journal article·2026-06Open access

Development of cement-free strain-hardening slag composites: Impact of calcium hydroxide activation and dosage on microstructural and mechanical properties

Seong Yun Woo, Taekgeun Oh, Dongsun Lee, Nemkumar Banthia, Doo-Yeol Yoo

Abstract

This study evaluates the mechanical and environmental performance of strain-hardening slag composites (SHSCs) reinforced with polyethylene fibers. Ground granulated blast furnace slag (GGBFS) was activated with calcium hydroxide (Ca(OH)₂, CH), and silica fume was added to promote pozzolanic reactions. Mixtures containing up to 15% CH by weight of GGBFS were tested through chemical analyses, mechanical evaluations, digital image correlation, and life cycle assessment. Increasing CH dosage accelerated hydration, generating more reaction products and a denser silicate network. The mixture with 15% CH exhibited notable improvements in tensile performance including a tensile strength of 10.05 MPa, tensile strain capacity of 9.19%, and strain energy density of 664.9 kJ/m 3 , along with a clear pseudo-strain-hardening response. Environmentally, CH-activated SHSCs showed substantially lower CO₂ emissions and embodied energy than conventional strain-hardening cement composites and sodium-activated SHSCs. These findings highlight CH as an effective and sustainable activator for producing high-performance SHSCs with reduced environmental impact.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Microbial Applications in Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (97)

