Fabrication of binary metal doped CuO nanocatalyst and their application for the industrial effluents treatment
Source abstract
Abstract
Abstract Herein, we fabricated the binary transition metal (Ce & Zn) doped CuO nanocatalyst via a single step facile co-precipitation technique by using liquid ammonia as a pH regulator and precipitating agent. The structural, morphological, and compositional studies of the fabricated samples were completed via X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and EDX techniques, respectively. The impact of binary metal-doped CuO nanocatalyst on the optical band-gap was examined via the UV-Visible spectroscopic technique. The photocatalytic aptitude of the fabricated pristine and binary metal-doped CuO nanocatalyst was examined against the 5-ppm aqueous solution of MB dye. The obtained results revealed that the doped sample removes 81.64% MB dye, via adsorption (32.65%) and degradation (48.99%) processes, while in comparison the pristine CuO sample removes just 38.77%. The superior adsorption and degradation aptitude of the binary metal-doped sample can be ascribed to its higher surface area and tuned band-gap, respectively. Moreover, the kinetic study of the degradation process also displayed that the doped sample degrades the MB dye with a higher value of the rate constant (0.0137 min−1) than that of pristine CuO photocatalyst (0.0049 min−1). The tuned band-gap and nanoarchitecture morphology of the doped CuO not only facilitate the excitation process but also assist in the transportation of the photo-induced species towards the surface of the photocatalyst. The observed superior photocatalytic activity of the binary metal-doped CuO photocatalyst showed its exceptional aptitude for the treatment of toxic industrial effluents.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Water pollution in Pakistan and its impact on public health — a review10.1016/j.envint.2010.10.007 ↗
2. Organotin compounds and international treaties on the pollution of water by dangerous substances: black or grey list substances?10.1016/0048-9697(85)90130-5 ↗
3. Magnetically recyclable Ni1-xCdxCeyFe2-yO4-rGO nanocomposite photocatalyst for visible light driven photocatalysis10.1016/j.ceramint.2020.02.136 ↗
4. Binder free mesoporous Ag-doped Co3O4 nanosheets with outstanding cyclic stability and rate capability for advanced supercapacitor applications10.1016/j.jallcom.2020.156062 ↗
5. Structural and photocatalytic properties of new rare earth La3+ substituted MnFe2O4 ferrite nanoparticles10.1016/j.ceramint.2020.06.103 ↗
6. Photocatalytic degradation of methylene blue on magnetically separable MgFe2O4 under visible light irradiation10.1016/j.matchemphys.2013.01.058 ↗
7. Testing and substantial improvement of TiO2/UV photocatalysts in the degradation of Methylene Blue10.1016/j.ceramint.2018.10.249 ↗
8. Kinetic evaluation of ZnO/TiO2 thin film photocatalyst in photocatalytic degradation of Orange G10.1016/j.molliq.2020.112905 ↗
9. The efficacy of Co3O4 loaded WO3 sheets for the enhanced photocatalytic removal of 2,4,6-trichlorophenol in natural sunlight exposure10.1016/j.jhazmat.2020.122835 ↗
10. SPR propelled visible-active photocatalysis on Au-dispersed Co3O4 films10.1016/j.apcata.2013.07.021 ↗
11. CeO2/Co3O4 hollow microsphere: pollen-biotemplated preparation and application in photo-catalytic degradation10.1016/j.colsurfa.2019.124193 ↗
12. Selectivity in the photocatalytic properties of the composites of TiO2 nanoparticles with B-and N-doped graphenes10.1016/j.cplett.2011.06.033 ↗
13. Effect of Fe3+ ion doping to TiO2 on the photocatalytic degradation of Malachite Green dye under UV and vis-irradiation10.1016/j.jphotochem.2008.12.021 ↗
14. CuO nanoparticles: synthesis, characterization, optical properties and interaction with amino acids10.1016/j.apsusc.2011.11.025 ↗
