journal article·2021-01

Interface excess on Sb-doped TiO2 photocatalysts and its influence on photocatalytic activity

Henry Gandelman, Andre L. da Silva, Bruno Ramos, Douglas Gouvêa

Ceramics International· Volume 47· Issue 1
Publisher page

Abstract

Abstract Titanium dioxide (TiO2) is a well-known photocatalyst that has been used in photocatalysis and has been studied as an alternative for artificial photosynthesis cells. Many works have tried doping this material with different elements to increase its photoactivity; however, a consequence of doping that has not received much attention is the segregation at the nanoparticle interfaces, such as the surface and the grain boundary (GB). In this study, Sb-doped TiO2 nanoparticles have been produced by the polymeric precursor method, with the compositional range varying from 0 to 2 mol% Sb. The surface excess was measured by the surface lixiviation method, and the GB excess was calculated considering the total amount of Sb and its solubility in the TiO2 bulk. The results showed that Sb interfacial segregation at both surface and GB increased the specific surface areas, reduced the crystallite sizes, increased the presence of the rutile phase, and changed the CO2 adsorption, evidenced by DRIFT spectroscopy. The photoactivity was tested by the degradation of acetaminophen (ACT) under UV irradiation, revealing an increase of ~53% of activity for 0.05 mol% Sb-doped TiO2 compared to undoped TiO2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Yacobi · 2004
2. Review of the recent progress on GaN-based vertical power Schottky barrier diodes (SBDs)
3. Aqueous solution deposition of amorphous gallium tin oxide for thin-film transistors applications10.1016/j.ceramint.2020.05.010 ↗
4. Schubert · 2006
5. Crystallite size effects during the catalytic oxidation of propylene on Pt γ-Al2O310.1016/0021-9517(78)90108-2 ↗
6. Effect of crystallite size on the performance and phase transformation of Co3O4/Al2O3 catalysts during CO-PrOx-an: in situ study10.1039/C6FD00217J ↗
7. Optical and electrical optimization of all-perovskite pin type junction tandem solar cells10.1088/1361-6463/ab8851 ↗
8. Embedded ZnO nanoparticles in N-doped carbon nanoplate arrays grown on N-doped carbon paper as low-cost and lightweight electrodes for high-performance lithium storage10.1016/j.ceramint.2020.04.082 ↗
9. Nanostructured Pr-doped Ceria (PCO) thin films as sensing electrodes in solid-electrolyte type gas sensors with enhanced toluene sensitivity10.1016/j.snb.2020.128037 ↗
10. Invited review paper TiO2 photocatalysis: a historical overview and future
11. On the genesis of heterogeneous photocatalysis: a brief historical perspective in the period 1910 to the mid-1980s10.1039/c2pp25026h ↗
12. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
13. Photoinduced reactivity of titanium dioxide10.1016/j.progsolidstchem.2004.08.001 ↗
14. Fundamentals of zinc oxide as a semiconductor10.1088/0034-4885/72/12/126501 ↗
15. A surface science perspective on TiO2 photocatalysis10.1016/j.surfrep.2011.01.001 ↗
16. ZnO: material, physics and applications10.1002/cphc.200700002 ↗
17. Performance of gas-phase photocatalytic reactors on hydrogen production10.1016/j.ijhydene.2016.05.245 ↗
18. Degradation of emerging pollutants in water under solar irradiation using novel TiO2-ZnO/clay nanoarchitectures10.1016/j.cej.2016.10.002 ↗
19. Treatment of hazardous organic and inorganic compounds through aqueous-phase photocatalysis: a review10.1021/ie0498551 ↗
20. Renewable energy via photocatalysis10.2174/13852728113179990064 ↗
