journal article·2025-08Open access

Repeatability and reproducibility challenges of isothermal heat flow calorimetry with in situ mixing

Elisabeth John, Cordula Jakob, Ursula Pott, Mona Sando

Abstract

Isothermal heat flow calorimetry evaluates heat development during binder reactions. It distinguishes between in situ calorimetry , where mixing occurs within the device, and ex situ calorimetry, involving externally mixed samples. Despite ex situ calorimetry being a standard method in binder research, in situ calorimetry is underutilized. This paper aims to promote its adoption by summarizing challenges related to repeatability and reproducibility and offering solutions. The initial section addresses repeatability issues caused by preventable errors, providing a structured guide for experimental design . It was found that water leakage had minimal impact, and sample size is crucial for data robustness. The second section examines operational challenges, revealing that frictional heating , affecting recorded heat, can be minimized with an optimized mixing protocol. The final part highlights that significant errors in measured data stem from signal delay and heat loss, offering methods to correct these issues for improved reproducibility in in situ calorimetric experiments.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · thermodynamics and calorimetric analyses · Nanopore and Nanochannel Transport Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. The vane calorimeter
2. The Significance of Early Heat Liberation of Cement Paste
3. Operational issues in isothermal calorimetry10.1016/j.cemconres.2010.03.017 ↗
4. New insights into the early-age reaction kinetics of metakaolin geopolymer by 1H low-field NMR and isothermal calorimetry
5. Chuewangkam · 2024
6. Comparing phase development and rheological properties of OPC paste within the first hour of hydration
7. Early age hydration, rheology and pumping characteristics of CSA cement-based 3D printable concrete10.1016/j.conbuildmat.2020.122136 ↗
8. Early-age hydration mechanism of ternary binders: quantitative relation between microstructure evolution and strength build-up10.1016/j.cemconres.2023.107191 ↗
9. Relating ettringite formation and rheological changes during the initial cement hydration: a comparative study applying XRD analysis, rheological measurements and modeling10.3390/ma12182957 ↗
10. Temperature and activator effect on early-age reaction kinetics of alkali-activated slag binders10.1016/j.conbuildmat.2016.03.098 ↗
11. A calorimetric study of early hydration of alkali-slag cements10.1016/0008-8846(95)00126-W ↗
12. Influence of water repellent on the property of solid waste based sulfoaluminate cement paste and its application in lightweight porous concrete10.1016/j.conbuildmat.2021.122731 ↗
13. Initial hydration of cementitious systems using a simple isothermal calorimeter and dynamic correction10.1023/A:1023374125778 ↗
14. A conduction calorimeter for measuring the heat of cement hydration in the initial hydration period10.1023/A:1012480828799 ↗
15. Characterization data of reference materials used for phase II of the priority program DFG SPP 2005 “Opus Fluidum Futurum – Rheology of reactive, multiscale, multiphase construction materials”10.1016/j.dib.2023.108902 ↗
16. Study of hydration potential and kinetics of the ferrite phase in iron-rich CAC10.1016/j.cemconres.2016.01.004 ↗
17. Investigation of the incompatibilities of cement and superplasticizers and their influence on the rheological behavior
18. Some factors affecting early hydration of alkali-slag cements10.1016/S0008-8846(96)85031-9 ↗
19. Measurement and prediction of heat of hydration of Portland cement using isothermal conduction calorimetry10.1520/JTE20120272 ↗
20. Kinetics of tricalcium silicate hydration in diluted suspensions by microcalorimetric measurements10.1111/j.1151-2916.1990.tb06455.x ↗
21. Mechanisms and parameters controlling the tricalcium aluminate reactivity in the presence of gypsum10.1016/j.cemconres.2007.06.001 ↗
22. Application of heat flow calorimetry to the study of oilwell cements10.1007/BF01979399 ↗
23. Induction period of hydration of tricalcium silicate10.1016/0008-8846(76)90126-5 ↗
24. Cement hydration mechanisms through time – a review10.1007/s10853-023-08651-9 ↗
25. Effect of mixing on the early hydration of alite and OPC systems10.1016/j.cemconres.2011.06.011 ↗
26. Effect of mixing on the generation of nanoparticles in cementitious materials
27. Impact of mixing on early hydration of cement paste with lignosulphonate
28. The isothermal heat conduction calorimeter: a versatile instrument for studying processes in physics, chemistry, and biology10.1021/ed078p1080 ↗
29. Calvet · 1963
30. Theory of calorimetry
31. Mentzer · 2024
32. Interpretation of calorimetric thermograms and their dynamic corrections