15. Correlation between surface chemistry and optical properties in colloidal Cu2O nanoparticles10.1021/acs.jpcc.9b10753 ↗
16. Preparation of CuO nanoparticles by microwave irradiation10.1016/S0022-0248(02)01571-3 ↗
17. Honeycomb like architectures of the Mo doped ZnS@Ni for high-performance asymmetric supercapacitors applications10.1016/j.synthmet.2020.116408 ↗
18. Influence of Ce doping on CuO nanoparticles synthesized by microwave irradiation method10.1016/j.apsusc.2018.01.126 ↗
19. Optical, thermal and magnetic studies on zinc-doped copper oxide nanoparticles10.1016/j.matlet.2013.04.108 ↗
20. An in situ gelatin-assisted hydrothermal synthesis of ZnO–reduced graphene oxide composites with enhanced photocatalytic performance under ultraviolet and visible light10.1039/c3ra46417b ↗
21. Synthesis, characterization and photocatalytic parameters investigation of a new CuFe2O4/Bi2O3 nanocomposite10.1016/j.ceramint.2020.08.091 ↗
22. Magnetically recyclable Ni1-xCdxCeyFe2-yO4-rGO nanocomposite photocatalyst for visible light driven photocatalysis10.1016/j.ceramint.2020.02.136 ↗
23. Hierarchically porous CuO microspheres and their r-GO based nanohybrids for electrochemical supercapacitors applications10.1016/j.jmrt.2020.09.110 ↗
24. Physical, structural and dielectric parameters evaluation of new Mg1-xCox NiyFe2-yO4 nano-ferrites synthesized via wet chemical approach10.24911/AAAFM/Energy/23-1567670091 ↗
25. Flake-like MoS2 nano-architecture and its nanocomposite with reduced Graphene Oxide for hybrid supercapacitors applications10.1016/j.ceramint.2020.05.179 ↗
26. Superior electrochemical activity of α-Fe2O3/rGO nanocomposite for advance energy storage devices10.1016/j.jallcom.2016.08.029 ↗
27. Free-standing urchin-like nanoarchitectures of Co3O4 for advanced energy storage applications10.1016/j.jmrt.2020.08.110 ↗
28. Enhanced electrochemical energy storage properties of carbon coated Co3O4 nanoparticles-reduced graphene oxide ternary nano-hybrids10.1016/j.ceramint.2020.04.090 ↗
29. Wafer‐like CoS architectures and their nanocomposites with polypyrrole for electrochemical energy storage applications10.1002/slct.202001305 ↗
30. Surfactant free hydrothermal synthesis of copper oxide nanoparticles
31. Advanced Materials Letters Synthesis and doping feasibility of composite- hydroxide-mediated approach for the Cu1-xZnxO nanomaterials
32. A photoelectrochemical determination of the position of the conduction and valence band edges of p‐type CuO10.1063/1.330567 ↗
33. Enhanced photocatalytic properties of zinc-doped CuO decorated with silver obtained by microwave-assisted hydrothermal method: statistical factorial design10.1007/s11664-019-07267-7 ↗
34. Synthesis and characterization of Ce-doped CuO nanostructures and their photocatalytic activities10.1016/j.matlet.2016.01.020 ↗
35. Synthesis of CuO/Co3O4 coaxial heterostructures for efficient and recycling photodegradation10.1155/2015/183468 ↗
36. Structural, optical and photocatalytic properties of Fe and (Co, Fe) co-doped copper oxide spin coated films10.1016/j.saa.2015.05.010 ↗
37. Visible light driven photocatalytic activity of unsubstituted and Ag1+/Al3+-substituted CuO nanoflakes10.1016/j.ceramint.2020.02.211 ↗
38. Photocatalytic splitting of seawater and degradation of methylene blue on CuO/nano TiO210.1016/j.ijhydene.2012.04.091 ↗
39. Hydrothermal synthesis of highly stable CuO nanostructures for efficient photocatalytic degradation of organic dyes10.1016/j.mssp.2014.10.012 ↗
40. Synthesis of Cu-CuO nanocomposite in microreactor and its application to photocatalytic degradation10.1016/j.jallcom.2016.10.195 ↗
41. CuxNi1-xO nanostructures and their nanocomposites with reduced graphene oxide: synthesis, characterization, and photocatalytic applications