Porous Si3N4 ceramics prepared via slip casting of Si and reaction bonded silicon nitride
Source abstract
Abstract
Abstract Slip casting process combined with reaction bonded silicon nitride (RBSN) was used to prepare porous Si 3 N 4 ceramic with near-net and complex shape. A butyl stearate (BS) coated process was introduced to restrain the hydrolysis of Si, and ammonium polyacrylate (NH 4 PAA) was used to enhance the dispersion of coated Si. The measured oxygen content showed that the hydrolysis of Si was strongly prohibited by BS coating, and relatively low viscosity was obtained with the addition of 0.25–1.5 wt% NH 4 PAA to the 60 wt% solid load slurry. 40–60 wt% solid load slurries were used for slip casting in the experiment. After vacuum degassing, slip casting, debindering and nitridation, a density of 1.57–1.92 g/cm 3 (porosity 50.9–40%) and a flexural strength of 47–108 MPa were obtained. The samples without vacuum degassing showed a large number of nanowires grown in the large pores.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · MXene and MAX Phase Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Rice · 1998
2. Synthesis and properties of porous Si3N4/SiC nanocomposites by carbothermal reaction between Si3N4 and carbon10.1016/S1359-6454(02)00350-6 ↗
3. Thermal shock behavior of isotropic and anisotropic porous silicon nitride10.1111/j.1151-2916.2003.tb03367.x ↗
4. Reaction-bonded silicon nitride: its formation and properties10.1007/BF00561287 ↗
5. Oxidation mechanism of porous silicon-nitride10.1007/BF01120040 ↗
6. Silicon nitride and related materials10.1111/j.1151-2916.2000.tb01182.x ↗
7. Slip casting of silcon shapes and their nitriding
8. Properties of silicon suspensions and slip-cast bodies
9. The characterisation of aqueous silicon slips10.1016/S0955-2219(99)00064-3 ↗
10. Slip-cast hot isostatically pressed silicon nitride gas turbine components10.1016/0921-5093(89)90617-5 ↗
11. Rheological properties and gelcasting of concentrated aqueous silicon suspension10.1016/j.msea.2005.04.021 ↗
12. Rheological properties and thixotropy model of concentrated aqueous silicon slurry for gel casting10.1016/j.colsurfa.2007.10.006 ↗
13. Aqueous processing of sintered reaction-bonded silicon nitride. 1. Dispersion properties of silicon powder10.1111/j.1151-2916.1997.tb03052.x ↗
14. Dispersion and rheological properties of concentrated silicon aqueous suspension10.1016/j.powtec.2005.10.005 ↗
15. Dispersion, slip casting and reaction nitridation of silicon–silicon carbide mixtures10.1016/S0955-2219(99)00019-9 ↗
16. Fabrication and properties of slip-cast silicon nitride
17. Properties of porous Si3N4/BN composites fabricated by RBSN technique10.1111/j.1744-7402.2009.02366.x ↗
18. Properties of silicon suspensions and slip-cast bodies10.1002/9780470320280.ch61 ↗
19. Microstructural changes during argon-sintering of silicon powder compacts10.1007/BF00561993 ↗
20. Kinetics of nitridation of Si powder compacts10.1111/j.1151-2916.1973.tb12529.x ↗
21. Influence of hydrogen in the nitriding gas on the strength, structure and composition of reaction-sintered silicon-nitride10.1007/BF01028330 ↗
22. Mechanism and kinetics of the carbothermal nitridation synthesis of alpha-silicon nitride10.1111/j.1151-2916.1997.tb03203.x ↗
23. A new synthesis method for producing Si3N4 whiskers by heat treating porous Si objects10.1111/j.1551-2916.2008.02721.x ↗
24. Reactions between silicon and nitrogen. Part 2. Microstructure10.1007/BF01111917 ↗
25. The formation of nitrides on pure silicon surfaces
26. Nitridation of high-purity silicon10.1111/j.1151-2916.1976.tb10966.x ↗
27. A mechanism for the nitridation of silicon powder compacts10.1007/BF00570392 ↗
28. The development of strength in reaction sintered silicon nitride10.1007/BF00540282 ↗