journal article·2008-03

Bonding and abrasion resistance of geopolymeric repair material made with steel slag

Shuguang Hu, Hongxi Wang, Gaozhan Zhang, Qingjun Ding

Cement and Concrete Composites· Volume 30· Issue 3
Publisher page

Abstract

Three repair materials were prepared using cement-based, geopolymeric, or geopolymeric containing steel slag binders. Their mechanical performances such as compressive strength, bond strength and abrasion resistance were examined experimentally. The test results showed that the geopolymeric materials had better repair characteristics than cement-based repair materials, and the addition of steel slag could improve significantly the abrasion resistance of geopolymeric repair. By means of scanning electron microscopy (SEM) it can also be concluded that the steel slag was almost fully absorbed to take part in the alkali-activated reaction and be immobilized into the amorphous aluminosilicate geopolymer matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Geopolymers and geopolymeric new materials10.1007/BF01904446 ↗
2. Physical chemistry basis for the formation of alkaline cementitious material
3. The characterisation of source materials in fly ash based geopolymers10.1016/S0167-577X(02)00971-0 ↗
4. Effect of silicate activator pH on the leaching and material characteristics of waste-based geopolymers10.1016/S0892-6875(01)00002-4 ↗
5. The geopolymerisation of alumino-silicate minerals10.1016/S0301-7516(99)00074-5 ↗
6. Davidovits J. Method for bonding fiber reinforcement on concrete and steel structures and resultant products, US Patent No. 5925449; 1999.
7. Research on excitation principle of sodium silicate to steel slag cement
8. Influence of hydrochloric acid etching on bond strength between concrete substrate and repair materials10.1016/S0958-9465(02)00123-3 ↗
9. Performance characteristics of high-volume class F fly ash concrete10.1016/j.cemconres.2003.09.002 ↗