journal article·2014-04

Effects of the single layer CVD SiC interphases on mechanical properties of mullite fiber-reinforced mullite matrix composites fabricated via a sol–gel process

Yi Wang, Haifeng Cheng, Jun Wang

Ceramics International· Volume 40· Issue 3
Publisher page

Abstract

Abstract Due to the degradation of mechanical properties of mullite fiber-reinforced mullite matrix (Mu f /Mu) composites with pyrocarbon (PyC) and BN interphases under an oxidation environment, single layer SiC interphases prepared by a chemical vapor deposition (CVD) process were employed. Effects of the CVD SiC interphases on mechanical properties and interfacial characteristics of Mu f /Mu composites fabricated via a sol–gel process were investigated. The results show that the composites with CVD SiC interphases exhibit an obvious toughened fracture behavior, and the flexural strength is about 2.67 times that of the composites without SiC interphases. Microstructure analysis reveals that SiC interphases play a key part in protecting fibers from being damaged during the fabrication process of the composites, and weakening bonding between fibers and matrix, which are both beneficial to the improvement in mechanical properties of the composites. Flexural strength of the composites with SiC interphases after oxidation decreases by about 25.4%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. 2005
2. Structure and properties of mullite—a review10.1016/j.jeurceramsoc.2007.03.017 ↗
3. Mullite for structural, electronic, and optical applications10.1111/j.1151-2916.1991.tb06768.x ↗
4. Fabrication and mechanical properties of three-dimensional carbon fibre reinforced mullite composites via sol–gel
5. Interfacial debonding behavior of mullite/SiC continuous fiber composite10.1111/j.1151-2916.1995.tb07956.x ↗
6. Aluminosilicate fiber/mullite matrix composites with favorable high-temperature properties10.1016/S0955-2219(99)00260-5 ↗
7. Mullite (Nextel™ 720) fibre-reinforced mullite matrix composites exhibiting favourable thermomechanical properties10.1016/S0955-2219(01)00531-3 ↗
8. Oxide ceramic matrix/oxide fibre woven fabric composites exhibiting dissipative fracture behavior10.1016/0010-4361(95)91380-N ↗
9. Degradation of oxide fibers by thermal overload and environmental effects10.1016/j.msea.2012.05.107 ↗
10. Thermal degradation of fiber coatings in mullite-fiber-reinforced mullite composites10.1111/j.1151-2916.1997.tb03099.x ↗
11. Control of interface properties in oxide composites via fugitive coatings10.1111/j.1551-2916.2008.02746.x ↗
12. Monazite-containing oxide/oxide composites10.1016/S0955-2219(99)00256-3 ↗
13. Effects of the single layer CVD SiC interphases on the mechanical properties of the SiCf/SiC composites fabricated by PIP process10.1016/j.ceramint.2010.05.014 ↗
14. Structural characterization of β-SiC nanowires synthesized by direct heating method10.1016/j.msec.2005.09.083 ↗
15. Characterisation of stoichiometric sol–gel mullite by Fourier transform infrared spectroscopy10.1016/S1466-6049(01)00189-1 ↗
16. Dielectric properties of the SiC fiber-reinforced SiC matrix composites with the CVD SiC interphases10.1016/j.jallcom.2009.09.163 ↗
17. Transmission electron microscopic investigations on SiC- and BN-coated carbon fibres10.1007/BF01152148 ↗
18. Effects of the fiber surface characteristics on the interfacial microstructure and mechanical properties of the KD SiC fiber reinforced SiC matrix composites10.1016/j.msea.2009.07.018 ↗
19. An X-ray powder diffraction study of the microstructural evolution on heating 3:2 and 2:1 mullite single-phase gels10.1002/crat.200610717 ↗
20. Microstructure and room temperature mechanical properties of mullite fibers after heat-treatment at elevated temperatures10.1016/j.msea.2013.04.089 ↗
21. Improving the microstructural stability of Nextel™ 610 alumina fibers embedded in a porous alumina matrix10.1111/j.1551-2916.2010.03658.x ↗
22. Effects of the single layer CVD SiC interphases on the mechanical properties of the C/SiC composites fabricated by PIP process10.1016/j.msea.2012.08.026 ↗
23. Effects of SiC interphase by chemical vapor deposition on the properties of C/ZrC composite prepared via precursor infiltration and pyrolysis route10.1016/j.matdes.2012.09.019 ↗
24. Thermal degradation of an oxide fibre (Nextel 720)/aluminosilicates composite10.1016/S0955-2219(03)00250-4 ↗
25. AlPO4-coated mullite/alumina fiber reinforced reaction-bonded mullite composites10.1016/j.jeurceramsoc.2008.05.032 ↗
26. Effects of coating properties on crack propagation in Nicalon-fiber/SiC-matrix composites10.1016/S0266-3538(96)00087-5 ↗