journal article·2020-07Open access

Preparation and mechanism of active Mo–Mn metallization on ZTA particles surface and interfacial bonding of reinforced iron matrix composite

Shuo Wu, Yang Qin, Daoren Fu, Lei Fan, Huahui Chen, Haiping Hong

Ceramics International· Volume 46· Issue 10

Abstract

Abstract ZrO2 toughened Al2O3 particles (ZTAp) have poor wettability with iron, and therefore some defects are easily formed at the interface between ZTAp and iron matrix, which may lead to material failure. This paper illustrates that the ZTAp were modified on the surface by the active Mo–Mn metallization, and thus, they were used as the reinforcing phases to prepare the iron-matrix composite (ZTAp/Fe composite). It is concluded that the sponge-like skeleton structure was formed on the surface of ZTAp after the metallization. The interface of ZTAp/Fe composite, which has been proved to have bearing and transitional capacity by scratch test, was formed by chemical bonding with elemental diffusion, besides mechanical bonding. The metallization mechanism of elemental diffusion can be explained by the migration of glass phase, and the elements diffusion between the interface and iron matrix is to form solid solution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Core-rim microstructure and properties of WC/Ni composites10.1016/j.ijrmhm.2018.09.007 ↗
2. Effect of particle size distribution on the preparation of ZTA ceramic paste applying for stereolithography 3D printing10.1016/j.powtec.2019.09.066 ↗
3. Fabrication and wear behavior of ZTA particles reinforced iron matrix composite produced by flow mixing and pressure compositing10.1016/j.wear.2019.03.013 ↗
4. Preparation and characterization of an Al2O3–ZrO2 nanocomposite, Part I: Powder synthesis and transformation behavior during fracture10.1016/j.compositesa.2006.01.005 ↗
5. Comparison of properties and impact abrasive wear performance of ZrO2-Al2O3/Fe composite prepared by pressure casting and infiltration casting process10.1016/j.triboint.2019.105979 ↗
6. Numerical analysis of the mechanical behavior of ZTAp/Fe composites10.1016/j.commatsci.2017.05.021 ↗
7. Characterization of interfacial layer of ZTA ceramic particles reinforced iron matrix composites10.1016/j.jallcom.2018.01.199 ↗
8. Preparation of nickel coating on ZTA particles by electroless plating10.1016/j.ceramint.2018.03.055 ↗
9. Wettability and interaction mechanism for Ni-modified ZTA particles reinforced iron matrix composites10.1016/j.jallcom.2019.01.342 ↗
10. Electron probe microanalysis of ceramic‐to‐metal seals10.1111/j.1151-2916.1965.tb14781.x ↗
11. Glass-migration mechanism of ceramic-to-metal seal adherence
12. Gao · 2005
13. Metallizing of high-Al2O3 ceramics
14. Premetallizing of high alumina ceramics10.1016/0390-5519(78)90092-3 ↗
15. Metallographic examination of ceramic-metal seals10.1111/j.1151-2916.1953.tb12856.x ↗
16. High-temperature metallizing - Part 1. The mechanism of glass migration in the production of metal-ceramic seals10.1007/BF01163071 ↗
17. Influence of ceramic substrate porosity and glass phase content on the microstructure and mechanical properties of metallized ceramics via an activated Mo-Mn method10.1016/j.ceramint.2019.12.052 ↗
18. Metallization of Al 2 O 3 ceramic by magnetron sputtering Ti/Mo bilayer thin films for robust brazing to Kovar alloy10.1016/j.ceramint.2016.03.044 ↗
19. Passerone · 1999
20. Preparation of mixed Al 2O 3/SiO 2 thin films supported on Mo (100)10.1016/0039-6028(94)90345-X ↗
21. Synthesis of aluminum oxide thin films: Use of aluminum tris‐dipivaloylmethanate as a new low pressure metal organic chemical vapor deposition precursor10.1063/1.114960 ↗
22. Solid-phase reactions and crystallographic structures in Zr/Si systems10.1063/1.347644 ↗
23. An XPS study of hydrogen implanted zirconium10.1016/0022-5088(87)90562-5 ↗
24. First-principles study on the structural stabilities, electronic and elastic properties of Zr2Si alloy under pressure10.1016/j.commatsci.2012.04.047 ↗
25. Effect of ZrO2 types on ZrSiO4 formation10.1016/j.ceramint.2019.08.048 ↗
26. Low temperature synthesis of a new yellowish brown ceramic pigment based on FeNbO4@ZrSiO410.1016/j.ceramint.2018.04.060 ↗
27. Aluminothermic reduction of ZrSiO4 in the presence of carbon for in situ formation of Zr-based silicides/carbides composites10.1016/j.jallcom.2018.10.130 ↗
28. Material removal mechanism and crack propagation in single scratch and double scratch tests of single-crystal silicon carbide by abrasives on wire saw10.1016/j.ceramint.2018.09.178 ↗
29. Scratch resistance and damage mechanism of laser remelted thermally sprayed ceramic coating10.1016/j.surfcoat.2019.02.078 ↗
30. Electrical oscillations in polypyrrole-lecithin bilayer lipid membranes10.1016/0022-0728(88)87065-7 ↗
31. In situ phase transformation of Laves phase from Chi-phase in Mo-containing Fe–Cr–Ni alloys10.1016/j.matlet.2015.06.018 ↗
32. Analysis of a Ni-Fe-Cr-Mo-Si hardfacing alloy manufactured by laser cladding: influence of the iron content on the wear resistance properties10.1016/j.procir.2018.08.096 ↗