journal article·2025-10Open access

Impact of the slaking method on the mineralogy of natural hydraulic limes and its effects on mortar mechanical properties

Clara Parra-Fernández, Anna Arizzi

Abstract

The influence of slaking on the properties of natural hydraulic limes (NHL) has been little studied so far. Laboratory-manufactured limes have been produced to investigate the mineralogical changes that occur during the slaking process. Two different hydration methods have been compared: conventional slaking, by adding water in a 1:1 water:CaO ratio, and passive slaking, by exposure of the quicklimes to a relative humidity of 60 ± 5 % and 80 ± 5 % RH. The mineralogical evolution of limes was monitored under different slaking conditions using the X-ray diffraction Quantitative Phase Analysis. The resulting NHLs have been used to produce mortars, to assess the influence of the slaking conditions on their mechanical strength . The results show that passive slaking at relative humidities higher than 60 % ensures complete transformation of CaO into Ca(OH) 2 , and gives place to natural hydraulic limes with comparable, or even slightly improved properties to those conventionally slaked.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Building materials and conservation · Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Boynton, R. S. Chemistry and technology of lime and limestone. second ed.. John Wiley and Sons, Inc., New York, 1980.
2. Effect of temperature and time of burning upon the properties of high-calcium lime10.1021/ie50220a030 ↗
3. The effects of limestone characteristics and calcination temperature to the reactivity of the quicklime10.1016/S0008-8846(00)00490-7 ↗
4. Lime reactivity and overburning: the case of limestones belonging to Tuscan nappe sequence (NW Tuscany, Italy)10.1007/s10973-024-13484-y ↗
5. Determination of optimal burning temperature ranges for production of natural hydraulic limes10.1016/j.conbuildmat.2014.06.015 ↗
6. The manufacture of natural hydraulic limes: influence of raw materials’ composition, calcination and slaking in the crystal-chemical properties of binders10.1016/j.cemconres.2024.107631 ↗
7. Experimental study of calcination-carbonation process for the production of precipitated calcium carbonate
8. D.Carran, J.Hughes, A.Leslie, C.Kennedy. The effect of calcination time upon the slaking properties of quicklime. J.Válek, J.Hughes, C.J.W.P.Groot (Eds.), Historic mortars: characterisation, assessment and repair, RILEM Bookseries, vol 7, Springer, Dordrecht, Netherlands (2012) 283–295. https://doi.org/10.1007/978-94-007-4635-0_22.10.1007/978-94-007-4635-0_22 ↗
9. Effect of the textures and particle sizes of limestone on the quicklime reaction activity10.3390/min13091201 ↗
10. Impact of rock fabric, thermal behavior, and carbonate decomposition kinetics on quicklime industrial production and slaking reactivity10.1007/s10973-018-7769-7 ↗
11. Reactivity and overburning tendency of quicklime burnt at high temperature
12. The micro-structural character of limestone and its influence on the formation of phases in calcined products: natural hydraulic limes and cements
13. Characterization and provenance of carbonate rocks for quicklime and Dololime production in twin-shaft regenerative kilns from the Arabian peninsula and neighboring countries10.3390/min13121500 ↗
14. A comparative study of the physicochemical properties of mg-rich and ca-rich quicklimes and their effect on reactivity10.1617/s11527-014-0436-y ↗
15. Reactivity of laboratory and industrial limes10.1205/cherd06200 ↗
16. Artioli, G., Secco, M., Addis, A. The Vitruvian legacy: Mortars and binders before and after the Roman world. Artioli, G., Oberti, R. (Eds.). The contribution of mineralogy to cultural heritage, EMU Notes, 20 (2019) 151–202. https://doi.org/10.1180/EMU-notes.20.4.10.1180/EMU-notes.20.4 ↗
17. Lime mortars for the conservation of historic buildings10.1179/sic.2002.47.1.62 ↗
18. 2021
19. Standard test methods for chemical analysis of limestone, quicklime, and hydrated lime
20. Proposed modifications to the method for the determination of available lime10.1016/S0892-6875(01)00039-5 ↗
21. Oates · 1998
