Crystallite size of pure tin oxide ceramics and its growth during sintering determined from XRD line broadening – A methodological case study and a practitioners’ guide
Source abstract
Abstract
Abstract Due to the dominance of non-densifying sintering mechanisms (surface diffusion and evaporation condensation) pure tin oxide ceramics exhibit unusual sintering behavior that allows sintering without shrinkage, i.e. without changes in porosity. It is therefore ideally suited for fundamental studies. In this paper we study the crystallite size and its changes as a function of temperature and dwell time via X-ray diffraction (XRD) line broadening. It is shown that, although the contribution of microstrain broadening is negligibly small, the difference between the different evaluation methods (Scherrer equation, Williamson-Hall plots, Halder-Wagner plot) is quite large. Nevertheless similar qualitative conclusions can be drawn irrespective of the specific evaluation method used (although Halder-Wagner analysis is most reasonable). Significant crystallite growth can be expected for pure tin oxide ceramics from nanosized powders only at temperatures above 1000 °C. Prolonging the dwell times beyond 3 h does not affect the crystallite size to any significant degree.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · ZnO doping and properties · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Charge compensation and electrical characteristics of Ta2O5–doped SnO2–CoO ceramics10.1016/j.jeurceramsoc.2019.09.028 ↗
2. Effects of Ta2O5 on the grain size and electrical properties of SnO2-based varistors10.1088/0022-3727/36/23/031 ↗
3. Effects of CuO on the grain size and electrical properties of SnO2-based varistors10.1016/j.mseb.2004.09.009 ↗
4. Grain size effect on the universality of AC conductivity in SnO210.1016/S0022-3697(02)00368-2 ↗
5. The effect of post annealing temperature on grain size of indium-tin-oxide for optical and electrical properties improvement
6. Electrical characteristics of SnO2 voltage-sensitive ceramics doped with Ni2O310.1016/j.mssp.2020.105418 ↗
7. Crystallite size effect on the conductivity of the ultradisperse ceramics of SnO2 and In2O310.1070/MC2004v014n04ABEH001969 ↗
8. Advanced indium-tin oxide ceramics for sputtering targets10.1016/j.ceramint.2007.02.015 ↗
9. Effect of Mn doping on structural and optical properties of SnO2 nanoparticles prepared by mechanochemical processing10.1016/j.phpro.2012.03.077 ↗
10. Influence of grain size on the thermal conductivity of tin oxide ceramics10.1016/S0955-2219(99)00171-5 ↗
11. Thermoelectric properties of dense Sb-doped SnO2 ceramics10.1016/j.jallcom.2016.09.062 ↗
12. Tin oxide-based ceramics of high density obtained by pressureless sintering10.1016/j.ceramint.2017.03.185 ↗
13. Electrical properties under polluting gas (CO) of Pt and Pd doped polycrystalline SnO2 thin films10.1016/S0925-4005(99)00222-1 ↗
14. Nanocrystalline SnO gas sensors in view of surface reactions and modifications
15. A new method to control particle size and particle size distribution of SnO2 nanoparticles for gas sensor applications10.1002/1521-4095(200006)12:13<965::AID-ADMA965>3.0.CO;2-7 ↗
16. Morphology and gas-sensing properties of tin oxide foams with dual pore structure10.1007/s11664-016-5242-6 ↗
17. Grain size effects on gas sensitivity of porous SnO2-based elements10.1016/0925-4005(91)80207-Z ↗
18. Effect of particle size and dopant on properties of SnO2-based gas sensors10.1016/S0925-4005(00)00528-1 ↗
19. Photocatalytic activity of TiO2/SnO2 nanostructures with controlled dimensionality/complexity10.1016/j.apsusc.2018.11.226 ↗
20. Sintering of ultrafine undoped SnO2 powder10.1016/S0955-2219(00)00250-8 ↗
21. Bestimmung der Grösse und der inneren Struktur von Kolloidteilchen mittels Röntgenstrahlen
22. X-ray line broadening in metals10.1088/0370-1298/62/11/110 ↗
23. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
24. Separation of particle size and lattice strain in integral breadth measurements10.1107/S0365110X66000628 ↗
25. Analysis of the broadening of powder pattern peaks using variance, integral breadth, and Fourier coefficients of the line profile10.1154/S037603080000344X ↗
26. Scherrer after sixty years – a survey and some new results in the determination of crystallite size10.1107/S0021889878012844 ↗
27. Microstructural properties – lattice defects and domain size effects
28. Klug · 1974 · 618
29. 2008
30. 2004
31. Kisi · 2008
32. Diffraction line broadening due to lattice-parameter variations caused by a spatially varying scalar variable: its orientation dependence caused by locally varying nitrogen content in ϵ-FeN0.43310.1107/S0021889803026906 ↗
33. Krivoglaz · 1996
34. Wilkens · 1970 · 1195
35. Substructure analysis in heavily deformed materials by diffraction methods10.1002/adem.200400125 ↗
36. Wilson · 1962
37. Warren · 1969
38. Guinier · 1963
39. 1999
40. Simultaneous refinement of structure and microstructure of layered materials10.1107/S0021889803022787 ↗
41. The reflexion of X-rays from the ‘anti-phase nuclei’ of AuCu310.1098/rspa.1943.0013 ↗
42. The reflexion of X-rays from the ‘anti-phase nuclei’ of AuCu3 II10.1098/rspa.1966.0066 ↗
43. Diffraction whole-pattern modelling study of anti-phase domains in Cu3Au10.1016/j.actamat.2005.08.002 ↗
44. Grain surface relaxation effects in powder diffraction
45. Use of the Voigt function in a single-line method for the analysis of X-ray diffraction line broadening10.1107/S0021889882012035 ↗
46. A fundamental parameters approach to X-ray line-profile fitting10.1107/S0021889891010804 ↗
47. Gregg · 1982
48. Effect of Aloevera on synthesis of nano tin (IV) oxide
49. Effect of Pd ion doping in the band gap of SnO2 nanoparticles – structural and optical properties10.1007/s11051-013-1999-1 ↗
50. Zn doping effect on the properties od SnO2 nanostructure by co-precipitation technique10.1007/s00339-019-2695-5 ↗
51. X-ray studies of deformed metals10.1016/0502-8205(59)90015-2 ↗
52. Application of the Debye function to systems of crystallites10.1080/14786435.2010.501769 ↗
53. The breadth and shape of instrumental line profiles in high-resolution powder diffraction10.1107/S0021889891004375 ↗
54. Metrological characterization of X-ray diffraction methods at different acquisition geometries for determination of crystallite size in nano-scale materials10.1016/j.matchar.2013.09.002 ↗
55. Pitfalls in the characterization of nanoporous and nanosized materials10.1039/c0nr00561d ↗
56. Mean values, moments, moment ratios and a generalized mean value theorem for size distributions10.13168/cs.2019.0039 ↗
57. Diffraction line profiles from polydisperse crystalline systems10.1107/S0108767301008881 ↗
58. Effect of a crystallite size distribution on X-ray diffraction line profiles and whole-powder-pattern fitting10.1107/S002188980000460X ↗
59. Diffraction peak profiles from spherical crystallites with lognormal size distribution10.1107/S0021889803011580 ↗
60. Implementation of the Williamson-Hall and halder-wagner methods into RIETAN-FP