Graphene oxide wrapped Na3V2(PO4)3/C nanocomposite as superior cathode material for sodium-ion batteries
Source abstract
Abstract
Abstract Na3V2(PO4)3 is one of the most promising cathode materials for rechargeable sodium-ion batteries, which can deliver two Na+ ions extraction/insertion from/into the crystal structure. To further improve the electrochemical performance of the carbon-coated Na3V2(PO4)3 electrode, the conducting graphene has been adopted. In this paper, graphene-wrapped Na3V2(PO4)3/C nanocomposite has been successfully synthesized through a hydrothermal-assisted sol–gel method. X-ray diffraction (XRD) results demonstrate that the obtained nanocomposite is well crystallized with NASICON-type structure. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images reveal that the modification of Na3V2(PO4)3/C with graphene could construct an effective conducting network, which significantly enhances the electronic conductivity of Na3V2(PO4)3/C based sample. Thus, the graphene-wrapped Na3V2(PO4)3/C exhibits superior high-rate capacity and excellent cycling stability. It shows an initial charge capacity of 113 mA h g−1 and a discharge capacity of 106.5 mA h g−1 at 0.1 C, and retains stable discharge capacities of 104.3, 101.1, 96.4 and 93 mA h g−1 at current rates of 0.2 C, 0.5 C, 1 C and 2 C, respectively. Even at higher rate of 5 C, it can still deliver a discharge capacity of 88.7 mA h g−1 with remarkable capacity retention of 92.5% after 200 cycles. This synthetic strategy should be helpful for the design of other conducting network structured electrodes with high-performances.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Nanostructured materials for electrochemical energy conversion and storage devices10.1002/adma.200800627 ↗
3. Nanostructured materials for advanced energy conversion and storage devices10.1038/nmat1368 ↗
4. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
5. Lithium batteries and cathode materials10.1021/cr020731c ↗
6. Positive electrode materials for Li-ion and Li-batteries10.1021/cm902696j ↗
7. Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries10.1039/c2ee21892e ↗
8. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
9. Functional materials for rechargeable batteries10.1002/adma.201003587 ↗
10. Room-temperature stationary sodium-ion batteries for large-scale electric energy storage10.1039/c3ee40847g ↗
11. Electrode materials for rechargeable sodium-ion batteries: potential alternatives to current lithium-ion batteries10.1002/aenm.201200026 ↗
12. Sodium-ion batteries10.1002/adfm.201200691 ↗
13. Electrochemical investigation of the P2–NaxCoO2 phase diagram10.1038/nmat2920 ↗
14. Electrochemical intercalation and deintercalation of NaxMnO2 bronzes10.1016/0022-4596(85)90194-X ↗
15. Sodium extraction from sodium iron phosphate with a Maricite structure10.1016/j.ssi.2014.04.019 ↗
16. Synthesis and electrochemical performance of Na0.7Fe0.7Mn0.3O2 as a cathode material for Na-ion battery10.1016/j.ceramint.2014.04.126 ↗
17. Self-combustion synthesis of Na3V2(PO4)3 nanoparticles coated with carbon shell as cathode materials for sodium-ion batteries10.1016/j.electacta.2014.12.160 ↗
18. Carbon-coated Na3V2(PO4)3 embedded in porous carbon matrix: an ultrafast Na-storage cathode with the potential of outperforming Li cathodes10.1021/nl500548a ↗
19. Carbon coated Na3V2(PO4)3 as novel electrode material for sodium ion batteries10.1016/j.elecom.2011.11.009 ↗
20. Electrospun Na3V2(PO4)3/C nanofibers as stable cathode materials for sodium-ion batteries10.1039/c3nr05329f ↗
21. Electrochemical and thermal properties of NASICON structured Na3V2 (PO4)3 as a sodium rechargeable battery cathode: a combined experimental and theoretical study10.1149/2.015209jes ↗
22. High rate performance of a Na3V2(PO4)3/C cathode prepared by pyro-synthesis for sodium-ion batteries10.1039/c2jm34451c ↗
23. Superior electrochemical performance and storage mechanism of Na3V2(PO4)3 cathode for room-temperature sodium-ion batteries10.1002/aenm.201200558 ↗
24. First exploration of Na-ion migration pathways in the NASICON structure Na3V2(PO4)310.1039/c4ta00230j ↗