22. An empirical study of factors influencing lime slaking. Part I: production and storage conditions10.1016/S0892-6875(02)00008-0 ↗
23. The influence of particle size and structure in hydrated lime on the properties of the lime putty and lime mortar10.1080/15583050902822681 ↗
24. Slaking lime for restoration and conservation of historical buildings and materials, criticism of an Arabic historical manuscript
25. Preliminary study on wind slaked lime used before Qing dynasty in China
26. Crystallization of calcium hydroxide from aqueous solution. A preliminary study10.1016/0022-0248(86)90047-3 ↗
27. Calcium hydroxide crystal evolution upon aging of lime putty10.1111/j.1151-2916.1998.tb02735.x ↗
28. Aging of lime putty: effects on traditional lime mortar carbonation10.1111/j.1151-2916.2000.tb01332.x ↗
29. Effects of ageing on lime putty
30. The maturation time factor on the lime putty quality
31. Factors influencing the reactivity of quicklime
32. Aging mechanism of quicklime and application study of aged lime in conservation of cultural relics
33. An approach for a rapid determination of the aging time of lime putty10.1016/j.tca.2016.12.012 ↗
34. The influence of relative humidity on structural and chemical changes during carbonation of hydraulic lime10.1016/j.cemconres.2007.05.002 ↗
35. Competition between hydration and carbonation in hydraulic lime and lime-pozzolana mortars10.4028/www.scientific.net/AMR.133-134.241 ↗
36. Effect of water binder ratio on the early hydration of natural hydraulic lime10.1617/s11527-014-0410-8 ↗
37. Mechanical properties of natural hydraulic lime-based mortars10.1016/j.cemconres.2004.02.005 ↗
38. Comparative study on the properties of three hydraulic lime mortar systems: natural hydraulic lime mortar, cement-aerial lime-based mortar and slag-aerial lime-based mortar10.1016/j.conbuildmat.2018.07.053 ↗
39. A comparison of standard and realistic curing conditions of natural hydraulic lime repointing mortar for damp masonry: impact on laboratory evaluation10.1016/j.culher.2018.11.011 ↗
40. RILEM TC 277-LHS report: lime-based mortars for restoration–a review on long-term durability aspects and experience from practice10.1617/s11527-022-02052-1 ↗
41. Kozlovcev · 2017 · 18684
42. The source materials for lime production in the Monte Pisano area (NW Tuscany, Italy)
43. Eckel · 1922
44. Cowper · 1927 · 14
45. Holmes · 1997 · 12-14
46. Banfill · 2000
47. Characteristics of lime produced from limestone containing diatoms10.1016/j.conbuildmat.2006.12.010 ↗
48. Elsen, J., Mertens, G., Snellings, R. Portland cement and other calcareous hydraulic binders: History, production and mineralogy. Christidis, G.E.. Advances in the characterization of industrial minerals. European Mineralogical Union Notes in Mineralogy, 9. London: London, 2010, pp. 441–479. https://doi.org/10.1180/EMU-notes.9.11.10.1180/emu-notes.2010.emu9-11 ↗
49. J.Elsen, VanK.Balen, G.Mertens. Hydraulicity in historic lime mortars: A review, in: J.Válek, J.J.Hughes, C.J.W.P.Groot (Eds.), Historic mortars, RILEM Bookseries, Springer Netherlands, 2012, pp. 125–139. https://doi.org/10.1007/978-94-007-4635-0_10.10.1007/978-94-007-4635-0_10 ↗
50. Devonian micritic limestones used in the historic production of Prague hydraulic lime (’pasta di Praga’): characterization of the raw material and experimental laboratory burning10.3989/mc.2015.06314 ↗
51. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
52. 2016
53. EN 1015-6. · 1998
54. EN 1015-3. · 1999
55. 2019
56. 2019
57. 2015
58. Effects of clay type and component fineness on the hydration and properties of limestone calcined clay cement10.1617/s11527-024-02461-4 ↗
59. Effects of kaolinite and montmorillonite calcined clays on the sulfate balance, early hydration, and artificial pore solution of limestone calcined clay cements (LC3)10.1617/s11527-024-02462-3 ↗
60. Compositional characteristics and experimental burning of selected lower Palaeozoic limestones from the Prague Basin (Barrandian area, Czech Republic) suitable for the production of natural hydraulic lime10.1007/s10064-016-0882-6 ↗
61. Carbonatation of ca(OH)₂ investigated by thermal and X-ray diffraction methods of analysis10.1002/jctb.5010170701 ↗
62. Structural prereactional transformations in ca(OH)₂10.1016/0022-4596(87)90358-6 ↗
