Ta addition effects on the structure, mechanical and thermal properties of sputtered Hf-Ta-C film
Source abstract
Abstract
Abstract Transition metal carbides (TMCs) hold great promise for protective coatings due to their excellent mechanical properties, however, developing hard yet tough TMC-based materials against harsh environment continues to be a great need but challenge, as high hardness is often obtained with toughness deterioration. Here, we focus on HfC film modification with Ta addition (10.2–26.8 at.%) using magnetron co-sputtering system, particularly, two types phase structures (cubic Hf(Ta)C single-phase solid solution and mixed phase Hf-Ta-C structure (HfC + TaC mixture), respectively) are prepared for comparison and explanation. Mechanical tests reveal that the Hf(Ta)C solid solution film exhibits the highest hardness (36 ± 0.51 GPa), which is far beyond pure HfC and TaC reference, and is nearly two times higher than the film with mixed phase of TaC and HfC. Simultaneously, excellent fracture toughness with high Kf value at 3.6 MPa m1/2 can be achieved in such a solid solution film, on account of high hardness/elasticity modulus ratio. All films exhibit low friction coefficient at∼0.3 when C lubrication medium occurs, the lubrication behavior surpasses corresponding nitrides film. After high-temperature annealing at 800 °C, the Hf(Ta)C solid solution film is found to perform better in terms of thermal stability and oxidation resistance, while structural destruction and obvious oxidation occur in other reference films. We therefore give the potential advantage of solid solution structure (relative to mixed phase structure) in regulating high-performance TMC-based protective coatings, which is fundamental but very practical for other material systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Toughness enhancement and tribochemistry of the Nb-Ag-N films actuated by solute Ag10.1016/j.actamat.2017.07.034 ↗
2. Strength and toughness: the challenging case of TaC-based composites10.1016/j.compositesb.2014.11.043 ↗
3. Initial adsorption of water molecule on HfC and TaC (0 0 1) surfaces from density-functional study10.1016/j.apsusc.2013.10.182 ↗
4. Pressureless sintering of Ta0. 8Hf0. 2C UHTC in the presence of MoSi210.1016/j.ceramint.2012.08.050 ↗
5. Ablation tests on HfC-and TaC-based ceramics for aeropropulsive applications10.1016/j.jeurceramsoc.2014.11.018 ↗
6. Microstructure and mechanical properties of ZrC-TaCx composite fabricated by displacive compensation of porosity at 1300° C10.1016/j.ceramint.2017.09.165 ↗
7. HfC/ZrC ablation protective coating for carbon/carbon composites10.1016/j.corsci.2013.06.042 ↗
8. Optimizing the tribological behavior of tantalum carbide coating for the bearing in total hip joint replacement10.1016/j.vacuum.2018.01.050 ↗
9. Evaluation of phase, composition, microstructure and properties in TiC/a-C: H thin films deposited by magnetron sputtering10.1016/j.apsusc.2004.05.278 ↗
10. Structure, mechanical and tribological properties of HfCx films deposited by reactive magnetron sputtering10.1016/j.apsusc.2014.11.130 ↗
11. Preparation, properties and structure of metal containing amorphous hydrogenated carbon films10.1080/10426919308934846 ↗
12. Electronic structure and mechanical properties of ternary ZrTaN alloys studied by ab initio calculations and thin-film growth experiments10.1103/PhysRevB.90.144107 ↗
13. Vacancy-induced toughening in hard single-crystal V0.5Mo0.5Nx/MgO (001) thin films10.1016/j.actamat.2014.06.025 ↗
14. Epitaxial Ti1-xWxN alloys grown on MgO (001) by ultrahigh vacuum reactive magnetron sputtering: electronic properties and long-range cation ordering10.1116/1.1525818 ↗
15. Deposition and characterization of refractory ternary phases: the transition metal nitride Ti1− xMoxNy10.1016/S0257-8972(96)02953-2 ↗
16. Reactive magnetron cosputtering of hard and conductive ternary nitride thin films: Ti–Zr–N and Ti–Ta–N10.1116/1.3426296 ↗
17. Manufacture, microstructure and mechanical properties of Mo–W–N nanostructured hard films10.1016/j.materresbull.2009.06.013 ↗
18. Thermal stability, microstructure and mechanical properties of Ti1− xZrxN thin films10.1016/j.tsf.2007.12.133 ↗
19. Improving electrical conductivity and wear resistance of hafnium nitride films via tantalum incorporation10.1016/j.ceramint.2017.04.003 ↗
20. Phase formation and microstructure in sputter-deposited Ti-Mo-C and Ti-W-C thin films10.1007/s11661-002-0168-4 ↗
21. Phase, hardness, and deformation slip behavior in mixed HfxTa1-xC10.1016/j.actamat.2017.11.038 ↗
22. Extensions of the Stoney formula for substrate curvature to configurations with thin substrates or large deformations10.1063/1.123722 ↗
23. Influence of Si content on the microstructure and mechanical properties of VSiN films deposited by reactive magnetron sputtering10.1016/j.vacuum.2016.05.030 ↗
24. In situ neutron diffraction of heavily drawn steel wires with ultra-high strength under tensile loading10.1016/j.actamat.2004.10.003 ↗
25. Small atoms as reinforced agent for both hardness and toughness of Group-VIB transition metal films10.1016/j.jallcom.2017.11.208 ↗
26. On the application of the work of indentation approach to depth sensing indentation experiments in coated systems10.1016/S0257-8972(00)01063-X ↗
27. Microstructure and mechanical properties of hafnium carbide coatings synthesized by reactive magnetron sputtering10.1007/s11998-009-9225-x ↗
28. The roles of Ag layers in regulating strengthening-toughening behavior and tribochemistry of the Ag/TaC nano-multilayer films10.1016/j.apsusc.2018.03.202 ↗
29. Musil · 2015 · 377
30. Hard nanocomposite coatings: thermal stability, oxidation resistance and toughness10.1016/j.surfcoat.2012.05.073 ↗
31. Structure, hardness and mechanical properties of magnetron sputtered titanium aluminium boride films10.1016/S0257-8972(99)00490-9 ↗
32. The effect of boron additions on the tribological behaviour of TiN coatings produced by electron-beam evaporative PVD10.1016/S0257-8972(99)00260-1 ↗
33. Wear of metals10.1007/BF03397325 ↗
34. Anderson · 2004
35. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
36. Valence electron concentration as an indicator for mechanical properties in rocksalt structure nitrides, carbides and carbonitrides10.1016/j.actamat.2018.04.033 ↗
37. Indentation fracture toughness and acoustic energy release in tetrahedral amorphous carbon diamond-like thin films10.1016/j.actamat.2006.05.003 ↗
38. Physical properties and electronic structure of TaC-HfC solid solutions10.1134/S0036023607020155 ↗
39. Cavaleiro · 2007
40. Toward hard yet tough ceramic coatings10.1016/j.surfcoat.2014.07.007 ↗
41. Enhanced oxidation resistance of Ti (C,N) based cermets containing Ta10.1016/j.corsci.2014.03.007 ↗
42. Enhanced mechanical properties and high temperature oxidation resistance of Ti (C,N)based cermets containing Zr10.1016/j.jallcom.2019.02.266 ↗