Properties of 3Y-TZP zirconia ceramics with graphene addition obtained by spark plasma sintering
Source abstract
Abstract
In this study the influence of graphene addition on the microstructure, phase composition, mechanical, and electrical properties of 3Y-TZP ceramics was investigated. Blends of pure 3Y-TZP and with addition of 1 − 4 vol% graphene were prepared by mixing and milling, and they were consolidated by spark plasma sintering (SPS). Addition of 3 vol% graphene is necessary to overcome the percolation threshold and obtain electrically conductive composites. However, rising the graphene contents obstructs sinterability. Hence, flexural strength, Young's modulus, and hardness decrease with increasing the graphene content, and the fracture resistance reaches an intermediate maximum at 2 vol% graphene. Graphene lamellae are oriented orthogonally to the pressing direction. They evidently provide some energy dissipation by crack deflection. TZP-graphene interfaces are very weak. Thus, crack bridging can be neglected. © 2018 Elsevier Ltd and Techna Group S.r.l.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Transformation toughening in zirconia-containing ceramics10.1111/j.1151-2916.2000.tb01221.x ↗
2. The martensitic transformation of ceramics – its role in transformation toughening10.1016/S0079-6425(00)00005-0 ↗
3. Thermodynamic model of the cubic - tetragonal transition in nonstoichiometric zirconia10.1111/j.1151-2916.1991.tb07823.x ↗
4. Strength and fracture toughness of isostatically hot-pressed composites of Al2O3 and Y2O3-partially-stabilized ZrO210.1111/j.1151-2916.1985.tb15251.x ↗
5. Alumina toughened zirconia from yttria coated powders10.1016/j.jeurceramsoc.2012.03.014 ↗
6. Wire-electrical discharge machinable alumina zirconia niobium carbide composites – Influence of NbC content10.1016/j.jeurceramsoc.2017.07.014 ↗
7. Electrical discharge machining of metal doped Y-TZP/TiC nanocomposites10.1016/j.jeurceramsoc.2015.05.008 ↗
8. Pulsed electric current sintering of electrically conductive ceramics10.1007/s10853-008-2631-0 ↗
9. Development of ZrO2-WC composites by pulsed electric current sintering10.1016/j.jeurceramsoc.2006.11.079 ↗
10. Investigation of material removal mechanisms in EDM of composite ceramic materials10.1016/j.jmatprotec.2004.02.013 ↗
11. Percolation and tunneling in composite materials10.1142/S0217979204025336 ↗
12. Conductive polymer nanocomposites with hierarchical multi-scale structures via self-assembly of carbon-nanotubes on graphene on polymer-microspheres10.1039/C3NR06056J ↗
13. Dense graphene nanoplatelet/yttria tetragonal zirconia composites: processing, hardness and electrical conductivity10.1016/j.ceramint.2017.06.007 ↗
14. Toughened and strengthened silicon carbide ceramics by adding graphene-based fillers10.1016/j.scriptamat.2015.10.023 ↗
15. Graphene reinforced alumina nano-composites10.1016/j.carbon.2013.07.086 ↗
16. On the Vickers indentation fracture toughness test10.1111/j.1551-2916.2006.01482.x ↗
17. Enhanced toughness of zirconia ceramics with graphene platelets consolidated by spark plasma sintering10.1111/ijac.12742 ↗
18. Influence of preparation of ceramic SEVNB specimens on fracture toughness testing results10.1016/j.dental.2007.06.021 ↗
19. Recent progress in graphene based ceramic composites: a review10.1557/jmr.2016.390 ↗
20. Panten, U. Funkenerosive Bearbeitung von elektrisch leitfähigen Keramiken; PhD Thesis, RWTH Aachen, 1990.
21. Fracture toughness determinations by indentation10.1111/j.1151-2916.1976.tb10991.x ↗
22. A critical evaluation of indentation techniques for measuring fracture toughness: I direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
23. A fracture mechanics analysis of indentation-induced Palmqvist crack in ceramics10.1007/BF00725625 ↗
24. A critical evaluation of indentation techniques for measuring fracture toughness: ii Strength method10.1111/j.1151-2916.1981.tb10321.x ↗
25. Toughening of zirconia/alumina composites by the addition of graphene platelets10.1016/j.jeurceramsoc.2012.07.007 ↗
26. Field assisted sintering of graphene reinforced zirconia ceramics10.1016/j.ceramint.2014.12.147 ↗
27. Trapped cracks at indentations Part I experiments on yttria-tetragonal zirconia polycrystals
28. Thermodynamic modeling of the ZrO2–YO1.5 system10.1016/j.ssi.2004.02.017 ↗
29. Cubic-formation and grain-growth mechanisms in tetragonal zirconia polycrystal10.1111/j.1151-2916.2003.tb03483.x ↗
30. ED-machinable ceramics with oxide matrix: influence of particle size and volume fraction of the electrical conductive phase on the mechanical and electrical properties and the EDM characteristics10.1016/j.procir.2017.12.016 ↗