63. Quantitative phase analysis of hydraulic limes using the Rietveld method10.1016/j.cemconres.2005.02.001 ↗
64. Full quantitative phase analysis of hydrated lime using the Rietveld method10.1016/j.cemconres.2012.05.016 ↗
65. The mechanism of vapor phase hydration of calcium oxide: implications for CO₂ capture10.1021/es5034662 ↗
66. Nonclassical crystallization of calcium hydroxide via amorphous precursors and the role of additives10.1021/acs.cgd.0c00241 ↗
67. The determination of calcium hydroxide in set Portland cements10.1016/0008-8846(79)90097-8 ↗
68. Hydration of tricalcium silicate in the presence of lignosulfonates, glucose, and sodium gluconate10.1111/j.1151-2916.1979.tb19068.x ↗
69. Full phase analysis of Portland clinker by penetrating synchrotron powder diffraction10.1021/ac0006674 ↗
70. On-line X-ray diffraction for quantitative phase analysis: application in the Portland cement industry10.1154/1.1359796 ↗
71. Vola · 2019
72. Influence of natural water composition on reactivity of quicklime derived from ca-rich and mg-rich limestone: implications for sustainability of lime manufacturing through geochemical modeling10.1039/C6RA11346J ↗
73. Reactivity of limestones from different sources in Turkey10.1016/j.mineng.2003.10.009 ↗
74. Fast back-reactions of shock-released CO₂ from carbonates: an experimental approach10.1016/S0016-7037(01)00617-2 ↗
75. Mumme · Neues Mineral. · 1995 · 169 · 35
76. Impact of α-C₂SH calcination temperature on the mineral composition and heat flow of the products10.1007/s10973-018-7548-5 ↗
77. Tricalcium silicate ca₃O[SiO₄]: the monoclinic superstructure
78. Nineteenth century hydraulic restoration mortars in the Saint Michael’s church (Leuven, Belgium): natural hydraulic lime or cement?10.1016/S0008-8846(00)00499-3 ↗
79. The crystal structure of tricalcium aluminate, ca₃Al₂O₆10.1107/S0567740875003639 ↗
80. The crystal structure of brownmillerite, ca₂FeAlO₅10.1107/S056774087100579X ↗
81. Properties and composition of bredigite-structured phases10.1007/BF00543911 ↗
82. Effect of hydration degrees on the accelerated carbonization (3% CO₂) behavior of natural hydraulic lime10.1016/j.conbuildmat.2024.137297 ↗
83. Blast furnace slags as sorbents of phosphate from water solutions10.1016/j.watres.2005.03.010 ↗
84. The nature and paragenesis of natural bredigite and associated minerals from Carneal and Scawt Hill, Co. Antrim10.1180/minmag.1985.049.354.05 ↗
85. Physico-chemical, mechanical and antibacterial properties of the boron modified biphasic larnite/bredigite cements for potential use in dentistry10.1016/j.ceramint.2022.10.119 ↗
86. Using gypsum to control hydration kinetics of CSA cements10.1016/j.conbuildmat.2017.07.217 ↗
87. Formation and stability of crystallohydrates in the non-equilibrium system during hydration of SAB cements
88. Mechanism of nanostructure bredigite formation by mechanical activation with thermal treatment10.1016/j.matlet.2011.04.108 ↗
89. Synthesis, characterization and formation mechanism of single-phase nanostructure bredigite powder10.1016/j.msec.2011.10.007 ↗
90. Influence of water vapour and carbon dioxide on free lime during storage at 80 °C, studied by raman spectroscopy10.1016/j.saa.2013.04.033 ↗
91. The effect of ultrasonic energy on lime slaking10.1016/S0892-6875(03)00173-0 ↗
92. IMA-CNMNC approved mineral symbols10.1180/mgm.2021.43 ↗
93. Dolomitic limes: evolution of the slaking process under different conditions10.1016/j.tca.2004.04.016 ↗
94. Synthesis and characterization of hydrogarnet Ca3(AlxFe1−x)2(SiO4)y(OH)4(3−y)10.1016/j.cemconres.2014.02.001 ↗
95. The role of calcium carbonate in cement hydration10.1016/j.cemconres.2006.10.013 ↗
96. Mortars and plasters—how to characterise hydraulic mortars10.1007/s12520-021-01404-2 ↗
97. Thermodynamic investigation of the CaO-Al2O3-CaCO3-H2O closed system at 25 °C and the influence of Na2O10.1016/0008-8846(94)90145-7 ↗
98. Carboaluminate phases formation during the hydration of calcite-containing Portland cement10.1111/j.1551-2916.2010.04201.x ↗
99. Crystal structures and phase transition of cementitious bi-anionic AFm-(cl−, CO32−) compounds10.1111/j.1551-2916.2010.04050.x ↗
100. Hydration states of AFm cement phases10.1016/j.cemconres.2015.02.011 ↗