Enhanced toughness and reliability of Si3N4-SiCw composites under oscillatory pressure sintering
Source abstract
Abstract
Abstract We reported an oscillatory pressure sintering (OPS) process to consolidate Si3N4-SiCw composites. For comparison, the composites were also prepared by hot pressing (HP) method. The specimen by OPS process reveals an accelerated rate of grain growth in the c axial direction and thus an increased average aspect ratio compared with the specimen by HP process. The oscillatory pressure also performs a positive impact on the Si3N4-SiCw composites as the bulk density of the OPS specimen increases to 3.270 g cm−3 accompanied with higher fracture strength and hardness of 1133 MPa and 16.1 GPa, respectively, compared with those of the HP specimen. Significantly, the increased fracture toughness and Weibull modulus found in the OPS specimen indicate toughening effects and material reliability are improved aided by the oscillatory pressure. Current results suggest OPS to be a promising technique for preparing highly densified Si3N4-SiCw composites with enhanced mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Silicon nitride and related materials10.1111/j.1151-2916.2000.tb01182.x ↗
2. Microstructure and mechanical performance of silicon nitride ceramics with seeds addition10.3724/SP.J.1077.2012.11555 ↗
3. Silicon nitride: the engineering material of the future10.1007/s10853-011-5942-5 ↗
4. Mechanical properties of silicon nitride-based ceramics and its use in structural applications at high temperatures10.1016/j.msea.2009.09.064 ↗
5. Si3N4-SiCw composites as structural materials for cryogenic application10.1016/j.jeurceramsoc.2016.04.019 ↗
6. Korean, Optical, mechanical and tribological properties of boron nitride dispersed silicon nitride ceramics
7. Microstructure and fracture toughness of Si3N4 + graphene platelet composites10.1016/j.jeurceramsoc.2012.04.022 ↗
8. Elastic properties of silicon nitride ceramics reinforced with graphene nanofillers10.1016/j.matdes.2015.08.044 ↗
9. R-curve behavior of silicon nitride ceramic reinforced with silicon carbide platelets10.1111/j.1151-2916.1998.tb02606.x ↗
10. Silicon carbide whisker reinforced silicon carbide composites by chemical vapor infiltration10.1016/j.msea.2006.05.050 ↗
11. Fabrication and mechanical properties of SiC reinforced reaction-bonded silicon nitride based ceramics10.1016/j.ceramint.2013.09.017 ↗
12. Microstructure and properties of particle reinforced silicon carbide and silicon nitride ceramic matrix composites prepared by chemical vapor infiltration10.1016/j.msea.2007.04.031 ↗
13. Properties of hot-pressed of SiC/Si3N4 nanocomposites10.1016/j.msea.2007.01.126 ↗
14. Influence of graphite additives on wear properties of hot pressed Si3N4 ceramics10.2109/jcersj.114.1061 ↗
15. Tribological properties of Si3N4/SiC nano–nano composite ceramics10.1111/j.1551-2916.2011.04847.x ↗
16. A novel oscillatory pressure-assisted hot pressing for preparation of high-performance ceramics10.1111/jace.12869 ↗
17. Enhanced properties of pure alumina ceramics by oscillatory pressure sintering10.1016/j.ceramint.2017.12.133 ↗
18. Sintering of high-performance silicon nitride ceramics under vibratory pressure10.1111/jace.13486 ↗
19. An oscillatory pressure sintering of zirconia powder: rapid densification with limited grain growth10.1111/jace.14953 ↗
20. An oscillatory pressure sintering of zirconia powder: densification trajectories and mechanical properties10.1111/jace.15399 ↗
21. Microstructure and mechanical properties of ZTA composites fabricated by oscillatory pressure sintering10.1016/j.ceramint.2017.09.204 ↗
22. Experimental probability estimators for Weibull plots10.1007/BF01729379 ↗
23. High aspect ratio β- Si3N4 grain growth10.1016/S0955-2219(99)00201-0 ↗
24. Effect of grain width and aspect ratio on mechanical properties of Si3N4 ceramics10.1007/s10853-006-0826-9 ↗
25. Effect of grain growth of β-silicon nitride on strength, weibull modulus, and fracture toughness10.1111/j.1151-2916.1993.tb06670.x ↗
26. Microstructural design of silicon nitride with improved fracture toughness: I, effects of grain shape and size10.1111/j.1151-2916.1998.tb02702.x ↗
27. Relation between microstructure, toughening mechanisms, and fracture toughness of reinforced silicon nitride ceramics10.1111/j.1151-2916.1995.tb08031.x ↗
28. Effect of the grain boundary thermal expansion coefficient on the fracture toughness in silicon nitride10.1111/j.1151-2916.1995.tb08667.x ↗
29. How does crack bridging change at cryogenic temperatures10.1111/jace.13345 ↗