journal article·2014-08

Study on the electrochemical performance of high-cycle LiMg0.08Mn1.92O4 cathode material prepared by a solid-state combustion synthesis

Mingwu Xiang, Liqing Ye, Cancan Peng, Lei Zhong, Hongli Bai, Changwei Su, Junming Guo

Ceramics International· Volume 40· Issue 7
Publisher page

Abstract

Abstract LiMg 0.08 Mn 1.92 O 4 cathode materials were prepared by a solid-state combustion synthesis at different calcination temperatures. The crystal structure was characterized by X-ray diffraction (XRD) analysis and the morphology was observed by scanning electron microscopy (SEM). All the calcined materials were identified as the spinel structure of LiMn 2 O 4 . The materials synthesized at 500 °C, 600 °C and 700 °C were single phase, while Mn 3 O 4 impurity phases can be detected in the other materials synthesized at 800 °C and 900 °C. The average particle size increased with the increase of calcination temperature. The effect of two-stage calcination temperature on the electrochemical properties of the LiMg 0.08 Mn 1.92 O 4 materials was studied by galvanostatic charge/discharge tests, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements. Results showed that the structural stability of the materials was improved due to Mg-doping. The LiMg 0.08 Mn 1.92 O 4 materials calcined at 600 °C and 700 °C demonstrated excellent electrochemical performance with an initial discharge specific capacity of 101.3 mAh g −1 and 107.6 mAh g −1 , and their capacity retention was 98.1% and 94.3% after 40 cycles at 0.2 C, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Electrical and Thermal Properties of Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Recent developments in cathode materials for lithium ion batteries10.1016/j.jpowsour.2009.08.089 ↗
2. Recent progress in cathode materials research for advanced lithium ion batteries10.1016/j.mser.2012.05.003 ↗
3. Synthesis and electrochemical properties of chemically substituted LiMn2O4 prepared by a solution-based gel method10.1016/j.jcis.2006.04.002 ↗
4. Electrochemical evaluation of dual-doped LiMn2O4 spinels synthesized via co-precipitation method as cathode material for lithium rechargeable batteries10.1016/j.jallcom.2012.12.053 ↗
5. Effect of Al-doping on the electrochemical properties of a three-dimensionally porous lithium manganese oxide for lithium-ion batteries10.1016/j.electacta.2012.04.136 ↗
6. Li, Al)-co-doped spinel, Li(Li0.1Al0.1Mn1.8)O4 as high performance cathode for lithium ion batteries10.1016/j.electacta.2012.10.011 ↗
7. Structural transition in Mg-doped LiMn2O4: a comparison with other M-doped Li–Mn spinels10.1016/S0038-1098(02)00769-X ↗
8. Cr3+ modified LiMn2O4 spinel intercalation cathodes through oxalic acid assisted sol–gel method for lithium rechargeable batteries10.1016/j.materresbull.2004.08.013 ↗
9. Research progress in high voltage spinel LiNi0.5Mn1.5O4 material10.1016/j.jpowsour.2010.03.067 ↗
10. Development of structural stability and the electrochemical performances of ‘La’ substituted spinel LiMn2O4 cathode materials for rechargeable lithium-ion batteries10.1016/j.ssi.2008.04.010 ↗
11. Lithium-ion insertion kinetics of Nb-doped LiMn2O4 positive-electrode material10.1016/j.ceramint.2012.10.256 ↗
12. Combustion synthesis of spinel LiMn2O4 cathode materials for lithium secondary batteries10.1023/A:1010942316136 ↗
13. Performance improvement of LiMn2O4 as cathode material for lithium ion battery with bismuth modification10.1016/j.jpowsour.2008.04.019 ↗
14. Molten salt synthesis of LiMn2O4 using chloride-carbonate melt10.1016/j.matchemphys.2010.06.063 ↗
15. Synthesis of spinel LiMn2O4 nanoparticles through one-step hydrothermal reaction10.1016/j.jpowsour.2007.07.039 ↗
16. Lithium ion phase-transfer reaction at the interface between the lithium manganese oxide electrode and the nonaqueous electrolyte10.1021/jp044283j ↗
17. Synthesis of spherical LiMn2O4 microparticles by a combination of spray pyrolysis and drying method10.1016/j.powtec.2007.05.011 ↗
18. Enhanced cycle ability of spinel LiMn2O4 by controlling the phase purity and structural strain10.1016/j.jpcs.2012.07.006 ↗
19. A literature review and test: structure and physicochemical properties of spinel LiMn2O4 synthesized by different temperatures for lithium ion battery10.1016/j.synthmet.2009.02.026 ↗
20. Synthesis and characterization of Li[Mn2−xMgx]O4(x=0.0–0.3) prepared by sol–gel synthesis
21. Synthesis of Mg-doped LiMn2O4 powders for lithium-ion batteries by rotary heating10.1016/j.matchemphys.2004.05.023 ↗
22. Synthesis of Li–Mn spinel oxide using Mn2O3 particles10.1016/S0167-2738(99)00214-3 ↗
23. Improvement of capacity and cycling performance of spinel LiMn2O4 cathode materials with TiO2-B nanobelts10.1016/j.electacta.2013.08.063 ↗
24. Effect of citric acid on electrochemical properties of spinel LiMn2O4 prepared by solid-state combustion synthesis10.4028/www.scientific.net/AMR.581-582.353 ↗
25. Nano-sized LiMn2O4 spinel cathode materials exhibiting high rate discharge capability for lithium-ion batteries10.1016/j.jpowsour.2011.03.081 ↗
26. Synthesis and electrochemical performance of spinel-type LiMn2O4 using g-MnOOH rods as self-template for lithium ion battery10.1016/j.jpowsour.2012.07.118 ↗
27. Effect of Cr-sources on performance of Li1.05Cr0.04Mn1.96O4 cathode materials prepared by slurry spray drying method10.1016/j.jallcom.2009.12.172 ↗