journal article·2026-09Open access

Lab-to-field performance evaluation of antimicrobial admixtures for bio-corrosion mitigation of concrete

Weichao Ying, Hailong Ye

Abstract

Microbial-induced concrete corrosion (MICC) poses a significant threat to the durability of sewer infrastructure, driven by sulfuric acid-producing bacteria under anaerobic-aerobic transitions. This study evaluates nine antimicrobial admixtures, including three conventional (e.g., sodium nitrite, copper nitrate) and six novel formulations (e.g., copper-exchanged zeolite, benzoate-intercalated LDHs), for their efficacy in mitigating MICC. Laboratory assessments of engineering properties (slump, setting time, compressive strength) of admixed concretes and their resistance to simulated microbial corrosion were complemented by a 12-month field test in an operational sewer. Multi-criteria decision analysis (TOPSIS) ranked admixtures, while correlation analysis validated laboratory results against field performance. Antimicrobial agents were categorized as dose-responsive or dose-limited, based on their dose-dependent efficacy and compatibility with concrete matrices. The results showed that concrete incorporating 0.5% DTAC-modified montmorillonite or 2.0% benzoate-intercalated LDHs emerged as top performers, reducing corrosion depth of concrete by up to 66% under aggressive sewer conditions while preserving structural integrity. Immobilizing copper ions via carriers (e.g., zeolite, montmorillonite) mitigated adverse effects on workability and strength, achieving higher TOPSIS scores than unmodified copper compounds. Critically, laboratory-simulated corrosion tests strongly correlated with field data (correlation coefficient: 0.87–1.00), confirming their reliability for rapid antimicrobial screening. This work establishes tailored antimicrobial admixtures as a promising solution to extend sewer infrastructure lifespan and validates accelerated lab testing as a predictive tool for real-world performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Odor and Emission Control Technologies · Corrosion Behavior and Inhibition · Microbial Applications in Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Antimicrobial concrete for smart and durable infrastructures: a review10.1016/j.conbuildmat.2020.120456 ↗
2. Microbiologically induced corrosion of concrete in sewer structures: a review of the mechanisms and phenomena
3. Microbiologically induced corrosion of concrete and protective coatings in gravity sewers10.1016/S1004-9541(11)60150-X ↗
4. Assessment of coatings for protection of cement paste against microbial induced deterioration through image analysis10.1016/j.conbuildmat.2018.10.041 ↗
5. Development of a sustainable coating and repair material to prevent bio-corrosion in concrete sewer and waste-water pipes10.1016/j.cemconcomp.2019.03.026 ↗
6. Electrokinetically deposited coating for increasing the service life of partially deteriorated concrete sewers10.1016/j.conbuildmat.2010.04.042 ↗
7. Anti-microbial corrosion performance of concrete treated by Cu2O electrodeposition: influence of different treatment parameters10.1016/j.cemconcomp.2021.104195 ↗
8. Microbiologically induced concrete corrosion: a concise review of assessment methods, effects, and corrosion-resistant coating materials10.3390/ma15124279 ↗
9. Performance of sewer pipe concrete mixtures with portland and calcium aluminate cements subject to mineral and biogenic acid attack10.1617/s11527-010-9629-1 ↗
10. The corrosion rate and microstructure of Portland cement and calcium aluminate cement-based concrete mixtures in outfall sewers: a comparative study10.1016/j.cemconres.2019.105818 ↗
11. Long-term in situ performance of geopolymer, calcium aluminate and Portland cement-based materials exposed to microbially induced acid corrosion10.1016/j.cemconres.2020.106034 ↗
12. In situ concrete sewer performance: comparison of Portland cement, calcium sulfoaluminate cement, and calcium aluminate cement10.1617/s11527-024-02390-2 ↗
13. Application potential of alkali-activated concrete for antimicrobial induced corrosion: a review
14. Antimicrobial performance and biodeterioration mechanisms of alkali-activated slag10.1016/j.cemconres.2022.106844 ↗
15. Godinho · 2025
16. Long-term durability properties of geopolymer concrete: an in-depth review
17. Alkali-activated and geopolymer materials developed using innovative manufacturing techniques: a critical review
18. Antimicrobial concrete for development: a critical review
19. Development and experimental validation of an overlay mortar with biocide activity10.1016/j.cemconcomp.2016.09.004 ↗
20. Study on the applicability of bactericides to prevent concrete microbial corrosion10.1016/j.conbuildmat.2017.05.108 ↗
21. Cement-based biocide coatings for controlling algal growth in water distribution canals10.1016/j.cemconcomp.2008.06.012 ↗
