journal article·2022-11Open access

Hot deformation behavior, microstructure evolution and slip system of Mg-2Zn-0.5Mn-0.2Ca alloy

Deqing Ma, Shuai Yuan, Shiyu Luan, Peipeng Jin, Hengrui Hu, Jinhui Wang, Xiaoqiang Li

Abstract

The hot deformation behavior of as-cast Mg-2Zn-0.5Mn-0.2Ca alloys was investigated by hot compression tests conducted at 250–400 °C with strain rates of 0.001–1 s−1. The true stress–strain curves showed that flow stress increased with the increase of strain rates and decrease of temperatures. The constitutive equation was obtained, and the calculated average activation energy is 196.79 kJ mol−1. The processing map is developed. Combined with the analyses of microstructural and processing map, the optimal processing parameter is determined at 350 °C and 0.001–0.1 s−1. Based on EBSD analysis, the microstructures of the instability areas and the stable areas are quite different, yet both have a <0001>//CD texture. The slip system in deformed grains was determined by the in-grain misorientation axis (IGMA) analysis. Typical discontinuous dynamic recrystallization (DDRX) mechanism is the main dynamic recrystallization (DRX) mechanism. As the decrease of the strain rates and the increase of the deformation temperatures, the DRX fraction gradually increased, meanwhile, the behavior of DRX has an obvious weakening effect on texture strength.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Enhanced mechanical properties of Mg-1Al-12Y alloy containing long period stacking ordered phase
2. Microstructure and mechanical properties of Mg-Zn-Ca-Zr alloy fabricated by hot extrusion-shearing process
3. Drag effects of solute and second phase distributions on the grain growth kinetics of pre-extruded Mg-6Zn alloy10.1016/j.jmst.2016.06.025 ↗
4. Effect of Sb additions on the microstructural stability and mechanical properties of cast Mg-4Zn alloy10.1016/j.msea.2010.05.029 ↗
5. Development of microstructure in cast Mg-AI-rare earth alloys10.1179/mst.1996.12.9.741 ↗
6. Study on Fe reduction in AZ91 melt by B2O310.1016/j.msea.2003.11.017 ↗
7. Toward a recrystallized microstructure in extruded AA6005A alloy10.1007/978-3-319-65136-1_60 ↗
8. Modeling of strain hardening in the aluminum alloy AA606110.1007/s11661-012-1594-6 ↗
9. Precipitation-hardened Mg-Ca-Zn alloys with superior creep resistance10.1016/j.scriptamat.2005.08.035 ↗
10. Particle effects on recrystallization in magnesium-manganese alloys: particle-stimulated nucleation10.1016/j.actamat.2009.02.032 ↗
11. Effect of Zn on mechanical property and corrosion property of extruded Mg-Zn-Mn alloy10.1016/S1003-6326(08)60131-4 ↗
12. A comparative analysis of constitutive behaviors of Mg-Mn alloys with different heat-treatment parameters10.1016/j.matdes.2010.12.048 ↗
13. The effects of Ca and Mn on the microstructure, texture and mechanical properties of Mg-4Zn alloy10.1016/j.jma.2020.03.012 ↗
14. Microstructure and texture evolution during compression-extrusion process for tension/compression symmetrical ZK61 magnesium alloy rod
15. Dynamic recrystallization as a potential cause for adiabatic shear failure
16. Dynamic precipitation behavior before dynamic recrystallization in a Mg-Zn-Mn alloy during hot compression10.1016/j.matchar.2019.04.041 ↗
17. Hot deformation behavior and processing map of a new type Mg-6Zn-1Gd-1Er alloy10.1016/j.jallcom.2021.158700 ↗
18. Hot tensile deformation mechanism and microstructure evolution of Mg-2Nd alloy with heterostructure
19. Hot deformation behavior and processing map of coarse-grained Mg-Gd-Y-Nd-Zr alloy10.1016/j.msea.2013.08.066 ↗
20. Enhanced mechanical properties in fine-grained Mg-1.0Zn-0.5Ca alloys prepared by extrusion at different temperatures10.1016/j.scriptamat.2010.07.038 ↗
21. Simulation of dynamic recrystallization in AZ80 magnesium alloy using cellular automaton10.1016/j.commatsci.2017.08.039 ↗
22. Constitutive relationships for hot deformation of austenite10.1016/j.actamat.2011.07.008 ↗
23. Hot deformation behavior and optimization of processing parameters of a typical high-strength Al-Mg-Si alloy10.1016/j.matdes.2015.11.064 ↗
24. Hot deformation behavior and 3D processing maps of AA7020 aluminum alloy10.1016/j.jallcom.2020.156113 ↗
25. Constitutive modeling and hot deformation behavior of duplex structured Mg-Li-Al-Sr alloy10.1016/j.jmst.2016.11.015 ↗
26. A general solution of unsteady Stokes equations10.1016/j.fluiddyn.2004.06.001 ↗
27. New insights on the different corrosion mechanisms of Mg alloys with solute-enriched stacking faults or long period stacking ordered phase10.1016/j.corsci.2022.110163 ↗
28. Effects of minor Nd and Er additions on the precipitation evolution and dynamic recrystallization behavior of Mg-6.0Zn-0.5Mn alloy10.1016/j.jma.2020.06.018 ↗
29. The transition from multiple-to single-peak recrystallization during the hot working of austenite10.1016/0025-5416(87)90444-7 ↗
30. High temperature deformation behavior of Mg-5wt.%Y binary alloy: constitutive analysis and processing maps10.1016/j.msea.2020.139051 ↗
31. The effect of addition of Sn to copper on hot compressive deformation mechanisms, microstructural evolution and processing maps10.1016/j.jmrt.2019.11.015 ↗
32. Optimum parameters and kinetic analysis for hot working of a solution-treated Mg-Zn-Y-Mn magnesium alloy10.1016/j.jallcom.2018.04.292 ↗
33. Deformation behavior characterized by reticular shear bands and long chain twins in Mg-Gd-Nd(-Zn)-Zr alloys10.1016/j.jmrt.2021.11.020 ↗
34. Mechanism-based strain gradient plasticity—I10.1016/S0022-5096(98)00103-3 ↗
35. Effect of subgrain and the associated DRX behaviour on the texture modification of Mg-6.63Zn-0.56Zr alloy during hot tensile deformation10.1016/j.msea.2021.141745 ↗
36. Effect of Sn addition on the deformation behavior and microstructural evolution of Mg-Gd-Y-Zr alloy during hot compression
37. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
38. Investigation of prism slip in warm-rolled AZ31 alloy10.1007/s11661-011-0800-2 ↗
39. Distribution characteristics of in-grain misorientation axes in cold-rolled commercially pure titanium and their correlation with active slip modes10.1007/s11661-010-0410-4 ↗