journal article·2018-01

Alumina composite coatings with enhanced high-temperature electrical insulating properties on Ni-based superalloy substrates

Xiaohui Zhao, Ziliang Liu, Yang Liu, Hongchuan Jiang, Wanli Zhang

Ceramics International· Volume 44· Issue 1
Publisher page

Abstract

Abstract Electrical insulation of nickel-based superalloy substrate, especially at high temperature range, is one of the major challenges for the reliability and stability of the integrated thin-film sensors. Here, we report a solution-processed approach to fabricating high-temperature, electrically insulating coatings on Ni-based superalloy substrates. NiCrAlY coatings were fabricated by DC magnetron sputtering and heat-treated, and then Al 2 O 3 films were deposited by sol-gel method. X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy were used to characterize the composition, phase, microstructure and morphology of these composite coatings. The electrical resistance of the composite coating was measured as a function of temperature up to 800 °C. Electrical resistance greater than 1 MΩ were consistently achieved from 600 °C to 800 °C. Moreover, this insulating coating survived thermal shock and thermal fatigue tests without cracking or delaminating. A type S thin-film thermocouple was prepared on the composite coating to verify its high-temperature electrical insulation performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor Technologies Research · Scientific Measurement and Uncertainty Evaluation · Calibration and Measurement Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Thin-film thermocouples and strain-gauge technologies for engine applications10.1016/S0924-4247(97)01683-X ↗
2. Metallic and ceramic thin film thermocouples for gas turbine engines10.3390/s131115324 ↗
3. Annealing effects in ITO based ceramic thin film thermocouples10.1016/j.jallcom.2016.12.234 ↗
4. Functional validation of K-Type (NiCr-NiMn) thin film thermocouple on low pressure turbine nozzle guide vane (LPT NGV) of gas turbine engine10.1007/s40799-016-0162-1 ↗
5. Preparation, characterization and application of high-temperature Al2O3 insulating film10.1016/j.surfcoat.2016.02.056 ↗
6. Characterization of transient oxide formation on CoNiCrAlY after heat treatment in vacuum and air10.1016/j.surfcoat.2010.07.079 ↗
7. Studies on optical and dielectric properties of Al2O3 thin films prepared by electron beam evaporation and spray pyrolysis method10.1016/j.mseb.2003.09.036 ↗
8. The electrical and morphological properties of magnesium oxide/alumina bilayered thin films prepared by electron beam evaporation at oblique incidence10.1016/j.apsusc.2013.12.030 ↗
9. Chemical vapor deposition of alpha aluminum oxide for high-temperature aerospace sensors10.1116/1.582401 ↗
10. Properties of SiO2 and Al2O3 films for electrical insulation applications deposited by reactive pulse magnetron sputtering10.1016/S0257-8972(03)00384-0 ↗
11. Ceramic sol-gel composite coatings for electrical insulation10.1016/S0040-6090(01)01322-0 ↗
12. Characteristics of sol-gel deposited alumina films10.1016/j.jallcom.2010.03.219 ↗
13. Sol-gel fabrication of compact, crack-free alumina film10.1016/j.materresbull.2006.08.005 ↗
14. Preparation and dielectric properties of dense and amorphous alumina film by sol–gel technology10.1016/j.ceramint.2013.03.016 ↗
15. Microstructure evolution and thermoelectric property of Pt-PtRh thin film thermocouples10.3390/cryst7040096 ↗