journal article·2025-03

Effects of environmental exposure on Portland cement Type IL

Rotana Hay, Parham Aghdasi

Publisher page

Abstract

This study investigates the physico-chemical change in a Type IL cement prehydrated in the natural environment for 7, 14, and 21 days. A focus was made on the reaction kinetics, product formation, and strength development using calorimetry, XRF, QXRD, TGA and compressive testing. It was found that prehydration converted hemihydrate to gypsum and partially transformed the principal cement phases and inherent portlandite into carbonates, thus reducing C 3S and C 2S while increasing CaCO 3 and gypsum. Hydration was slowed down with a delay in the appearance of the aluminate peak and reduction in cumulative heat at 72 h. Consequently, more C 3S and C 2S remained at an early age. Less ettringite was formed while amorphous phases were initially reduced but promoted later on. A secondary decomposition peak linked to metastable CaCO 3 became more prominent in the prehydrated samples. The early-age strength was reduced with the exposure time, but the 28-day strength improved due to the continuing hydration.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Interaction of water vapour with anhydrous cement minerals10.1179/174367509X12554402491029 ↗
2. Effects of exposure to atmospheric moisture and CO2 on the performance of a ternary binder system and chemical admixtures in a self-levelling underlayment10.1016/j.conbuildmat.2022.128911 ↗
3. New insights into the prehydration of cement and its mitigation10.1016/j.cemconres.2015.01.012 ↗
4. Impact of environmental moisture on C3A polymorphs in the absence and presence of CaSO4· 0· 5 H2O10.1680/adcr.12.00062 ↗
5. Prehydration of calcium sulfoaluminate (CSA) clinker at different relative humidities10.1016/j.cemconres.2021.106423 ↗
6. The effect of prehydration on the engineering properties of CEM I Portland cement10.1680/adcr.12.00030 ↗
7. E. Dubina, R. Sieber, J. Planck, L. Black, Effects of pre-hydration on hydraulic properties on Portland cement and synthetic clinker phases, Cement and Concrete Science.
8. Influence of cement ageing and addition time on the performance of superplasticizers
9. Effect of calcium sulfoaluminate cement prehydration on hydration and strength gain of calcium sulfoaluminate cement-ordinary portland cement mixtures10.1016/j.cemconcomp.2020.103694 ↗
10. Effect of particle size distribution on the pre-hydration, hydration kinetics, and mechanical properties of calcium sulfoaluminate cement10.1016/j.conbuildmat.2023.132497 ↗
11. Effect of pre-hydration age on phase assemblage, microstructure and compressive strength of CO2 cured cement mortar10.1016/j.conbuildmat.2022.126760 ↗
12. Application of nanoindentation to investigate chemomechanical properties change of cement paste in the carbonation reaction10.1007/s11431-011-4571-1 ↗
13. American Society for Testing and Materials (ASTM) · 2017
14. American Society for Testing and Materials (ASTM) · 2020
15. Comparison of methods for arresting hydration of cement10.1016/j.cemconres.2011.06.003 ↗
16. Scrivener · 2016
17. American Society for Testing and Materials (ASTM) · 2021
18. American Society for Testing and Materials (ASTM), ASTM C204: Standard test Method for Fineness of Hydraulic Cement by Air-permeability Apparatus ASTM International, 100 Barr Harbor Dr., PO box C-700, West Conshohocken, Pennsylvania, 19428–2959. United States, 2018.
19. Hydration development of mineral additives blended cement using thermogravimetric analysis (TGA): methodology of calculating the degree of hydration10.1016/j.conbuildmat.2017.04.132 ↗
20. Shrinkage, hydration, and strength development of limestone calcined clay cement (LC3) with different sulfation levels10.1016/j.cemconcomp.2021.104403 ↗
21. Correlation of the Blaine value and the d80 size of the cement particle size distribution
22. Measuring cement particle size and surface area by laser diffraction, National Cooperative Highway Research Program
23. Effects of decalcification on the microstructure and surface area of cement and tricalcium silicate pastes10.1016/j.cemconres.2004.04.007 ↗
24. Phase evolution, micromechanical properties, and morphology of calcium (alumino)silicate hydrates C-(A-)S-H under carbonation10.1016/j.cemconres.2021.106683 ↗
25. Effect of temperature and aluminium on calcium (alumino) silicate hydrate chemistry under equilibrium conditions10.1016/j.cemconres.2014.10.015 ↗
26. Influence of calcium to silica ratio on aluminium uptake in calcium silicate hydrate10.1016/j.cemconres.2016.01.014 ↗
27. The gypsum–anhydrite paradox revisited10.1016/j.chemgeo.2014.07.026 ↗
28. Conversion of gypsum to anhydrite in aqueous salt solutions10.1016/0016-7037(64)90154-1 ↗
29. The crystal structure of parawollastonite10.1524/zkri.1968.127.16.291 ↗
30. Understanding the adsorption of calcium sulfate on tetracalcium aluminoferrite and tricalcium aluminate surfaces10.1111/jace.19350 ↗
31. A review of carbon dioxide sequestration by mineral carbonation of industrial byproduct gypsum10.1016/j.jclepro.2021.126930 ↗
32. American Society for Testing and Materials (ASTM), ASTM C1679 − 17: Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry, ASTM International 100 Barr Harbor Dr., PO box C-700, West Conshohocken, Pennsylvania 2017.
33. Mechanisms and parameters controlling the tricalcium aluminate reactivity in the presence of gypsum10.1016/j.cemconres.2007.06.001 ↗
34. Comparative performance of OPC and LC3-based composites under combined action of carbonation and chloride exposure10.1016/j.conbuildmat.2024.136428 ↗
35. Christensen · J. Solid State Chem. · 2004 · 177 · 194410.1016/j.jssc.2003.12.030 ↗
36. Advances in understanding hydration of Portland cement10.1016/j.cemconres.2015.05.025 ↗
37. The influence of the filler effect on the sulfate requirement of blended cements10.1016/j.cemconres.2019.105918 ↗
38. Studies on the carboaluminate formation in limestone filler-blended cements10.1016/S0008-8846(01)00491-4 ↗
39. Celik · 2015
40. Effect of SO3 content and fineness on the rate of delayed ettringite formation in heat cured Portland cement mortars10.1016/j.cemconcomp.2006.06.003 ↗
41. Effect of volcanic ash pozzolan or limestone replacement on hydration of Portland cement10.1016/j.conbuildmat.2018.11.193 ↗
42. Taylor · 1997
43. Thermal decomposition of ettringite Ca6[Al(OH)6]2(SO4)3·26H2O10.1039/FT9969202125 ↗
44. Ramachandran · 2002
45. Transition and decomposition temperatures of cement phases–a collection of thermal analysis data
46. Calcium silicate carbonation products10.1111/j.1151-2916.1995.tb09057.x ↗
47. Carbonation, strength development, and characterization of calcined limestone as a potential construction material10.1016/j.cemconres.2020.106263 ↗
48. Investigation of the carbonation mechanism of CH and CSH in terms of kinetics, microstructure changes and moisture properties10.1016/j.cemconres.2013.11.015 ↗
49. Filler effects of CaCO3 polymorphs derived from limestone and seashell on hydration and carbonation of reactive magnesium oxide (MgO) cement (RMC)10.1016/j.cemconres.2022.107040 ↗