journal article·2022-01

Design, fabrication, microstructure, and properties of highly porous alumina whisker foam ceramic

Juntao Wu, Hongyu Chen, Xi Luo, Baotong Hu, Shuai Fu, Detian Wan, Yiwang Bao, Qingguo Feng, Salvatore Grasso, Chunfeng Hu

Ceramics International· Volume 48· Issue 2
Publisher page

Abstract

Abstract In this study, a new type of highly porous ceramic was successfully fabricated from α-Al2O3 whiskers and nano-sized Al2O3 particle slurry by vacuum infiltration with the subsequent annealing in air. It was found that with an increase in the alumina slurry amount or sintering temperature, the porosity of the foam ceramic decreased while its compressive strength increased. The optimal alumina slurry content and sintering temperature were equal to 4 g, and 1350 °C, respectively. The as-synthesised porous foam ceramic exhibited a low density of 0.65 g/cm3, high porosity of 83.51%, high compressive strength of 3.84 MPa, and low thermal conductivity of 1.37 W/m⋅K at room temperature, suggesting its potential applications in high-temperature gas filtration and thermal insulation materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production · Nuclear materials and radiation effects

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Scheffler · 2005 · 31
2. A petrographic examination of potsherds from ancient troy10.2307/499386 ↗
3. Iron, prehistoric and ancient10.2307/498191 ↗
4. Porous ceramics: light in weight but heavy in energy and environment technologies10.1016/j.mser.2020.100589 ↗
5. Porous and dense hafnium and zirconium ultra-high temperature ceramics for solar receivers10.1016/j.optmat.2013.08.020 ↗
6. Sergeys · 1973
7. Sound absorption characteristics of A high-temperature sintering porous ceramic material10.1016/j.apacoust.2012.01.004 ↗
8. Activated carbons developed from surplus sewage sludge for the removal of dyes from dilute aqueous solutions10.1016/S1385-8947(03)00054-8 ↗
9. Preparation and characterization of porous bioglass and PLLA scaffolds for tissue engineering applications10.1111/j.1551-2916.2012.05071.x ↗
10. Suitability of biosilicate glass-ceramic powder for additive manufacturing of highly porous scaffolds10.1016/j.ceramint.2020.11.179 ↗
11. Porosity features and gas permeability analysis of Bi-modal porous alumina and mullite for filtration applications10.1016/j.ceramint.2016.09.009 ↗
12. Thermal conductivity of porous alumina ceramics prepared using starch as A pore-forming agent10.1016/j.jeurceramsoc.2008.06.018 ↗
13. Phase evolution and properties of novel Al2O3-based poly-hollow microsphere (PHM) ceramics10.1007/s40145-016-0187-z ↗
14. Production and properties of low density engineering ceramic foams
15. Processing routes to macroporous ceramics: a review10.1111/j.1551-2916.2006.01044.x ↗
16. Al2O3-TiO2/ZrO2-SiO2 based porous ceramics from particle-stabilized wet foam10.1007/s40145-017-0225-5 ↗
17. Preparation and properties of porous alumina ceramics with oriented pores10.4028/www.scientific.net/KEM.317-318.689 ↗
18. Porous silica by the sol-gel process
19. Sol-gel derived porous ultra-high temperature ceramics10.1007/s40145-019-0332-6 ↗
20. Synthesis of porous ceramics with complex pore structure by freeze-dry processing10.1111/j.1151-2916.2001.tb00638.x ↗
21. Microstructure and mechanical properties of ZrB2-SiC porous ceramic by camphene-based freeze casting10.1016/j.ceramint.2012.07.012 ↗
22. Certain principles of formation of porous ceramic structures. Properties and applications10.1023/B:GLAC.0000008227.85944.64 ↗
23. Preparation and performance of ceramic fiber filtration material for high temperature gas purification
24. Whiskers of Al2O3 as reinforcement of A powder metallurgical 6061 aluminium matrix composite10.1016/j.matlet.2007.04.080 ↗
25. Optimal design on the high-temperature mechanical properties of porous alumina ceramics based on fractal dimension analysis10.1007/s40145-018-0260-x ↗
26. Thermal conductivity of dense and porous yttria-stabilized zirconia10.1023/A:1017970924312 ↗
27. Influence of HfO2 alloying effect on microstructure and thermal conductivity of HoTaO4 ceramics10.1007/s40145-019-0336-2 ↗
28. An XPS study of compositional changes induced by argon ion bombardment of the LaPO4 surface10.1016/0042-207X(95)00180-8 ↗
29. Tunable morphology of aluminum oxide whiskers grown by hydrothermal method10.1016/j.ceramint.2018.05.072 ↗
30. The effect of preoxidation atmosphere on oxidation behavior and thermal cycle life of thermal barrier coatings10.1016/j.msea.2006.08.099 ↗
31. Microstructure and mechanical properties of porous alumina ceramic prepared by A combination of 3-D printing and sintering10.1016/j.ceramint.2016.05.027 ↗
32. Systemic analysis of MgO hydration effects on alumina-magnesia refractory castables10.1016/j.ceramint.2012.01.051 ↗
33. Spinel-containing alumina-based refractory castables10.1016/j.ceramint.2011.03.049 ↗
34. Formation of porous α-alumina from ammonium aluminum carbonate hydroxide whiskers10.1016/j.ceramint.2018.11.154 ↗
35. Microstructure and mechanical properties of spark plasma sintered zirconia-hydroxyapatite nano-composite powders10.1016/j.actamat.2005.01.039 ↗
36. Thermal conductivity of porous materials10.1557/jmr.2013.179 ↗
37. Effect of the pore volume fraction on the thermal conductivity and mechanical properties of kaolin-based foams10.1016/j.jeurceramsoc.2012.10.022 ↗
38. A study of effective thermal conduction in lightweight foam corundum refractories10.1023/B:REFR.0000016769.38505.80 ↗
39. Effects of the sintering temperature on the structure and properties of the alumina foamed ceramics10.1051/matecconf/20166704011 ↗
40. Preparation of Al2O3-mullite thermal insulation materials with AlF3 and SiC as aids by microwave sintering10.1111/ijac.13547 ↗
41. Influence of pore distribution on the equivalent thermal conductivity of low porosity ceramic closed-cell foams10.1016/j.ceramint.2018.07.160 ↗