journal article·2016-09

Reduced graphene oxide anchored with δ-MnO2 nanoscrolls as anode materials for enhanced Li-ion storage

Hongdong Liu, Zhongli Hu, Liangliang Tian, Yongyao Su, Haibo Ruan, Lei Zhang, Rong Hu

Ceramics International· Volume 42· Issue 12
Publisher page

Abstract

We developed a one-pot in situ synthesis procedure to form nanocomposite of reduced graphene oxide (RGO) sheets anchored with 1D δ-MnO2 nanoscrolls for Li-ion batteries. The as-prepared products were characterized by X-ray diffraction (XRD), Raman spectra, X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). The electrochemical performance of the δ-MnO2 nanoscrolls/RGO composite was measured by galvanostatic charge/discharge cycling and electrochemical impedance spectroscopy. The results show that the δ-MnO2 nanoscrolls/RGO composite displays superior Li-ion battery performance with large reversible capacity and high rate capability. The first discharge and charge capacities are 1520 and 810 mAh g−1, respectively. After 50 cycles, the reversible discharge capacity is still maintained at 528 mAh g−1 at the current density of 100 mAh g−1. The excellent electrochemical performance is attributed to the unique nanostructure of the δ-MnO2 nanoscrolls/RGO composite, the high capacity of MnO2 and superior electrical conductivity of RGO.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. A green hydrothermal approach for the preparation of graphene/alpha-MnO2 3D network as anode for lithium ion battery10.1016/j.electacta.2013.07.002 ↗
2. Scalable synthesis of Fe3O4 nanoparticles anchored on graphene as a high-performance anode for lithium ion batteries10.1016/j.jssc.2012.12.021 ↗
3. Si nanoparticles/graphene composite membrane for high performance silicon anode in lithium ion batteries10.1016/j.carbon.2015.11.031 ↗
4. Preparation of three-dimensional nanoporous Si using dealloying by metallic melt and application as a lithium-ion rechargeable battery negative electrode10.1016/j.jpowsour.2015.11.079 ↗
5. Nano-Sn embedded in expanded graphite as anode for lithium ion batteries with improved low temperature electrochemical performance10.1016/j.electacta.2015.11.015 ↗
6. One-step thermolysis synthesis of two-dimensional ultrafine Fe3O4 particles/carbon nanonetworks for high-performance lithium-ion batteries10.1039/C5NR06843F ↗
7. Nanoparticle decorated ultrathin porous nanosheets as hierarchical Co3O4 nanostructures for lithium ion battery anode
8. General synthesis of MnOx (MnO2, Mn2O3, Mn3O4, MnO) hierarchical microspheres as lithium-ion battery anodes10.1016/j.electacta.2015.10.037 ↗
9. Electrochemically Alternating voltage induced Mn3O4/graphite powder composite with enhanced electrochemical performances for lithium-ion batteries10.1016/j.electacta.2014.12.170 ↗
10. Freeze-drying growth of Co3O4/N-doped reduced graphene oxide nanocomposite as excellent anode material for lithium-ion batteries10.1016/j.ceramint.2015.10.040 ↗
11. Hollow nitrogen-doped Fe3O4/carbon nanocages with hierarchical porosities as anode materials for lithium-ion batteries10.1016/j.electacta.2015.10.134 ↗
12. A new approach towards the synthesis of nitrogen-doped graphene/MnO2 hybrids for ultralong cycle-life lithium ion batteries10.1039/C4TA07208A ↗
13. Nanostructured alkali cation incorporated delta-MnO2 cathode materials for aqueous sodium-ion batteries10.1039/C5TA00396B ↗
14. Interfacial synthesis of delta-MnO2 nano-sheets with a large surface area and their application in electrochemical capacitors10.1016/j.jmst.2015.08.003 ↗
15. One pot low-temperature growth of hierarchical delta-MnO2 nanosheets on nickel foam for supercapacitor applications10.1016/j.electacta.2015.02.089 ↗
16. A layered delta-MnO2 nanoflake cathode with high zinc-storage capacities for eco-friendly battery applications10.1016/j.elecom.2015.08.019 ↗
17. Layered delta-MnO2 as positive electrode for lithium intercalation10.1016/j.matlet.2011.01.073 ↗
18. Flower-like SnO2/graphene composite for high-capacity lithium storage10.1016/j.apsusc.2012.01.119 ↗
19. Preparation of graphitic oxide10.1021/ja01539a017 ↗
20. Improved storage capacity and rate capability of Fe3O4-graphene anodes for lithium-ion batteries10.1016/j.electacta.2011.09.008 ↗
21. Fabrication of Fe3O4@reduced graphene oxide composite via novel colloid electrostatic self-assembly process for removal of contaminants from water10.1039/C4TA04297B ↗
22. High rate capability and long cycle stability Fe3O4-graphene nanocomposite as anode material for lithium ion batteries10.1016/j.jallcom.2012.09.115 ↗
23. Co-electrodeposition of MnO2/graphene oxide coating on carbon paper from phosphate buffer and the capacitive properties10.1007/s10008-013-2291-0 ↗
24. Graphene-wrapped MnO2-graphene nanoribbons as anode materials for high-performance lithium ion batteries10.1002/adma.201302915 ↗
25. Synthesis of 3D hierarchical Fe3O4/graphene composites with high lithium storage capacity and for controlled drug delivery10.1021/jp204502n ↗
26. In situ assembly of MnO2 nanowires/graphene oxide nanosheets composite with high specific capacitance10.1016/j.electacta.2013.11.036 ↗
27. Nitrogen and sulfur dual-doped graphene sheets as anode materials with superior cycling stability for lithium-ion batteries10.1016/j.electacta.2015.10.026 ↗
28. Controlled fabrication of high-quality carbon nanoscrolls from monolayer graphene10.1021/nl900677y ↗
29. Fabrication and lithium storage properties of MnO2 hierarchical hollow cubes10.1016/j.jallcom.2015.09.079 ↗