Strength and durability of lightweight concrete
Source abstract
Abstract
Two lightweight aggregate concretes, SLWC35 and SLWC50, of 35 and 50 MPa 28 day cube compressive strength were cast. The concrete specimens made with lightweight coarse aggregates and a dune sand were continuously cured in water for one or 7 days and then exposed to predominantly hot and humid seaside ambient conditions containing air-borne salts. After 7 days of initial curing and on subsequent exposure to hot and humid air both SLWCs attained an almost similar strength to those continuously water cured cubes at an age of 12 months. In contrast, the water penetrability of SLWC35 and SLWC50 after 7 days of initial curing and subsequent exposure to the sea side was about 2 and 1.8 times the water penetration of those slabs which were water cured for the entire duration of 12 months. However, the depth of carbonation of the two sand lightweight concretes up to an age of 12 months were negligibly small. The results suggest that compressive strength is comparatively less sensitive to the curing regimes investigated. Both the chloride and sulphate penetration after 12 months exposure were found to be within tolerable limits. Also replacement of lightweight fine aggregate with normal weight sand produces a concrete that is somewhat more durable as indicated by their water penetrability and depth of carbonation when concretes are of equal strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Effect of curing on concrete in hot exposure conditions10.1680/macr.1999.51.4.269 ↗
2. Strength and durability of lightweight and normal weight concrete
3. Strength and durability of lightweight concrete in hot marine exposure conditions10.1007/BF02481638 ↗
4. Status of SLWC in Australia as the new millennium dawns
5. Structural lightweight aggregate concrete––the future?
6. Lightweight concrete in hot coastal areas10.1016/S0958-9465(99)00035-9 ↗
7. Adjusted density concrete
8. British Standard Institution, Part 120––determination of core cube strength, BS 8110, BSI, London, 1996
9. British Standard Institution, Part 124––testing concrete. Methods for analysis of hardened concrete, BS 8110, BSI, London, 1996
10. German Standard, DIN 1048––test methods of concrete impermeability to water: Part 2, Deutscher Institute Fur Normung, Germany
11. A review of prestressed lightweight concrete in the UK
12. Permeability of high-strength lightweight concrete
13. The properties of high strength lightweight concrete
14. Kayali OA, Haque MN. A new generation of structural lightweight concrete, ACI, SP-171, 1997, pp. 568–88
15. Effect of initial curing on early strength and physical properties of lightweight concrete10.1016/S0008-8846(98)00051-9 ↗
16. Permeability and sorption properties of mature near-surface concrete10.1061/(ASCE)0899-1561(1998)10:1(21) ↗
17. Osborne GJ. The durability of lightweight aggregate concretes after 10 years in marine and acid water environments. In: Int. Symp. on Structural Lightweight Aggregate Concrete, Norway, 1995, pp. 591–603
18. The performance of lightweight aggregate concrete structures in service
19. American Concrete Institute, Building Code/Commentary, 318/318R, 1996
20. Standard Australia, AS3600––concrete structures, 2001, p. 154