Early-age hydration of accelerated low-carbon cements for digital fabrication
Source abstract
Abstract
Digital fabrication processes with concrete offer several advantages compared to conventional processes, however, a major criticism with related concrete mixes has been with regard to their high cement paste content and consequent carbon footprint. One of the ways to address this is to reduce ordinary Portland cement (OPC) content in such mixes by using supplementary cementitious materials. This paper reports on such an approach for two different digital fabrication methods: digital casting system and 3D concrete printing. Results focus on the combined use of such low carbon blends with a calcium aluminate cement (CAC) based accelerator. Two such accelerators were studied: one being mainly crystalline based and the other mainly amorphous. Their performance is assessed at different temperatures. It is concluded that crystalline CAC is more suitable for applications above 20 °C while at temperature below 20 °C, amorphous CAC should be preferred. This paper also delves deeper into the effect of amorphous CAC on the hydration of tricalcium silicate present in OPC. It shows that the effect of amorphous CAC on that silicate depends on the OPC content of the system as well as on the type and amount of calcium sulfate used in the accelerator formulation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Concrete and Cement Materials Research · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Economist · 2012
2. 3D printing using concrete extrusion: a roadmap for research10.1016/j.cemconres.2018.05.006 ↗
3. 3-D printing of concrete: beyond horizons10.1016/j.cemconres.2020.106070 ↗
4. Digital concrete: opportunities and challenges10.21809/rilemtechlett.2016.16 ↗
5. Concrete material science: past, present, and future innovations10.1016/j.cemconres.2018.05.002 ↗
6. A process classification framework for defining and describing Digital Fabrication with Concrete10.1016/j.cemconres.2020.106068 ↗
7. Rheological requirements for printable concretes10.1016/j.cemconres.2018.04.005 ↗
8. Automated construction by contour crafting—related robotics and information technologies10.1016/j.autcon.2003.08.012 ↗
9. Vision of 3D printing with concrete — technical, economic and environmental potentials10.1016/j.cemconres.2018.06.001 ↗
10. Complex concrete structures: merging existing casting techniques with digital fabrication10.1016/j.cad.2014.02.011 ↗
11. Smart dynamic casting: slipforming with flexible formwork-inline measurement and control
12. Additive digital casting: from lab to industry10.3390/ma15103468 ↗
13. Eggshell: ultra-thin three-dimensional printed formwork for concrete structures10.1089/3dp.2019.0197 ↗
14. Hydration and rheology control of concrete for digital fabrication: potential admixtures and cement chemistry10.1016/j.cemconres.2018.05.014 ↗
15. The role of early age structural build-up in digital fabrication with concrete10.1016/j.cemconres.2018.05.011 ↗
16. Setting on demand for digital concrete- principles, measurements, chemistry, validation10.1016/j.cemconres.2020.106047 ↗
17. Das · 2022
18. Hydration control of ternary cements for digital fabrication with concrete
19. Early-age rheology and hydration control of ternary binders for 3D printing applications10.1016/j.cemconres.2022.107004 ↗
20. Microstructural characterization of 3D printed cementitious materials10.3390/ma12182993 ↗
21. Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars10.1016/j.conbuildmat.2017.09.109 ↗
22. Impact of calcium sulfoaluminate cement on printability and early strength development of a slag-based 3D printing cementitious material10.1016/j.conbuildmat.2023.133249 ↗
23. A chemical process engineering look at digital concrete processes: critical step design, inline mixing, and scaleup10.1016/j.cemconres.2022.106782 ↗
24. On sustainability and digital fabrication with concrete10.1016/j.cemconres.2022.106837 ↗
25. Formulation of low clinker blended cements and concrete with enhanced fresh and hardened properties10.1016/j.cemconres.2021.106605 ↗
26. Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture10.1016/j.cemconres.2020.106040 ↗
27. Sustainable 3D concrete printing with large aggregates
28. Optimization of 3D printing concrete with coarse aggregate via proper mix design and printing process
29. Study on preparation and mechanical properties of 3D printed concrete with different aggregate combinations
30. Aluminate 2K systems in Digital Concrete: process, design, chemistry and outlook10.1016/j.cemconres.2024.107644 ↗
31. Scaling up in Digital Casting of concrete: towards industry integration
32. 8 - viscosity-enhancing admixtures and the rheology of concrete
33. Effect of viscosity-enhancing admixtures on formwork pressure and thixotropy of self-consolidating concrete
34. Assessment of thixotropy of flowable and self-consolidating concrete
35. Das A, Bousseau JN, Maach N, Flatt RJ. Effect of temperature on performance of calcium aluminate cement based accelerator. In: Further Reduction of CO2-Emissions and Circularity in the Cement and Concrete Industry, 16th International Congress on the Chemistry of Cement 2023-ICCC2023. Vol vol. 4. Thailand Concrete Association.
36. Interactions between alite and C3A-gypsum hydrations in model cements10.1016/j.cemconres.2012.10.018 ↗
37. Use of micro-reactors to obtain new insights into the factors influencing tricalcium silicate dissolution10.1016/j.cemconres.2015.07.011 ↗
38. Influence of aluminates on the hydration kinetics of tricalcium silicate10.1016/j.cemconres.2017.06.006 ↗
39. The influence of aluminium on the dissolution of amorphous silica and its relation to alkali silica reaction10.1016/j.cemconres.2012.09.009 ↗
40. The effect of Al(OH)4− on the dissolution rate of quartz10.1016/j.gca.2005.09.017 ↗
41. Hydration of alite containing aluminium10.1179/1743676110Y.0000000007 ↗
42. Gawlicki · 2009
43. Early hydration of ordinary Portland cement with an alkaline shotcrete accelerator10.1680/adcr.2005.17.1.1 ↗
44. Conduction calorimetric studies of ternary binders based on Portland cement, calcium aluminate cement and calcium sulphate10.1007/s10973-013-3003-9 ↗
45. Calorimetric study on the influence of calcium sulfate on the hydration of Portland cement–calcium aluminate cement mixtures10.1007/s10973-011-1920-z ↗
46. Bizzozero J. Hydration and dimensional stability of calcium aluminate cement based systems. Infoscience. doi:10.5075/epfl-thesis-6336.
47. Expansion mechanisms in calcium aluminate and sulfoaluminate systems with calcium sulfate10.1016/j.cemconres.2013.11.011 ↗
48. Distinguishing flocculation and hydration effects on the thixotropy of cement pastes
49. Early-age hydration mechanism of ternary binders: quantitative relation between microstructure evolution and strength build-up10.1016/j.cemconres.2023.107191 ↗
50. Ettringite accelerator in portland cement dominated systems: a comparison of different calcium aluminate technologies
51. El Housseini · 2022
52. Thermodynamic modelling of the effect of temperature on the hydration and porosity of Portland cement10.1016/j.cemconres.2007.08.017 ↗