journal article·2016-10

Properties of cement–sand-based piezoelectric composites with carbon nanotubes modification

Ping Zhao, Shifa Wang, Alec Kadlec, Zhaodong Li, Xudong Wang

Ceramics International· Volume 42· Issue 13
Publisher page

Abstract

Abstract Carbon nanotubes (CNTs) were dispersed in a cement–sand-based piezoelectric composite as conductive fillers to improve its poling efficiency. Specimens were prepared by mixing PZT powders, cement and sand with CNTs. The effect of CNTs ranging from 0 to 0.9 vol% on properties of the composite, including its piezoelectric coefficient, dielectric constant and loss, and sensing characteristic, were characterized. It was found that the addition of CNTs facilitated effective poling under a low electric field of 1 MV/m at room temperature and improved the piezoelectric and dielectric properties of the composite. The composite modified by CNTs achieved optimal properties when the CNTs content was 0.6 vol% and this was verified by the investigation of sensing effects of the composite through compressive tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Acoustic Wave Phenomena Research · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Cement-based 0–3 piezoelectric composites10.1111/j.1151-2916.2002.tb00089.x ↗
2. Influence of polarization on properties of 0–3 cement-based PZT composites10.1016/j.cemconcomp.2004.02.001 ↗
3. Effect of forming pressures on electric properties of piezoelectric ceramic/sulphoaluminate cement composites10.1016/j.compscitech.2006.03.035 ↗
4. High piezoelectricity 0–3 cement-based piezoelectric composites10.1016/j.matlet.2012.02.094 ↗
5. Cement-based piezoelectric ceramic smart composites10.1016/j.compscitech.2004.12.006 ↗
6. Fabrication and piezoelectricity of 0–3 cement based composite with nano-PZT powder10.1016/j.cap.2008.05.005 ↗
7. Effect of PZT particle size on dielectric and piezoelectric properties of PZT-cement composites10.1016/j.cap.2006.11.036 ↗
8. Dielectric and piezoelectric properties of PZT-cement composites10.1016/j.cap.2006.10.015 ↗
9. Properties 0–3 PZT-Portland cement composites10.1016/j.ceramint.2007.09.027 ↗
10. Piezoelectric properties of 0–3 PZT/sulfoaluminate cement composites10.1088/0964-1726/13/2/004 ↗
11. Poling process and piezoelectric properties of lead zironate titanate/sulphoaluminate cement composites
12. Fabrication and properties of PZT-ordinary Portland cement composites10.1016/j.matlet.2007.04.031 ↗
13. Effect of compressive stress on the ferroelectric hysteresis behavior in 0–3 PZT-cement composites10.1016/j.matlet.2009.11.050 ↗
14. Preparation and polarization of 0–3 cement based piezoelectric composites10.1016/j.materresbull.2005.08.026 ↗
15. Mazur · 1995
16. Jaffe · 2012
17. Effect of temperature on structural quality of the cement paste and high-strength concrete with silica fume10.1016/j.nucengdes.2005.05.011 ↗
18. Influence of carbon black on properties of PZT-cement piezoelectric composites10.1177/0021998310371550 ↗
19. Piezoelectric and dielectric behavior of 0–3 cement-based composites mixed with carbon black10.1016/j.jeurceramsoc.2008.11.014 ↗
20. Effect of carbon black on properties of 0–3 piezoelectric ceramic/cement composites10.1016/j.cap.2009.01.011 ↗
21. Effect of carbon addition on the ferroelectric hysteresis properties of lead zirconate titanate ceramic-cement composites10.1016/j.ceramint.2010.11.037 ↗
22. Preparation and properties of cement based piezoelectric composites modified by CNTs10.1016/j.cap.2010.10.021 ↗
23. Investigation of cement-sand-based piezoelectric composites
24. Fabrication of piezoresistive CNT/CNF cementitious composites with superplasticizer as dispersant10.1061/(ASCE)MT.1943-5533.0000435 ↗
25. A review and analysis of electrical percolation in carbon nanotube polymer composites10.1016/j.compscitech.2008.06.018 ↗
26. Carbon nanotube-polymer composites: chemistry, processing, mechanical and electrical properties10.1016/j.progpolymsci.2009.09.003 ↗