Impedance spectra of fiber-reinforced cement-based composites: a modeling approach
Source abstract
Abstract
The impedance response of conductive fiber-reinforced cement-based materials was investigated using model systems (physical simulations) consisting of conducting needles in aqueous solutions. Two discrete bulk arcs are observed in the Nyquist plots for fiber-reinforced samples, while only a single bulk arc was observed for samples without fibers. This difference is attributable to thin, resistive, and highly capacitive layers (e.g., oxide film or polarization/double layers) which reside on the surfaces of the conducting fibers. These layers fully insulate the fibers at low frequencies (near DC), so that the highly conducting fibers behave as if they were insulating fibers. At intermediate frequencies, these layers short out, so that the fibers act as highly conducting elements in the microstructure. Spreading resistance effects from the ends of the fibers play an important role in the high frequency behavior. Pixel-based computer modeling results are presented to rationalize both DC and high frequency behavior. Experimental and modeling results are used to develop an equivalent circuit model containing a frequency-switchable fiber coating element.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Concrete Corrosion and Durability · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Concrete as a new strain–stress sensor10.1016/1359-8368(95)00002-X ↗
2. Contact electrical resistivity between cement and carbon fiber: Its decrease with increasing bond strength and its increase during fiber pull-out10.1016/0008-8846(95)00132-V ↗
3. Self-monitoring of fatigue damage in carbon fiber reinforced cement10.1016/0008-8846(95)00184-0 ↗
4. Self-monitoring in carbon fiber reinforced mortar by reactance measurement10.1016/S0008-8846(97)83277-2 ↗
5. Self-monitoring structural materials10.1016/S0927-796X(97)00021-1 ↗
6. Electromechanical study of carbon fiber composites10.1557/JMR.1998.0420 ↗
7. Electrical resistivity of carbon and steel micro-fiber reinforced cements10.1016/0008-8846(92)90104-4 ↗
8. An A.C. impedance spectroscopy study of micro-cracking in cement-based composites during compressive loading10.1016/0008-8846(93)90018-5 ↗
9. Electrical percolation phenomena in cement composites containing conductive fibres10.1007/BF00352673 ↗
10. Assignment of features in impedance spectra of the cement-paste/steel system10.1016/S0008-8846(98)00156-2 ↗
11. Impedance measurements on cement paste10.1007/BF00720825 ↗
12. Impedance spectra of hydrating cement pastes10.1007/BF00576526 ↗
13. Application of A.C. impedance techniques in studies of porous cementitious materials I10.1016/0008-8846(93)90003-R ↗
14. Application of A.C. impedance techniques in studies of porous cementitious materials II10.1016/0008-8846(93)90003-R ↗
15. Application of A.C. impedance techniques in studies of porous cementitious materials III10.1016/0008-8846(93)90003-R ↗
16. Impedance spectroscopy of hydrating cement-based materials: Measurement, interpretation, and application10.1111/j.1151-2916.1994.tb04507.x ↗
17. Boukamp · 1990
18. E.J. Garboczi, Finite element and finite difference programs for computing the linear electric and elastic properties of digital images of random materials, NIST Internal Report 6269, 1998. Also available at http://ciks.cbt.nist.gov/garboczi/, Chap. 2.10.6028/NIST.IR.6269 ↗
19. Intrinsic viscosity and the polarizability of particles having a wide range of shapes
20. Intrinsic conductivity of objects having arbitrary shape and conductivity10.1103/PhysRevE.53.6169 ↗
21. Analysis of composite materials — a survey10.1115/1.3167081 ↗
22. Modeling the influence of the interfacial zone on the DC electrical conductivity of mortar10.1016/1065-7355(95)90001-2 ↗