Effects of surface structure unit of 2D needled carbon fiber preform on the microstructure and ablation properties of C/C-ZrC-SiC composites
Source abstract
Abstract
Abstract To investigate the effects of different structure units on the ablation properties of C/C-ZrC-SiC composites produced from 2D needled carbon fiber preforms as reinforcements, non-woven layer, short-cut fiber web and the surface of laminated layers of the composites were ablated by oxyacetylene flame respectively. Results showed that the formation ability of surface protective layer and the fiber orientation were the key factors, determining ablation properties of different structure units. Short-cut fiber web presented the best ablation resistance due to the forming of compactly integrated ZrO2 self-protection coating because of its sufficient ceramic content. However, only scattered oxide particles formed on the ablated surface of non-woven layer, which resulted in serious erosion of carbon fibers and carbon matrices, leading to the poor ablation resistance. Compared with the non-woven layer perpendicular to the flame, the anti-ablation property was even worse when it paralleled to the flame.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Advances in oxidation and ablation resistance of high and ultra-high temperature ceramics modified or coated carbon/carbon composites10.1016/j.jeurceramsoc.2017.08.013 ↗
2. Densification behavior and ablation property of C/C-ZrC composites prepared by chemical liquid vapor deposition process at temperatures from 800 to 1100 °C10.1016/j.ceramint.2018.01.239 ↗
3. Effect of ablative angles on the ablation behaviors of ZrB2-SiC modified carbon/carbon composites10.1016/j.jallcom.2018.02.228 ↗
4. Ablation properties of Cf/C-SiC-MoSi2 composites: effects of hydrothermal penetration temperature10.1016/j.jallcom.2017.01.316 ↗
5. Ablation behavior of C/C-ZrC and C/SiC-ZrC composites fabricated by a joint process of slurry impregnation and chemical vapor infiltration10.1016/j.ceramint.2017.12.062 ↗
6. Design, preparation and properties of carbon fiber reinforced ultra-high temperature ceramic composites for aerospace applications: a review
7. Ablation behaviors of ultra-high temperature ceramic composites10.1016/j.msea.2007.02.040 ↗
8. Influence of preparation temperature on the properties of C/ZrC composites10.1016/j.jallcom.2016.08.103 ↗
9. Microstructure and ablation mechanism of C/C-ZrC-SiC composites in a plasma flame10.1016/j.ceramint.2017.04.089 ↗
10. Microstructure and ablation behaviors of a novel gradient C/C-ZrC-SiC composite fabricated by an improved reactive melt infiltration10.1016/j.ceramint.2016.07.190 ↗
11. Effect of ZrC particle size on the ablation resistance of C/C-ZrC-SiC composites10.1016/j.matdes.2017.05.019 ↗
12. Effects of low-temperature thermal cycling treatment on the microstructures, mechanical properties and oxidation resistance of C/C-ZrC-SiC composites10.1016/j.jallcom.2017.05.263 ↗
13. Effects of SiC interphase on the mechanical and ablation properties of C/C-ZrC-ZrB2-SiC composites prepared by precursor infiltration and pyrolysis10.1016/j.matdes.2017.02.086 ↗
14. Ablation and mechanical behavior of a sandwich-structured composite with an inner layer of Cf/SiC between two outer layers of Cf/SiC-ZrB2-ZrC10.1016/j.corsci.2013.11.019 ↗
15. Ablative property and mechanism of C/C-ZrB2-ZrC-SiC composites reinforced by SiC networks under plasma flame10.1016/j.corsci.2016.02.015 ↗
16. Comparative ablation behaviors of C/SiC-HfC composites prepared by reactive melt infiltration and precursor infiltration and pyrolysis routes10.1016/j.ceramint.2017.08.175 ↗
17. Ablation resistance of SiC-HfC-ZrC multiphase modified carbon/carbon composites10.1016/j.corsci.2015.06.037 ↗
18. Ablation behavior and mechanism of C/C-HfC-SiC composites10.1016/j.vacuum.2015.03.024 ↗
19. Inherent anisotropy in transition metal diborides and microstructure/property tailoring in ultra-high temperature ceramics-A review10.1016/j.jeurceramsoc.2017.09.012 ↗
20. Fabrication and properties of Cf/ZrC-SiC-based composites by an improved reactive melt infiltration
21. Ablation behaviour of C/C-ZrC composites in a solid rocket motor environment10.1016/j.ceramint.2015.05.147 ↗
22. Ablation behavior of sharp-shape C/C-SiC-ZrB2 composites under oxyacetylene flame10.1016/j.jallcom.2017.04.188 ↗
23. Fabrication and performance of a C/C composite using a needled non-woven carbon fiber felt as a preform
24. Research progress on preforms of C/C composites
25. Effect of needle - punched preform parameters on the mechanical properties of carbon/carbon composites
26. Aerothermal behaviour of a SiC fibre-reinforced ZrB2 sharp component in supersonic regime10.1016/j.jeurceramsoc.2012.01.019 ↗
27. Microstructure and ablation properties of zirconium carbide doped carbon/carbon composites10.1016/j.carbon.2009.09.035 ↗
28. Influence of SiC additive on the ablation behavior of C/C composites modified by ZrB2-ZrC particles under oxyacetylene torch10.1016/j.ceramint.2013.06.036 ↗