Suitability of Biosilicate® glass-ceramic powder for additive manufacturing of highly porous scaffolds
Source abstract
Abstract
Abstract The Biosilicate® glass-ceramic is one of the most promising alternatives to the 45S5 Bioglass® in terms of bioactivity, osteoconductivity, osteoinductivity, non-cytotoxicity, and antibacterial properties, with significant advantages in the manufacturing of specific components of complex shapes for bone tissue application. Unlike in 45S5 glass, the crystallization does not lead to a degradation of bioactivity. In the present paper, we explored the suitability of Biosilicate® for the manufacturing of highly porous scaffolds (porosity of 50–80 vol%) by using modern additive manufacturing technologies, such as direct ink writing (DIW) and digital light processing (DLP). Both techniques could be easily applied to fine powders of Biosilicate® mixed with fugitive binders. Significant densification of the struts, despite the limited powder packing, could be achieved using liquid-assisted sintering, in turn, triggered by the phosphate-enriched residual glass phase, already at 1000 °C. The strength-to-density ratio could be variously tuned (from 1.5 to 9.5 MPa cm3/g), especially with DLP-derived samples, by adjusting both the firing temperature and the scaffold topology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Scaffolds for bone tissue engineering: state of the art and new perspectives10.1016/j.msec.2017.05.017 ↗
2. Advances in additive manufacturing for bone tissue engineering scaffolds10.1016/j.msec.2019.03.037 ↗
3. Three-dimensional (3D) printed scaffold and material selection for bone repair10.1016/j.actbio.2018.11.039 ↗
4. 3D printing of bone tissue engineering scaffolds10.1016/j.bioactmat.2020.01.004 ↗
5. Porous scaffolds for bone regeneration
6. 3 D bioprinting of stem cells and polymer/bioactive glass composite scaffolds for bone tissue engineering10.18063/IJB.2017.01.005 ↗
7. Hardystonite bioceramics from preceramic polymers10.1016/j.jeurceramsoc.2015.10.034 ↗
8. Bioactive glass-ceramic foam scaffolds from ‘inorganic gel casting’ and sinter-crystallization10.3390/ma11030349 ↗
9. 3D bioactive composite scaffolds for bone tissue engineering10.1016/j.bioactmat.2017.10.001 ↗
10. Additive manufacturing for bone tissue engineering scaffolds
11. 3D bioprinting of functional tissue models for personalized drug screening and in vitro disease modeling10.1016/j.addr.2018.06.011 ↗
12. Advanced biomaterials for repairing and reconstruction of mandibular defects10.1016/j.msec.2019.109858 ↗
13. Regenerating bone with bioactive glass scaffolds: a review of in vivo studies in bone defect models10.1016/j.actbio.2017.08.030 ↗
14. The effect of residual glassy phase in a bioactive glass-ceramic on the formation of its surface apatite layer in vitro10.1007/BF00701242 ↗
15. Effect of crystallization on apatite-layer formation of bioactive glass 45S510.1002/(SICI)1097-4636(199604)30:4<509::AID-JBM9>3.0.CO;2-T ↗
16. Biosilicate®-A multipurpose, highly bioactive glass-ceramic. In vitro, in vivo and clinical trials10.1016/j.jnoncrysol.2015.03.022 ↗
17. History and trends of bioactive glass-ceramics10.1002/jbm.a.35639 ↗
18. Highly bioactive P2O5–Na2O–CaO–SiO2 glass-ceramic10.1016/S0022-3093(01)00822-5 ↗
19. Histopathological, cytotoxicity and genotoxicity evaluation of Biosilicate® glass-ceramic scaffolds10.1002/jbm.a.34360 ↗
20. Biosilicate®—gelatine bone scaffolds by the foam replica technique: development and characterization10.1088/1468-6996/14/4/045008 ↗
21. Biosilicate® scaffolds produced by 3D-printing and direct foaming using preceramic polymers10.1111/jace.15948 ↗
22. Comparative analysis of wollastonite-diopside glass-ceramic structures fabricated via stereo-lithography10.1002/adem.201801160 ↗
23. Hench · 1993
24. Developing porous diopside/hydroxyapatite bio-composite scaffolds via a combination of freeze-drying and coating process10.1016/j.ceramint.2019.01.236 ↗
25. Induced crystallization porosity and properties of sintered diopside and wollastonite glass-ceramics10.1016/j.jeurceramsoc.2007.08.001 ↗
26. Gibson · 1999
27. Effects of bone substitute architecture and surface properties on cell response, angiogenesis, and structure of new bone10.1039/C7TB00741H ↗
28. Evaluations of cellular lattice structures manufactured using selective laser melting10.1016/j.ijmachtools.2012.06.002 ↗
29. Compressive behaviour of gyroid lattice structures for human cancellous bone implant applications10.1016/j.msec.2016.06.016 ↗
30. Novel additive manufacturing of photocurable ceramic slurry containing freezing vehicle as porogen for hierarchical porous structure10.1016/j.ceramint.2019.07.116 ↗