25. Graphene-supported Na3V2(PO4)3 as a high rate cathode material for sodium-ion batteries10.1039/c3ta12116j ↗
26. Large reversible capacity of high quality graphene sheets as an anode material for lithium-ion batteries10.1016/j.electacta.2010.02.025 ↗
27. A compromise of electrochemical performances of Li3V2(PO4)3/C upon cycling within a suitable potential range10.1016/j.electacta.2013.11.074 ↗
28. Glucose-assisted synthesis of Na3V2(PO4)3/C composite as an electrode material for high-performance sodium-ion batteries10.1016/j.jpowsour.2014.04.054 ↗
29. TiO2 nanocrystals grown on graphene as advanced photocatalytic hybrid materials10.1007/s12274-010-0033-5 ↗
30. Nanocrystal growth on graphene with various degrees of oxidation10.1021/ja100329d ↗
31. Self-assembled TiO2–graphene hybrid nanostructures for enhanced Li-ion insertion10.1021/nn900150y ↗
32. Graphene in lithium ion battery cathode materials: a review10.1016/j.jpowsour.2013.03.160 ↗
33. Electric field effect in atomically thin carbon films10.1126/science.1102896 ↗
34. Functionalized graphene sheets for polymer nanocomposites10.1038/nnano.2008.96 ↗
35. Role of hydrothermal parameters on phase purity of orthorhombic LiMnO2 for use as cathode in Li ion battery10.1016/j.ceramint.2015.01.116 ↗
36. Spinel LiMn2O4/reduced graphene oxide hybrid for high rate lithium ion batteries10.1039/c1jm13741g ↗
37. A facile approach to nanoarchitectured three-dimensional graphene-based Li–Mn–O composite as high-power cathodes for Li-ion batteries10.3762/bjnano.3.59 ↗
38. A rapid microwave heating route to synthesize graphene modified LiFePO4/C nanocomposite for rechargeable lithium-ion batteries10.1016/j.ceramint.2014.07.106 ↗
39. A facile method of preparing mixed conducting LiFePO4/graphene composites for lithium-ion batteries10.1016/j.ssi.2010.09.056 ↗
40. Nano-Li3V2(PO4)3 enwrapped into reduced graphene oxide sheets for lithium-ion batteries10.1016/j.jpowsour.2014.04.046 ↗
41. Li3V2(PO4)3/graphene nanocomposite as a high performance cathode material for lithium ion battery10.1016/j.ceramint.2014.08.082 ↗
42. Li3V2(PO4)3/graphene nanocomposites as cathode material for lithium ion batteries10.1039/c1cc12941d ↗
43. Long-life and high-rate LiVPO4F/C nanocrystals modified with graphene as cathode material for lithium-ion batteries10.1016/j.ssi.2014.10.031 ↗
44. A Na3V2(PO4)3 cathode material for use in hybrid lithium ion batteries10.1039/c3cp52308j ↗
45. Hierarchically porous LiFePO4/nitrogen-doped carbon nanotubes composite as a cathode for lithium ion batteries10.1039/c2jm30380a ↗
46. A chemically activated graphene-encapsulated LiFePO4 composite for high-performance lithium ion batteries10.1039/c3nr02738d ↗
47. Bacteriorhodopsin as a superior substitute for hydrazine in chemical reduction of single-layer graphene oxide sheets10.1016/j.carbon.2014.09.044 ↗
48. Raman spectroscopy in graphene10.1016/j.physrep.2009.02.003 ↗
49. Large-scale synthesis of bi-layer graphene in stringly coupled stacking order10.1002/adfm.201002227 ↗
50. Effect of reduction agent on the performance of Li3V2(PO4)3/C positive material by one-step solid-state reaction10.1016/j.electacta.2008.10.062 ↗
51. Na3V2(PO4)3@C core-shell nanocomposites for rechargeable sodium-ion batteries10.1039/c4ta00106k ↗
52. Heterogeneous branched core-shell SnO2–PANI nanorod arrays with mechanical integrity and three dimentional electron transport for lithium batteries10.1016/j.nanoen.2014.06.006 ↗
53. Carbon-nanotube-decorated nano-LiFePO4@C cathode material with superior high-rate and low-temperature performances for lithium-ion batteries10.1002/aenm.201300159 ↗
54. Study of LiFePO4 cathode modified by graphene sheets for high-performance lithium ion batteries10.1016/j.electacta.2012.10.050 ↗
55. Enhanced electrochemical performance of graphene modified LiFePO4 cathode material for lithium ion batteries10.1016/j.ssi.2013.08.030 ↗
56. In-situ synthesizing superior high-rate LiFePO4/C nanorods embedded in graphene matrix10.1016/j.electacta.2013.11.106 ↗
57. Li3V2(PO4)3 nanocrystals embedded in a nanoporous carbon matrix supported on reduced graphene oxide sheets: binder-free and high rate cathode material for lithium-ion batteries10.1016/j.jpowsour.2012.03.113 ↗