journal article·2021-08Open access

Paste extrusion 3D printing and characterization of lead zirconate titanate piezoelectric ceramics

Samuel E. Hall, Jaime E. Regis, Anabel Renteria, Luis A. Chavez, Luis Delfin, Sebastian Vargas, Michael R. Haberman, David Espalin, Ryan Wicker, Yirong Lin

Ceramics International· Volume 47· Issue 15

Abstract

Abstract The additive manufacturing of piezoelectric ceramic Lead Zirconate Titanate (PZT) through paste extrusion 3D printing was demonstrated. Different paste compositions with varied water weight content were studied to find a composition suitable for printing. The pastes were evaluated in terms of their viscosities, yield stresses, and stability when aged. Furthermore, the material properties of the ceramics produced through paste extrusion were characterized and compared with those of ceramics fabricated through a conventional die pressing method. Paste extruded PZT with achieved densities as high as 94.9% of the theoretical density after sintering, which nearly matched the 95% density attained by the pressed samples. Upon poling, the paste extruded PZT piezoelectric ceramics attained piezoelectric coefficients and dielectric constants that were close to the values of die pressed samples. As near full density PZT ceramics were successfully fabricated through paste extrusion, this work paves the way for piezoelectric ceramics with application-driven geometry designs for sensors, actuators, and energy harvesters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. High sensitivity ultrasonic sensor for hydrophone applications, using an epitaxial Pb(Zr,Ti)O3 film grown on SrRuO3/Pt/γ-Al2O3/Si10.1016/j.sna.2008.01.014 ↗
2. A reusable PZT transducer for monitoring initial hydration and structural health of concrete10.3390/s100505193 ↗
3. Multi-layered piezoelectric energy harvesters based on PZT ceramic actuators10.1016/j.ceramint.2015.03.180 ↗
4. Dielectric and piezoelectric properties of PZT ceramics doped with strontium and lanthanum10.1016/j.ceramint.2010.12.003 ↗
5. Different piezoelectric grain size effects in BaTiO310.1016/j.ceramint.2015.07.039 ↗
6. Piezoelectric component fabrication using projection-based stereolithography of barium titanate ceramic suspensions10.1108/RPJ-11-2015-0162 ↗
7. Three-dimensional printing of piezoelectric materials with designed anisotropy and directional response10.1038/s41563-018-0268-1 ↗
8. Additive manufacturing of ceramic-based materials10.1002/adem.201400097 ↗
9. 3D printing of ceramics: a review10.1016/j.jeurceramsoc.2018.11.013 ↗
10. Isostatic pressing assisted indirect selective laser sintering of alumina components10.1108/13552541211250409 ↗
11. Selective laser sintering of PZT ceramic powders10.1134/1.1262811 ↗
12. Fabrication of barium titanate by binder jetting additive manufacturing technology10.1016/j.ceramint.2015.01.108 ↗
13. PZT ceramics fabricated based on stereolithography for an ultrasound transducer array application10.1016/j.ceramint.2018.09.055 ↗
14. Ceramic robocasting: recent achievements, potential and future developments10.1002/adma.201802404 ↗
15. Fabrication and characterization of PZT suspensions for stereolithography based on 3D printing
16. Robocast Pb(Zr0.95Ti0.05)O3 ceramic monoliths and composites10.1111/j.1151-2916.2001.tb00756.x ↗
17. Freeze-form extrusion fabrication of ceramic parts10.1080/17452750600649609 ↗
18. High temperature strength of an ultra high temperature ceramic produced by additive manufacturing10.1016/j.ceramint.2019.05.032 ↗
19. Solvent-based paste extrusion solid freeforming10.1016/j.jeurceramsoc.2009.07.019 ↗
20. Evolution of porosity and geometrical quality through the ceramic extrusion additive manufacturing process stages
21. Binder jetting additive manufacturing of ceramics: a literature review
22. 3D printing with polymers: challenges among expanding options and opportunities10.1016/j.dental.2015.09.018 ↗
23. Crystal orientation dependence of piezoelectric properties of lead zirconate titanate near the morphotropic phase boundary10.1063/1.121373 ↗
24. Mechanism of crystal-symmetry dependent deformation in ferroelectric ceramics: experiments versus model10.1063/1.4809979 ↗
25. Influence of PbO stoichiometry on the properties of PZT ceramics and multilayer actuators10.1111/jace.16417 ↗
26. Safar
27. PZT-cobalt ferrite particulate composites: densification and lead loss controlled by quite-fast sintering10.1016/j.jeurceramsoc.2016.08.025 ↗
28. Electrical and piezoelectric behavior of polyamide/PZT/CNT multifunctional nanocomposites10.1002/adem.201300519 ↗
29. Effect of porosity on dielectric properties and microstructure of porous PZT ceramics10.1016/j.mseb.2005.10.003 ↗
30. Study of Dielectric and Piezoelectric composites of CNT reinforced PZT-PVA 0-3 composite10.1063/1.4946392 ↗