Show source-provided references
1. Challenges and opportunities in corrosion of steel in concrete10.1617/s11527-017-1131-6 ↗
2. Durability properties of micro-cracked ECC containing high volumes fly ash10.1016/j.cemconres.2009.07.009 ↗
3. Matrix design for pseudo-strain-hardening fibre reinforced cementitious composites10.1007/BF02473191 ↗
4. Theoretical and experimental exploration of roller-compacted engineered cementitious composites (ECC)10.1016/j.cemconcomp.2025.106157 ↗
5. Low-carbon, expansive engineered cementitious composites (ECC) in the context of 3D printing10.1016/j.cemconcomp.2024.105473 ↗
6. Tensile behavior simulation of ECC/SHCC at subzero temperatures based on a fiber/interface combination constitutive model10.1016/j.cemconcomp.2025.105969 ↗
7. Behaviour of Strain-hardening Cement-based Composites (SHCC) under monotonic and cyclic tensile loading: Part 1 – experimental investigations10.1016/j.cemconcomp.2010.07.019 ↗
8. Recent developments in Engineered/Strain-Hardening Cementitious Composites (ECC/SHCC) with high and ultra-high strength10.1016/j.conbuildmat.2022.127956 ↗
9. Performance of various strain-hardening cement-based composites (SHCC) subject to uniaxial impact tensile loading10.1016/j.cemconres.2017.08.008 ↗
10. Development of recycled strain-hardening cement-based composite (SHCC) for sustainable infrastructures10.1016/j.compositesb.2011.11.060 ↗
11. Flexural behavior of ultra-high-performance fiber-reinforced concrete beams reinforced with GFRP and steel rebars10.1016/j.engstruct.2015.12.003 ↗
12. Data-driven compressive strength prediction of steel fiber reinforced concrete (SFRC) subjected to elevated temperatures using stacked machine learning algorithms10.1016/j.jmrt.2022.10.153 ↗
13. Recent development of innovative steel fibers for ultra-high-performance concrete (UHPC): a critical review10.1016/j.cemconcomp.2023.105359 ↗
14. Active learning on stacked machine learning techniques for predicting compressive strength of alkali-activated ultra-high-performance concrete10.1007/s43452-024-01067-5 ↗
15. Transfer learning on stacked machine-learning model for predicting pull-out behavior of steel fibers from concrete10.1016/j.engappai.2025.111533 ↗
16. High-strength high-ductility Engineered/Strain-Hardening Geopolymer Composites (EGC/SHGC) incorporating dredged river sand
17. Recent advances in High-Strength Engineered Geopolymer Composites (HS-EGC): bridging sustainable construction and resilient infrastructure10.1016/j.cemconcomp.2025.106307 ↗
18. Ultra-High-Strength Engineered Geopolymer Composites (UHS-EGC) with mineral processing waste: probabilistic modeling of cracking behavior10.1016/j.tafmec.2025.105138 ↗
19. Upcycling red mud into high-strength high-ductility Engineered Geopolymer Composites (EGC): toward superior performance and sustainability10.1016/j.compositesb.2025.112713 ↗
20. Engineered cementitious composite and its applications10.1016/j.matpr.2020.03.743 ↗
21. Green and durable engineered cementitious composites (GD-ECC) with recycled PE fiber, desert sand, and carbonation curing: Mixture design, durability performance, and life-cycle analysis10.1016/j.conbuildmat.2024.134984 ↗
22. Sustainable high strength, high ductility engineered cementitious composites (ECC) with substitution of cement by rice husk ash10.1016/j.jclepro.2021.128379 ↗
23. Development of recycled strain-hardening cement-based composite (SHCC) for sustainable infrastructures10.1016/j.compositesb.2011.11.060 ↗
24. Greener strain-hardening cementitious composites (SHCC) with a novel alkali-activated cement10.1016/j.cemconcomp.2022.104735 ↗
25. Engineering characteristics, techno-economic feasibility and life cycle assessment of bio-fiber based green engineered cementitious composites
26. Eco-friendly strain-hardening cementitious composites with recycled PET fine aggregate: mechanical behavior and environmental benefits
27. Beneficial effect of recycled tire powder incorporation on the tensile performance of strain-hardening alkali-activated concrete10.1016/j.conbuildmat.2025.140115 ↗
28. Crack width control and mechanical properties of low carbon engineered cementitious composites (ECC)10.1016/j.conbuildmat.2022.128692 ↗
29. Carbon material-based thermoelectric ultra-high-performance alkali-activated concrete10.1016/j.compositesb.2025.112279 ↗
30. Effect of liquid crystal display glass powder to blast furnace slag ratio on the microstructure and mechanical properties of ultra-high-performance alkali-activated concrete10.1016/j.conbuildmat.2024.137755 ↗
31. Synergistic effects of steel fiber surface treatments on the tensile performance of cementless ultra-high-performance alkali-activated concrete10.1016/j.cemconcomp.2025.106207 ↗
32. Mechanisms of inorganic salts on Ca(OH)2-activated ground granulated blast-furnace slag curing under different temperatures10.1016/j.conbuildmat.2022.127637 ↗
33. Strength enhancement of CaO-activated slag system through addition of calcium formate as a new auxiliary activator10.1016/j.cemconcomp.2020.103572 ↗
34. Strength development and microstructural characteristics of barium hydroxide-activated ground granulated blast furnace slag10.1016/j.cemconcomp.2017.01.013 ↗
35. Hydration products of alkali activated slag cement10.1016/0008-8846(95)00045-E ↗
36. Optimization of fiber aspect ratio for 90 MPa strain-hardening geopolymer composites (SHGC) with a tensile strain capacity over 7.5%10.1016/j.cemconcomp.2023.105055 ↗
37. Strain-hardening alkali-activated fly ash/slag composites with ultra-high compressive strength and ultra-high tensile ductility10.1016/j.cemconres.2022.107075 ↗
38. Phase changes under efflorescence in alkali activated materials with mixed activators10.1016/j.conbuildmat.2021.122678 ↗
39. Mechanisms of efflorescence of alkali-activated slag10.1016/j.cemconcomp.2024.105811 ↗
40. Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete10.1016/j.conbuildmat.2013.01.023 ↗
41. Hydration products and strength development of calcium hydroxide-based alkali-activated slag mortars10.1016/j.conbuildmat.2011.10.063 ↗
42. Calcination-free production of calcium hydroxide at sub-boiling temperatures10.1039/D0RA08449B ↗
43. Alkali-activated cements and concretes
44. Utilization of CaO to accelerate the pozzolanic reaction of excessive silica fume in ultra-high-performance fiber-reinforced concrete: Implications for microstructural and mechanical properties10.1016/j.compositesb.2025.112949 ↗
45. Stabilization of soft soil by a sustainable binder comprises ground granulated blast slag (GGBS) and cement kiln dust (CKD)10.3390/recycling8010010 ↗