22. Production of antibacterial cement composites containing ZnO/lignin and ZnO–SiO2/lignin hybrid admixtures10.1016/j.cemconcomp.2021.104250 ↗
23. Cu- and Zn-doped alkali activated mortar – properties and durability in (bio)chemically aggressive wastewater environments10.1016/j.cemconres.2021.106541 ↗
24. Effectiveness of admixtures, surface treatments and antimicrobial compounds against biogenic sulfuric acid corrosion of concrete10.1016/j.cemconcomp.2008.12.004 ↗
25. Anti-microbial efficiency of nano silver–silica modified geopolymer mortar for eco-friendly green construction technology10.1039/C5RA12776A ↗
26. Enhancing antimicrobial properties of fly ash mortars specimens through nanophase modification10.1016/j.matpr.2016.04.020 ↗
27. Nanophase modification of concrete for enhancement of microbial properties and durability: present status and future scope
28. Photocatalytic effect of nano-TiO2 loaded cement on dye decolorization and Escherichia coli inactivation under UV irradiation10.1007/s11164-015-2374-x ↗
29. Photocatalytic, hydrophobic and antimicrobial characteristics of ZnO nano needle embedded cement composites10.1016/j.conbuildmat.2017.10.035 ↗
30. Hydration properties of Portland cement-copper tailing powder composite binder
31. Revisiting the effects of carbon nanotube agglomerates in cement
32. Antimicrobial properties of Zeolite-X and Zeolite-A ion-exchanged with silver, copper, and zinc against a broad range of microorganisms10.1007/s12010-013-0647-7 ↗
33. Zeolite-supported silver as antimicrobial agents10.1016/j.ccr.2018.12.014 ↗
34. Adsorption and antibacterial effect of copper-exchanged montmorillonite on Escherichia coli K8810.1016/j.clay.2005.10.010 ↗
35. Divalent metal release and antimicrobial effects of layered double hydroxides10.1016/j.clay.2021.106369 ↗
36. Antimicrobial alkali-activated slag through self-intercalation of benzoate in layered double hydroxides10.1016/j.cemconcomp.2022.104533 ↗
37. Evaluation of novel copper-based antimicrobial admixtures for biocorrosion mitigation of cement paste10.1016/j.cemconcomp.2024.105536 ↗
38. D01 Committee. Test methods for chemical resistance of mortars, grouts, and monolithic surfacings and polymer concretes n.d. https://doi.org/10.1520/C0267-20.].10.1520/C0267-20 ↗
39. Current understanding on microbiologically induced corrosion of concrete in sewer structures: a review of the evaluation methods and mitigation measures10.1016/j.conbuildmat.2020.118539 ↗
40. Effects of concrete composition on resistance to microbially induced corrosion10.1061/(ASCE)EE.1943-7870.0001197 ↗
41. C13 Committee. Test methods for determination of the effects of biogenic acidification on concrete antimicrobial additives and/or concrete products n.d. https://doi.org/10.1520/C1904-22.].10.1520/C1904-22 ↗
42. Microbiologically induced concrete corrosion: a case study from a combined sewer network10.1016/j.cemconres.2015.06.011 ↗
43. Performance of sewer concretes with calcium sulpho-aluminate cement and Portland cement blends: field and laboratory studies10.3390/ma18061256 ↗
44. Benchtop tests to predict service life of concrete exposed to MICC (Prepublished)
45. Assessing the effect of sodium nitrite as corrosion inhibitor against the corrosion of steel rebar in alkali-activated concrete
46. Composition, nanostructure and stability of Cu-modified C-A-S-H in antibacterial alkali-activated slag10.1016/j.cemconres.2023.107256 ↗
47. Development of novel antimicrobial air-entraining admixtures for biocorrosion control of concrete10.1016/j.cemconcomp.2025.106296 ↗
48. Cu-zeolite catalysts for NO x removal by selective catalytic reduction with NH 3 and coupled to NO storage/reduction monolith in diesel engine exhaust aftertreatment systems10.1016/j.apcatb.2016.01.020 ↗
49. Antimicrobial nanocomposites prepared from Montmorillonite/Ag +/Quaternary ammonium nitrate
50. Micro-structure and gel performance of octadecyl trimethyl ammonium chloride intercalated montmorillonite10.1016/j.colsurfa.2020.125710 ↗
51. Adsorptive removal of sulfamethazine and sulfamethoxazole from aqueous solution by hexadecyl trimethyl ammonium bromide modified activated carbon10.1016/j.colsurfa.2018.12.041 ↗
52. Fabrication and characterization of copper(II)-chitosan complexes as antibiotic-free antibacterial biomaterial10.1016/j.carbpol.2017.09.095 ↗
53. German collection of microorganisms and cell cultures GmbH: details n.d. https://www.dsmz.de/collection/catalogue/details/culture/DSM-504.
54. Synergistic effect on concrete corrosion control in sewer environment achieved by applying surface washing on calcium nitrite admixed concrete10.1016/j.conbuildmat.2021.124184 ↗
55. Controlling natural resources depletion through montmorillonite replacement for cement-low cost construction