Factors influencing the hydration kinetics of ye'elimite; effect of free lime
Source abstract
Abstract
This study investigates factors influencing the hydration of ye`elimite, comparing stoichiometric ye`elimite-rich clinkers with and without free lime (Y-C and Y, respectively). Although the hydration sequences and products were similar, there were notable differences in their kinetics. Y-C exhibited rapid hydration upon contact with water, followed by a significant slowdown within minutes. Contrary, Y demonstrates a slower early hydration , but reached the main hydration period earlier and proceeded more rapidly thereafter. Solution analyses revealed higher initial calcium and aluminium concentrations for Y-C, while the sulfur concentration was reduced. This was attributed to the rapid dissolution of free lime, along with some ye`elimite, resulting in the instantaneous formation of ettringite and aluminium hydroxide. Consequently, the solution composition was altered, causing delayed onset of monosulfate formation and main hydration period. These findings contribute to understanding the hydraulic reactivity of ye`elimite and its potential implications for cement production processes.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. CSA raw mix design: effect on clinker formation and reactivity10.1617/s11527-014-0451-z ↗
2. Chen · 2009
3. Hydration of calcium sulfoaluminate cements – experimental findings and thermodynamic modelling10.1016/j.cemconres.2009.08.014 ↗
4. Development of the use of sulfo- and ferroaluminate cements in China10.1680/adcr.1999.11.1.15 ↗
5. Industrially interesting approaches to “low-CO2” cements10.1016/j.cemconres.2004.01.021 ↗
6. Phase equilibria in the system Ca4Al6O12SO4 - Ca2SiO4 - CaSO4 - H2O referring to the hydration of calcium sulfoaluminate cements10.21809/rilemtechlett.2016.5 ↗
7. Hydration reactions and stages of clinker composed mainly of stoichiometric ye’elimite10.1016/j.cemconres.2018.10.023 ↗
8. Hydraulic activity of C4A3Cr in presence of C4A3s10.1023/A:1022823003120 ↗
9. Formation and hydraulic behaviour of chromium-phosphorus doped calcium sulfoaluminate cement10.1016/j.tca.2005.03.004 ↗
10. Hydration mechanisms of two polymorphs of synthetic ye’elimite10.1016/j.cemconres.2014.05.010 ↗
11. Hydration behavior of iron doped calcium sulfoaluminate phase at room temperature (N°: 1P-368)
12. Studies on the early hydration of two modifications of ye’elimite with sulfate10.1016/j.cemconres.2016.11.009 ↗
13. The influence of ferric oxide on the properties of 3CaO·3Al2O3·CaSO410.1016/0040-6031(93)80089-S ↗
14. Effect of raw mix design and of clinkering process on the formation and mineralogical composition of (ternesite) belite calcium sulphoaluminate ferrite clinker10.1016/j.cemconres.2014.02.004 ↗
15. Iron solid solutions of ye’elimite - effect on reactivity
16. Factors influencing the hydration kinetics of ye’elimite; effect of mayenite10.1016/j.cemconres.2018.10.026 ↗
17. Rietveld quantitative phase analysis of Ye’elimite-containing cements10.1016/j.cemconres.2012.03.018 ↗
18. Mechanisms of early ettringite formation in ternary CSA–OPC–anhydrite systems10.1680/jadcr.18.00115 ↗
19. Relating phase transitions to pore size distributions and mechanical mortar properties in CSA-OPC-C$ based systems – the potential impact of delayed straetlingite formation
20. Influence of set retarding admixtures on calcium sulfoaluminate cement hydration and property development10.1016/j.cemconres.2017.11.005 ↗
21. Influence of sodium borate on the early age hydration of calcium sulfoaluminate cement10.1016/j.cemconres.2014.12.010 ↗
22. Effect of borax on rheology of calcium sulphoaluminate cement paste in the presence of polycarboxylate superplasticizer10.1016/j.conbuildmat.2017.02.005 ↗
23. Effect of retarders on the early hydration of calcium-sulpho-aluminate (CSA) type cements10.1016/j.cemconres.2016.02.014 ↗
24. The role of boron during the early hydration of belite ye’elimite ferrite cements10.1016/j.conbuildmat.2019.04.176 ↗
25. GEM-Selektor geochemical modeling package: revised algorithm and GEMS3K numerical kernel for coupled simulation codes
26. Hummel · 2002
27. Thoenen
28. Thermodynamic modelling of the hydration of Portland cement10.1016/j.cemconres.2005.03.001 ↗
29. Thermodynamic properties of Portland cement hydrates in the system CaO–Al2O3–SiO2–CaSO4–CaCO3–H2O10.1016/j.cemconres.2007.06.002 ↗
30. Early hydration of ye’elimite: insights from thermodynamic modelling10.1016/j.cemconres.2019.03.024 ↗
31. Thermodynamic properties and hydration behavior of ye’elimite
32. Thermodynamics and cement science10.1016/j.cemconres.2011.03.018 ↗
33. Application of thermodynamic modelling to hydrated cements
34. Formation, composition and stability of ye’elimite and iron-bearing solid solutions
35. Effects of temperature on the hydration characteristics of free lime10.1016/S0008-8846(02)00714-7 ↗
36. Influence of calcium sulfate and calcium hydroxide on the hydration of calcium sulfoaluminate clinker
37. Influence of a thermal cycle at early age on the hydration of calcium sulphoaluminate cements with variable gypsum contents10.1016/j.cemconres.2010.10.001 ↗
38. The impact of intrinsic anhydrite in an experimental calcium sulfoaluminate cement from a novel, carbon-minimized production process
39. Effect of hydration kinetics on properties of compositionally similar binders10.1016/j.cemconres.2017.08.005 ↗
40. Thermal decomposition of monocalcium aluminate decahydrate (CaAl2O4·10H2O) investigated by in-situsynchrotron X-ray powder diffraction, thermal analysis and 27Al, 2H MAS NMR spectroscopy10.1039/B712684K ↗
41. Studies of conversion progress of calcium aluminate cement hydrates by thermal analysis method10.1007/s10973-014-3804-5 ↗
42. Preparation of gelatinous aluminium hydroxide
43. Formation mechanism of aluminium hydroxide polymorphs10.1346/CCMN.1993.0410509 ↗
44. Thermogravimetric analysis
45. Effect of temperature on setting time of calcium aluminate cements
46. The impact of calium aluminate cement hydration upon the properties of refractory castables
47. Bullerjahn · 2018
48. Chemical shrinkage of ye’elimite with and without gypsum addition10.1016/j.conbuildmat.2018.12.170 ↗
49. Hydration and performance evolution of belite–ye’elimite–ferrite cement10.1680/jadcr.18.00110 ↗
50. Chemical mechanisms and kinetic modeling of calcium aluminate cements hydration in diluted systems: role of aluminium hydroxide formation
51. Thermodynamic prediction of complex hydration processes and verification by experiments for the Ca-Al-C (CA, calcite, water) and Ca-Al-S (ye’elimite, gypsum, water) systems