13. Mechanical properties of struvite-K: a high-pressure X-ray diffraction study10.1016/j.cemconres.2020.106171 ↗
14. Preferred orientation of calcium silicate hydrate and its implication to concrete creep10.1016/j.compositesb.2022.110297 ↗
15. The crystal structure of hydromagnesite10.1107/S0567740874007771 ↗
16. DIOPTAS: a program for reduction of two-dimensional X-ray diffraction data and data exploration10.1080/08957959.2015.1059835 ↗
17. Cheary
18. Laugier · 2002
19. High pressure study of low compressibility tetracalcium aluminum carbonate hydrates 3CaO·Al2O3·CaCO3·11H2O10.1016/j.cemconres.2011.08.004 ↗
20. Influences of cross-linking and Al incorporation on the intrinsic mechanical properties of tobermorite10.1016/j.cemconres.2020.106170 ↗
21. The nanomechanical properties of non-crosslinked calcium aluminosilicate hydrate: the influences of tetrahedral Al and curing age10.1016/j.cemconres.2022.106900 ↗
22. High-pressure behaviour and equation of state of calcite, CaCO310.1007/s004100050471 ↗
23. Effects of temperature and composition on the bulk modulus of (Mg,Fe)O10.2138/am-1999-0308 ↗
24. Structure and intrinsic mechanical properties of nanocrystalline calcium silicate hydrate10.1021/acssuschemeng.0c03230 ↗
25. A high-pressure X-ray diffraction study of the crystalline phases in calcium aluminate cement paste10.1016/j.cemconres.2018.03.004 ↗
26. In situ X-ray diffraction of aragonite and dolomite at high pressure and high temperature: evidence for dolomite breakdown to aragonite and magnesit10.2138/am-1996-5-608 ↗
27. Static compression and H disorder in brucite, Mg(OH)2, to 11 GPa: a powder neutron diffraction study10.1007/BF00202300 ↗
28. Effect of pressure on the crystal structure of ettringite10.1016/j.cemconres.2007.08.029 ↗
29. Pressure induced reactions amongst calcium aluminate hydrate phases10.1016/j.cemconres.2011.02.004 ↗
30. Williamson–Hall anisotropy in nanocrystalline metals: X-ray diffraction experiments and atomistic simulations10.1016/j.actamat.2007.09.007 ↗
31. Microstructural parameters from X-ray peak profile analysis by Williamson-hall models; a review10.1016/j.matpr.2021.06.256 ↗
32. Calibration of the pressure dependence of the R 1 ruby fluorescence line to 195 kbar10.1063/1.321957 ↗