21. Solar energy conversion: from natural to artificial photosynthesis10.1016/j.jphotochemrev.2017.02.001 ↗
22. TiO2 photocatalysis and related surface phenomena10.1016/j.surfrep.2008.10.001 ↗
23. Defect-related photoluminescence and photocatalytic properties of porous ZnO nanosheets10.1039/C4TA02678K ↗
24. Charge carrier trapping, recombination and transfer during TiO2 photocatalysis: an overview10.1016/j.cattod.2018.10.053 ↗
25. Recombination processes at grain boundaries in polycrystalline semiconductors10.1002/pssa.2211000118 ↗
26. Carrier transport through grain boundaries in semiconductors10.1103/PhysRevB.33.3952 ↗
27. Review on modified TiO2 photocatalysis under UV/visible light: selected results and related mechanisms on interfacial charge carrier transfer dynamics10.1021/jp204364a ↗
28. Surface energy effects on the stability of anatase and rutile nanocrystals: a predictive diagram for Nb2O5-doped-TiO210.1016/j.apsusc.2016.09.126 ↗
29. The nanocrystalline SnO2 -TiO2 system-Part I: structural features
30. The nanocrystalline SnO2 -TiO2 system-Part II: surface energies and thermodynamic stability
31. Surface and grain boundary excess of ZnO-doped TiO2 anatase nanopowders10.1016/j.ceramint.2018.03.190 ↗
32. On the thermodynamic stability of nanocrystalline ceramics10.1016/j.matlet.2013.01.007 ↗
33. Simultaneous segregation of lanthanum to surfaces and grain boundaries in MgAl2O4 nanocrystals10.1016/j.apsusc.2020.147145 ↗
34. Yamada
35. Energetics of CO2 and H2O adsorption on alkaline earth metal doped TiO210.1039/D0CP01787F ↗
36. The role of metal ion dopants in quantum-sized TiO2: correlation between photoreactivity and charge carrier recombination dynamics10.1021/j100102a038 ↗
37. Improved photovoltaic performance of dye-sensitized solar cells by Sb-doped TiO2 photoanode10.1016/j.electacta.2012.05.050 ↗
38. Luo
39. Preparation and photocatalytic characteristic of Sb-doped anatase TiO2 powders
40. Surface and grain-boundary excess of ZnO-doped SnO2 nanopowders by the selective lixiviation method10.1111/jace.14973 ↗
41. Quantification of MgO surface excess on the SnO2 nanoparticles and relationship with nanostability and growth10.1016/j.apsusc.2010.12.023 ↗
42. Mixed-cation oxide powders via polymeric precursors
43. Pechini · 1967
44. TiO2 surface engineering to improve nanostability: the role of interface segregation10.1021/acs.jpcc.8b12160 ↗
45. Structural characteristics and mechanical and thermodynamic properties of nanocrystalline TiO210.1021/cr500072j ↗
46. Photocatalytic Nb2O5-doped TiO2 nanoparticles for glazed ceramic tiles10.1016/j.ceramint.2015.12.029 ↗
47. Nyquist · 1997
48. FT-IR surface study of nanosized ceramic materials used as gas sensors
49. Sb-doped titanium oxide: a rationale for its photocatalytic activity for environmental remediation10.1021/acsomega.8b01452 ↗
50. A photoemission study of Sb-doped TiO210.1016/0039-6028(94)90138-4 ↗
51. Evidence of ‘mixed-valency’ character in the X-ray photoelectron spectra of α-diantimony tetraoxide and barium bismuth trioxide10.1039/DT9770001238 ↗
52. Toxic potential of paracetamol to freshwater organisms: a headache to environmental regulators?10.1016/j.ecoenv.2014.05.027 ↗
53. Fenton-like catalysis and oxidation/adsorption performances of acetaminophen and arsenic pollutants in water on a multimetal Cu–Zn–Fe-LDH10.1021/acsami.6b08933 ↗
54. Photoinduced dynamics of TiO2 doped with Cr and Sb10.1021/jp0752264 ↗
55. Correlation between the non-stoichiometry of titanium dioxide and its photoelectrochemical behaviour10.1039/dc9807000081 ↗