Synthesis of Y2BaCuO5 nano-whiskers by a solution blow spinning technique and their successful introduction into single-grain, YBCO bulk superconductors
Source abstract
Abstract
The ability of single grain Y-Ba-Cu-O (YBCO) bulk superconductors to trap large magnetic fields is due generally to the presence of embedded, non-superconducting Y2BaCuO5 (Y-211) phase particles, in optimum amount, in the superconducting YBa2Cu3O7-δ (Y-123) phase matrix, which increases flux pinning and, hence, critical current density of the bulk material. The presence of smaller particles of Y-211 could be expected to improve further the superconducting properties of single grain, bulk YBCO samples, although the smallest Y-211 particles that have been engineered to date within the bulk microstructure are around 800 nm in size. It is extremely challenging to reduce the Y-211 particle size any further due to problems of particle agglomeration that originate, inevitably, from the effects of surface energy and reactivity at relatively high processing temperatures. In this work, we report a novel approach to the fabrication of Y-211 pinning centres in bulk YBCO superconductors in the form of nano-whiskers manufactured by a solution blow spinning technique. The Y-211 nano-whiskers, of which 62% were smaller than 500 nm, were added to the YBCO precursor powders to produce a single grain bulk sample by the buffer-aided top-seeded melt growth (BA-TSMG) processing technique. The resulting YBCO single grain, of diameter 20 mm, was able to trap a magnetic field of 0.63 T at 77 K with an associated critical current density of 3.9 X 104 A/cm2 in self-field. The results of this study demonstrate clearly that the use of Y-211 nano-whiskers is a promising route for enhancing flux pinning in bulk YBCO single-grains, which is potentially significant for the development of high field engineering applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Physics of Superconductivity and Magnetism · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Processing and properties of large grain (RE)BCO10.1016/S0921-5107(97)00293-6 ↗
2. A trapped field of 17.6 T in melt-processed, bulk Gd–Ba–Cu–O reinforced with shrink-fit steel10.1088/0953-2048/27/8/082001 ↗
3. Bulk high temperature superconductors for magnet applications10.1016/S0011-2275(97)00068-4 ↗
4. Novel application of high Tc bulk superconductors10.1016/0964-1807(93)90424-Z ↗
5. Fujimoto · 1992
6. Krabbes · 2006
7. Macrosegregation of Y2Ba1Cu1O5 particles in Y1Ba2Cu3O7−δ crystals grown by an undercooling method10.1557/JMR.1996.0096 ↗
8. Control of Y-211 content in bulk YBCO superconductors fabricated by a bufferaided, top seeded infiltration and growth melt process10.1088/0953-2048/29/3/034007 ↗
9. An improved top seeded infiltration growth method for the fabrication of Y–Ba–Cu–O bulk superconductors10.1016/j.jeurceramsoc.2015.09.036 ↗
10. Crystal growth of bulk high-Tc superconducting oxide materials10.1016/S0927-796X(96)00198-2 ↗
11. The effect of Y-211 precursor particle size on the microstructure and properties of Y–Ba–Cu–O bulk superconductors fabricated by seeded infiltration and growth10.1088/0953-2048/19/8/005 ↗
12. The influence of slow cooling on Y211 size and content in single-grain YBCO bulk superconductor through the infiltration-growth process10.1016/j.physc.2017.01.003 ↗
13. Optimization of Y2BaCuO5 phase morphology for the growth of large bulk YBCO grains10.1557/JMR.1995.2241 ↗
14. The influence of Y-211 content on the growth rate and Y-211 distribution in Y–Ba–Cu–O single grains fabricated by top seeded melt growth10.1021/cg501135q ↗
15. Nanoscale Y2BaCuO5 particles for producing melt-textured YBCO large grains10.1088/0953-2048/19/6/029 ↗
16. Effect of Y-211 particle size on the growth of single grain Y–Ba–Cu–O bulk superconductors10.1016/j.jcrysgro.2014.11.037 ↗
17. Reduction of Y2BaCuO5 particle size in melt-textured YBa2Cu3Oy crystals10.1016/S0921-4534(00)00069-1 ↗
18. Synthesis of ultrafine Y2BaCuO5 powder and its incorporation into YBCO bulk by powder melting process10.1016/S0921-4534(01)00624-4 ↗
19. High critical current density in RE–Ba–Cu–O bulk superconductors with very fine RE2BaCuO5 particles10.1016/j.physc.2004.01.078 ↗
20. From RE-211 to RE-123. How to control the final microstructure of superconducting single-domains10.1088/0953-2048/18/3/R01 ↗
21. Synthesis of YBa2Cu3O7−δ and Y2BaCuO5 nanocrystalline powders for YBCO superconductors using carbon nanotube templates10.1021/nn301262t ↗
22. The effect of platinum additions on Y2BaCuO5 precipitation and coarsening during melt texturing of YBa2Cu3O7-δ10.1088/0953-2048/10/8/009 ↗
23. Effects of Pt doping on the size distribution and uniformity of Y2BaCuO5 particles in large-grain YBCO10.1088/0953-2048/11/4/004 ↗
24. Piñol · Appl. Phys. Lett. · 1994 · 65 · 144810.1063/1.112011 ↗
25. New method of producing fine Y2BaCuO5 in the melt-textured Y-Ba-Cu-O system: attrition milling of YBa2Cu3Oy-Y2BaCuO5 powder and CeO2 addition prior to melting10.1088/0953-2048/8/8/009 ↗
26. Refinement mechanism of CeO2 addition on Y2BaCuO5 particles in PMP YBCO bulks10.1016/S0921-4534(01)00915-7 ↗
27. Ravikumar · 2012 · 2012 · 261
28. Impurity effects on the superconducting coherence length in Zn- or Ni-doped YBa2Cu3O6.9 single crystals10.1103/PhysRevB.60.114 ↗
29. Magnetoresistance of Untwinned YBa2Cu3Oy single crystals in a wide range of doping: anomalous hole-doping dependence of the coherence length10.1103/PhysRevLett.88.167005 ↗
30. Solution blow spinning: a new method to produce micro- and nanofibers from polymer solutions10.1002/app.30275 ↗
31. YBCO ceramic nanofibers obtained by the new technique of solution blow spinning10.1016/j.ceramint.2016.07.152 ↗
32. Buffer pellets for high-yield, top-seeded melt growth of large grain Y–Ba–Cu–O superconductors10.1021/cg501813y ↗
33. A new seeding technique for the reliable fabrication of large, SmBCO single grains containing silver using top seeded melt growth10.1088/0953-2048/28/3/035014 ↗
34. Magnetic shielding above 1 T at 20 K with bulk, large grain YBCO tubes made by buffer-aided top seeded melt growth10.1109/TASC.2016.2633301 ↗
35. Processing and properties of bulk Y–Ba–Cu–O superconductors fabricated by top seeded melt growth from precursor pellets containing a graded CeO2 composition10.1021/cg501724y ↗
36. Advantages of multi-seeded (RE)–Ba–Cu–O superconductors for magnetic levitation applications10.1088/1361-6668/aad4f1 ↗
37. The successful incorporation of Ag into single grain, Y–Ba–Cu–O bulk superconductors10.1088/1361-6668/aaa831 ↗
38. A robust seeding technique for the growth of single grain (RE)BCO and (RE)BCO-Ag bulk superconductors10.1088/1361-6668/aaad89 ↗
39. Kim model for magnetization of type-II superconductors10.1063/1.344261 ↗