Effect of BN content on the mechanical and dielectric properties of porous BNp/Si3N4 ceramics
Source abstract
Abstract
Abstract Porous BNp/Si3N4 ceramics were prepared by gas pressure sintering method as a candidate wave-transparent material. The effects of BN particle additions ranging from 0 wt% to 15 wt% on the phase compositions, microstructures, mechanical performance and dielectric properties were investigated. With the increase of BN content, the apparent porosity of the BN/Si3N4 ceramics increased greatly from 2.3% to 21.2%. Although the mechanical properties were partially weaken, the dielectric performance of the porous BN/Si3N4 was largely enhanced at the same time. For the 10% BN/Si3N4 porous composite ceramics, the permittivity and dielectric loss was 33.5% and 62.2% lower than that of the porous Si3N4 without BN content, respectively. Specifically, when 10% BN particles were added, the porous BNp/Si3N4 has a porosity of 20.5% and the permittivity and dielectric loss were 5.14 and 0.0085 respectively with bending strength of 190.1 MPa and fracture toughness of 4.16 MPa m1/2, which can meet the required value of wave transparent materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Progress and prospect of wave-transparent boron nitride materials
2. Interface structure and atomic bonding characteristics in silicon nitride ceramics10.1126/science.1104173 ↗
3. Mechanical and dielectric properties of porous Si3N4–SiO2 composite ceramics10.1016/j.msea.2008.09.066 ↗
4. Research on the dielectric properties of radome material made with nanometer silicon nitride
5. Effect of BN content on microstructures, mechanical and dielectric properties of porous BN/Si3N4 composite ceramics prepared by gel casting10.1016/j.ceramint.2012.11.005 ↗
6. Dielectric and mechanical properties of porous Si3N4 ceramics prepared via low temperature sintering10.1016/j.ceramint.2008.09.010 ↗
7. High performance porous Si3N4 ceramics prepared by coated pore-forming agent method10.1016/j.ceramint.2009.05.007 ↗
8. BN/Si3N4 nanocomposite with high strength and good machinability10.1016/j.msea.2005.09.085 ↗
9. Effect of BN whiskers on dielectric and mechanical properties of BNw/Si3N4 composites10.1179/143307511X13018917925946 ↗
10. Preparation of High-density Si3N4 by a gas-pressure sintering process10.1111/j.1151-2916.1981.tb15895.x ↗
11. Influence of powder characteristics on gas pressure sintering of Si3N410.1007/BF00551328 ↗
12. Interface structure related to growth of β-phase in hot pressed silicon nitride and its growth mechanism
13. High-temperature mechanical and thermal properties of h-BN/30vol% Y2SiO5 composite10.1016/j.ceramint.2015.05.030 ↗
14. Anisotropic mechanical properties and fracture mechanisms of textured h-BN composite ceramics10.1016/j.msea.2014.03.132 ↗
15. Co-enhanced SiO2-BN ceramics for high-temperature dielectric applications10.1016/S0955-2219(00)00107-2 ↗
16. Derivation of Lichtenecker's logarithmic mixture formula from Maxwell's equations10.1109/TMTT.2010.2040406 ↗