46. Pore solution chemistry of alkali-activated ground granulated blast-furnace slag10.1016/S0008-8846(98)00212-9 ↗
47. Effect of silica fume on mechanical properties of high-strength concrete10.1016/S0958-9465(03)00017-9 ↗
48. Combined effect of silica fume and steel fiber on the mechanical properties of high strength concretes10.1016/j.conbuildmat.2007.04.017 ↗
49. Enhancement of energy absorption capacity of polyethylene fiber-reinforced cementitious composites according to admixtures and curing conditions10.9798/KOSHAM.2020.20.1.319 ↗
50. Composite properties of calcium-based alkali-activated slag composites reinforced by different types of polyethylene fibers and micromechanical analysis
51. Engineered/strain-hardening cementitious composites (ECC/SHCC) with an ultra-high compressive strength over 210 MPa10.1016/j.coco.2021.100775 ↗
52. High-performance strain-hardening cementitious composites with tensile strain capacity exceeding 4%: a review10.1016/j.cemconcomp.2021.104325 ↗
53. Ex situ leaching measurement of concrete alkalinity10.1016/j.cemconres.2004.04.024 ↗
54. The pH measurement of cement-based materials: Effect of leaching time, leaching technique and water-to-solid ratio10.1016/j.conbuildmat.2023.134525 ↗
55. Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) n.d. doi:https://doi.org/10.1520/C0109_C0109M.10.1520/C0109_C0109M ↗
56. 2008
57. Effects of different nanomaterials on the early performance of ultra-high performance concrete (UHPC): C–S–H seeds and nano-silica10.1016/j.cemconcomp.2023.105211 ↗
58. Influence of activator composition on the chloride binding capacity of alkali-activated slag10.1016/j.cemconcomp.2019.103368 ↗
59. A study of thermal decomposition of phases in cementitious systems using HT-XRD and TG10.1016/j.conbuildmat.2018.03.001 ↗
60. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag — part II: effect of Al2O310.1016/j.cemconres.2011.08.005 ↗
61. Pore solution chemistry of alkali-activated ground granulated blast-furnace slag10.1016/S0008-8846(98)00212-9 ↗
62. Influence of the Ca/Si ratio on the compressive strength of cementitious calcium–silicate–hydrate binders10.1039/C7TA06104H ↗
63. Song S, Sohn D, Jennings HM, Mason, T.O. Hydration of Alkali-activated Ground Granulated Blast Furnace Slag. n.d.
64. Effect of temperature and pH on early hydration rate and apparent activation energy of alkali-activated slag
65. Hydration characteristics and microstructure of alkali-activated slag concrete: a review10.1016/j.eng.2021.07.026 ↗
66. Nanosilica effects on composition and silicate polymerization in hardened cement paste cured under high temperature and pressure10.1016/j.cemconcomp.2013.07.002 ↗
67. The role of Al in cross-linking of alkali-activated slag cements10.1111/jace.13360 ↗
68. Effect of alkali hydroxide on calcium silicate hydrate (C-S-H)10.1016/j.cemconres.2021.106636 ↗
69. Nanosilica effects on composition and silicate polymerization in hardened cement paste cured under high temperature and pressure10.1016/j.cemconcomp.2013.07.002 ↗
70. 29Si and 27Al NMR study of alkali-activated slag10.1016/S0008-8846(02)01044-X ↗
71. 29Si and 27Al high-resolution NMR characterization of calcium silicate hydrate phases in activated blast-furnace slag pastes10.1016/S0008-8846(01)00530-0 ↗
72. Effect of slag chemistry on the hydration of alkali-activated blast-furnace slag10.1617/s11527-014-0461-x ↗
73. Hydration degree of alkali-activated slags: a 29Si NMR study10.1111/j.1551-2916.2011.04828.x ↗
74. Generalized structural description of calcium-sodium aluminosilicate hydrate gels: the cross-linked substituted tobermorite model10.1021/la4000473 ↗
75. Silicate chain formation in the nanostructure of cement-based materials10.1063/1.2796171 ↗
76. Insight on the mechanical properties of hierarchical porous calcium-silicate-hydrate pastes according to the Ca/Si molar ratio using in-situ synchrotron X-ray scattering and nanoindentation test10.1016/j.conbuildmat.2022.130034 ↗
77. Effect of conductive surface-coated polyethylene fiber on the electrical and mechanical properties of high-performance fiber-reinforced cementitious composites10.1016/j.conbuildmat.2024.135892 ↗
78. The effect of fiber content on the static and dynamic performance of PE-ECC
79. Fiber alignment and its effect on mechanical properties of UHPC: an overview10.1016/j.conbuildmat.2021.123741 ↗
80. Effects of polyethylene fiber dosage and length on the properties of high-tensile-strength engineered geopolymer composite10.1061/JMCEE7.MTENG-14763 ↗
81. Enhancement of reactivity of calcium hydroxide-activated slag mortars by the addition of barium hydroxide10.1016/j.conbuildmat.2009.09.001 ↗
82. Strain-hardening fiber cement optimization and component tailoring by means of a micromechanical model10.1016/j.conbuildmat.2007.05.014 ↗
83. Engineered Cementitious Composites (ECC): bendable concrete for sustainable and resilient infrastructure
84. Composite properties of high-strength, high-ductility concrete
85. Ranadep · 2011
86. ASTM_A615_A615M-20 n.d.
87. Prediction of the tensile strength of normal and steel fiber reinforced concrete exposed to high temperatures10.1186/s40069-021-00485-6 ↗
88. Rubber particle bridging effect on crack width control of low carbon Engineered Cementitious Composites (ECC)10.1016/j.cemconcomp.2023.105106 ↗
89. Engineered/strain-hardening cementitious composites (ECC/SHCC) with an ultra-high compressive strength over 210 MPa10.1016/j.coco.2021.100775 ↗
90. Eco-mechanical index for structural concrete10.1016/j.conbuildmat.2013.12.090 ↗
91. Utilization of off-specification fly ash in preparing ultra-high-performance concrete (UHPC): mixture design, characterization, and life-cycle assessment10.1016/j.resconrec.2021.106136 ↗
92. Sustainable reinforced concrete design: the role of ultra-high performance concrete (UHPC) in life-cycle structural performance and environmental impacts10.1016/j.engstruct.2024.118585 ↗
93. Country-specific carbon footprint and cumulative energy demand of metallurgical grade silicon production for silicon photovoltaics10.1016/j.resconrec.2022.106171 ↗
94. Assessment of embodied energy in the production of Ultra High Performance Concrete (UHPC)
95. Autogenous healing of engineered cementitious composites under wet–dry cycles10.1016/j.cemconres.2009.01.013 ↗
96. Quantification of crack-healing in novel bacteria-based self-healing concrete10.1016/j.cemconcomp.2011.03.012 ↗
97. Autogenous healing of engineered cementitious composites at early age10.1016/j.cemconres.2010.11.002 ↗